KVM Extender LWLVision, transmitter (top) and receiver (bottom)

The KVM extenders DVI‑Vision-CAT/Fiber, CATVision, LwLVision, DL‑Vision/DL‑Vision‑DP and DP‑Vision each consist of a transmitter and receiver in desktop or 19" design which are connected to one another by means of a CAT cable (5/6/7) or a fiber-optic cable. They are independent of the system platform and the operating system. An operator station can be set up at both the transmitter and receiver (local console for maintenance directly on the computer).

DL‑Vision/DL‑Vision‑DP and DP‑Vision have a redundant power supply. The other KVM extenders are also optionally available with a redundant power supply. If a power supply fails, the redundant supply unit immediately takes over. The connection to the computer is thus retained without interruption.

The standard interfaces are used for the computer connection. Neither software settings nor computer adjustments are necessary.

DL‑Vision/DL‑Vision‑DP and DP‑Vision have two network connections, a Web interface, and a monitoring function. This enables both simple configuration as well as monitoring and reporting of monitoring values via the web interface.

The KVM Extender DL‑Vision, DL‑Vision‑DP, DVI‑Vision-CAT/Fiber and DP‑Vision feature a screen freeze function. If a monitor loses the video signal or if there is a problem with the graphic controller of the remote computer, the screen freeze function freezes the last displayed image.

All KVM Extenders support multi-channel operation with 2 or up to 4 video signals. Depending on the multi-monitor graphic cards of the computer and the selected KVM extender, it is possible to implement multi-monitor operator stations with up to 4 screens each.

By means of an KVM switch, local maintenance by an administrator can be centralized in the control room.

KVM extender DL-Vision-DP, receiver, rear view