SINAUT ST7sc control center system (non-redundant or redundant) with connected ST7 and ST1 terminals

• The SCADA Connect Software SINAUT ST7sc permits the connection of telecontrol substations with ST7 and ST1 protocol to control center systems that can operate as OPC clients, e.g. iFIX from Intellution, InTouch from Wonderware, Micro SCADA from ABB.
• SINAUT ST7sc is also suitable for data exchange with other applications via OPC, e.g. with the Office application Excel.
• The OPC data can be exchanged either synchronously or asynchronously (change-controlled)
• The "Item Buffering" function prevents the loss of data on failure of the OPC client or if SINAUT terminals supply data at a faster rate than can be transferred via the OPC interface.
• System availability can be increased by connecting two ST7sc systems working in parallel to a redundant client system.
• SINAUT ST7sc additionally assumes the function of a telecontrol center. There is therefore no need for a separate SIMATIC S7-CPU for this function.