Siemens
01 2018
(4872) 700-366
skenergo@mail.ru

Article number

6ES7317-2AK14-0AB0

CPU317-2 DP, 1 MB

General information

HW functional status

01

Firmware version

V3.3

Engineering with

  • Programming package

STEP 7 as of V5.5 + SP1 or STEP 7 V5.2 + SP1 or higher with HSP 202

Supply voltage

Rated value (DC)

  • 24 V DC

Yes

permissible range, lower limit (DC)

19.2V

permissible range, upper limit (DC)

28.8V

external protection for power supply lines (recommendation)

2 A min.

Mains buffering

  • Mains/voltage failure stored energy time

5ms

  • Repeat rate, min.

1s

Input current

Current consumption (rated value)

870mA

Current consumption (in no-load operation), typ.

120mA

Inrush current, typ.

4A

It

1As

Power loss

Power loss, typ.

4.5W

Memory

Work memory

  • integrated

1024kbyte

  • expandable

No

  • Size of retentive memory for retentive data blocks

256kbyte

Load memory

  • Plug-in (MMC)

Yes

  • Plug-in (MMC), max.

8Mbyte

  • Data management on MMC (after last programming), min.

10y

Backup

  • present

Yes; Guaranteed by MMC (maintenance-free)

  • without battery

Yes; Program and data

CPU processing times

for bit operations, typ.

0.025s

for word operations, typ.

0.03s

for fixed point arithmetic, typ.

0.04s

for floating point arithmetic, typ.

0.16s

CPU-blocks

Number of blocks (total)

2048; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.

DB

  • Number, max.

2048; Number range: 1 to 16000

  • Size, max.

64kbyte

FB

  • Number, max.

2048; Number range: 0 to 7999

  • Size, max.

64kbyte

FC

  • Number, max.

2048; Number range: 0 to 7999

  • Size, max.

64kbyte

OB

  • Description

see instruction list

  • Size, max.

64kbyte

  • Number of free cycle OBs

1; OB 1

  • Number of time alarm OBs

1; OB 10

  • Number of delay alarm OBs

2; OB 20, 21

  • Number of cyclic interrupt OBs

4; OB 32, 33, 34, 35

  • Number of process alarm OBs

1; OB 40

  • Number of DPV1 alarm OBs

3; OB 55, 56, 57

  • Number of isochronous mode OBs

1; OB 61

  • Number of startup OBs

1; OB 100

  • Number of asynchronous error OBs

5; OB 80, 82, 85, 86, 87

  • Number of synchronous error OBs

2; OB 121, 122

Nesting depth

  • per priority class

16

  • additional within an error OB

4

Counters, timers and their retentivity

S7 counter

  • Number

512

Retentivity

  • adjustable

Yes

  • lower limit

0

  • upper limit

511

  • preset

Z 0 to Z 7

Counting range

  • lower limit

0

  • upper limit

999

IEC counter

  • Number

Unlimited (limited only by RAM capacity)

S7 times

  • Number

512

Retentivity

  • adjustable

Yes

  • lower limit

0

  • upper limit

511

  • preset

No retentivity

Time range

  • lower limit

10ms

  • upper limit

9990s

IEC timer

  • present

Yes

  • Type

SFB

  • Number

Unlimited (limited only by RAM capacity)

Data areas and their retentivity

retentive data area in total

All, max. 256 KB

Flag

  • Number, max.

4096byte

  • Retentivity available

Yes; From MB 0 to MB 4095

  • Retentivity preset

MB 0 to MB 15

  • Number of clock memories

8; 1 memory byte

Data blocks

  • Retentivity adjustable

Yes; via non-retain property on DB

  • Retentivity preset

Yes

Local data

  • per priority class, max.

32768byte; Max. 2048 bytes per block

Address area

I/O address area

  • Inputs

8192byte

  • Outputs

8192byte

of which distributed

  • Inputs

8192byte

  • Outputs

8192byte

Process image

  • Inputs

8192byte

  • Outputs

8192byte

  • Inputs, adjustable

8192byte

  • Outputs, adjustable

8192byte

  • Inputs, default

256byte

  • Outputs, default

256byte

Subprocess images

  • Number of subprocess images, max.

1

Digital channels

  • Inputs

65536

  • of which central

1024

  • Outputs

65536

  • of which central

1024

Analog channels

  • Inputs

4096

  • of which central

256

  • Outputs

4096

  • of which central

256

Hardware configuration

Number of expansion units, max.

3

Number of DP masters

  • integrated

2

  • via CP

4

Number of operable FMs and CPs (recommended)

  • FM

8

  • CP, PtP

8

  • CP, LAN

10

Rack

  • Racks, max.

4

  • Modules per rack, max.

8

Time of day

Clock

  • Hardware clock (real-time)

Yes

  • retentive and synchronizable

Yes

  • Backup time

6wk; At 40 C ambient temperature

  • Deviation per day, max.

10s; Typ.: 2 s

  • Behavior of the clock following POWER-ON

Clock continues running after POWER OFF

  • Behavior of the clock following expiry of backup period

Clock continues to run with the time at which the power failure occurred

Operating hours counter

  • Number

4

  • Number/Number range

0 to 3

  • Range of values

0 to 2^31 hours (when using SFC 101)

  • Granularity

1 hour

  • retentive

Yes; Must be restarted at each restart

Clock synchronization

  • supported

Yes

  • to MPI, master

Yes

  • to MPI, slave

Yes

  • to DP, master

Yes; With DP slave only slave clock

  • to DP, slave

Yes

  • in AS, master

Yes

  • in AS, slave

Yes

  • on Ethernet via NTP

No

Digital inputs

Number of digital inputs

0

Digital outputs

Number of digital outputs

0

Analog inputs

Number of analog inputs

0

Analog outputs

Number of analog outputs

0

Interfaces

Number of industrial Ethernet interfaces

0

Number of PROFINET interfaces

0

Number of RS 485 interfaces

2; Combined MPI / PROFIBUS DP and PROFIBUS DP

Number of RS 422 interfaces

0

1. Interface

Interface type

Integrated RS 485 interface

Physics

RS 485

Isolated

Yes

Power supply to interface (15 to 30 V DC), max.

200mA

Functionality

  • MPI

Yes

  • PROFIBUS DP master

Yes

  • PROFIBUS DP slave

Yes; A DP slave at both interfaces simultaneously is not possible

  • Point-to-point connection

No

MPI

  • Transmission rate, max.

12Mbit/s

Services

  • PG/OP communication

Yes

  • Routing

Yes

  • Global data communication

Yes

  • S7 basic communication

Yes

  • S7 communication

Yes; Only server, configured on one side

  • S7 communication, as client

No; but via CP and loadable FB

  • S7 communication, as server

Yes

DP master

  • Transmission rate, max.

12Mbit/s

  • Number of DP slaves, max.

124

Services

  • PG/OP communication

Yes

  • Routing

Yes

  • Global data communication

No

  • S7 basic communication

Yes; I blocks only

  • S7 communication

Yes; Only server, configured on one side

  • S7 communication, as client

No

  • S7 communication, as server

Yes

  • Equidistance

Yes

  • Isochronous mode

No

  • SYNC/FREEZE

Yes

  • Activation/deactivation of DP slaves

Yes

  • Number of DP slaves that can be simultaneously activated/deactivated, max.

8

  • Direct data exchange (slave-to-slave communication)

Yes; As subscriber

  • DPV1

Yes

Address area

  • Inputs, max.

8kbyte

  • Outputs, max.

8kbyte

User data per DP slave

  • Inputs, max.

244byte

  • Outputs, max.

244byte

DP slave

  • Transmission rate, max.

12Mbit/s

  • automatic baud rate search

Yes; only with passive interface

  • Address area, max.

32

  • User data per address area, max.

32byte

Services

  • PG/OP communication

Yes

  • Routing

Yes; Only with active interface

  • Global data communication

No

  • S7 basic communication

No

  • S7 communication

Yes; Only server, configured on one side

  • S7 communication, as client

No

  • S7 communication, as server

Yes; Connection configured on one side only

  • Direct data exchange (slave-to-slave communication)

Yes

  • DPV1

No

Transfer memory

  • Inputs

244byte

  • Outputs

244byte

2. Interface

Interface type

Integrated RS 485 interface

Physics

RS 485

Isolated

Yes

Power supply to interface (15 to 30 V DC), max.

200mA

Functionality

  • MPI

No

  • PROFIBUS DP master

Yes

  • PROFIBUS DP slave

Yes; A DP slave at both interfaces simultaneously is not possible

  • Point-to-point connection

No

DP master

  • Transmission rate, max.

12Mbit/s

  • Number of DP slaves, max.

124

Services

  • PG/OP communication

Yes

  • Routing

Yes

  • Global data communication

No

  • S7 basic communication

Yes; I blocks only

  • S7 communication

Yes; Only server, configured on one side

  • S7 communication, as client

No; but via CP and loadable FB

  • S7 communication, as server

Yes

  • Equidistance

Yes

  • Isochronous mode

Yes; OB 61

  • SYNC/FREEZE

Yes

  • Activation/deactivation of DP slaves

Yes

  • Number of DP slaves that can be simultaneously activated/deactivated, max.

8

  • Direct data exchange (slave-to-slave communication)

Yes; As subscriber

  • DPV1

Yes

Address area

  • Inputs, max.

8192byte

  • Outputs, max.

8192byte

User data per DP slave

  • Inputs, max.

244byte

  • Outputs, max.

244byte

DP slave

  • GSD file

The latest GSD file is available on the Internet (http://www.siemens.com/profibus-gsd)

  • Transmission rate, max.

12Mbit/s

  • automatic baud rate search

Yes; only with passive interface

  • Address area, max.

32

  • User data per address area, max.

32byte

Services

  • PG/OP communication

Yes

  • Routing

Yes; Only with active interface

  • Global data communication

No

  • S7 basic communication

No

  • S7 communication

Yes; Only server, configured on one side

  • S7 communication, as client

No; but via CP and loadable FB

  • S7 communication, as server

Yes

  • Direct data exchange (slave-to-slave communication)

Yes

  • DPV1

No

Transfer memory

  • Inputs

244byte

  • Outputs

244byte

Communication functions

PG/OP communication

Yes

Data record routing

Yes

Global data communication

  • supported

Yes

  • Number of GD loops, max.

8

  • Number of GD packets, max.

8

  • Number of GD packets, transmitter, max.

8

  • Number of GD packets, receiver, max.

8

  • Size of GD packets, max.

22byte

  • Size of GD packet (of which consistent), max.

22byte

S7 basic communication

  • supported

Yes

  • User data per job, max.

76byte

  • User data per job (of which consistent), max.

76byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)

S7 communication

  • supported

Yes

  • as server

Yes

  • as client

Yes; Via CP and loadable FB

  • User data per job, max.

See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication)

S5 compatible communication

  • supported

Yes; via CP and loadable FC

Number of connections

  • overall

32

  • usable for PG communication

31

  • reserved for PG communication

1

  • adjustable for PG communication, min.

1

  • adjustable for PG communication, max.

31

  • usable for OP communication

31

  • reserved for OP communication

1

  • adjustable for OP communication, min.

1

  • adjustable for OP communication, max.

31

  • usable for S7 basic communication

30

  • reserved for S7 basic communication

0

  • adjustable for S7 basic communication, min.

0

  • adjustable for S7 basic communication, max.

30

  • usable for routing

X1 as a MPI, max. 10; X1 as DP Master max. 24; X1 as DP Slave (active) max. 14; X2 as DP Master max. 24; X2 as DP Slave (active) max. 14

S7 message functions

Number of login stations for message functions, max.

32; Depending on the configured connections for PG/OP and S7 basic communication

Process diagnostic messages

Yes

simultaneously active Alarm-S blocks, max.

300

Test commissioning functions

Status block

Yes; Up to 2 simultaneously

Single step

Yes

Number of breakpoints

4

Status/control

  • Status/control variable

Yes

  • Variables

Inputs, outputs, memory bits, DB, times, counters

  • Number of variables, max.

30

  • of which status variables, max.

30

  • of which control variables, max.

14

Forcing

  • Forcing

Yes

  • Forcing, variables

Inputs, outputs

  • Number of variables, max.

10

Diagnostic buffer

  • present

Yes

  • Number of entries, max.

500

  • adjustable

No

  • of which powerfail-proof

100; Only the last 100 entries are retained

  • Number of entries readable in RUN, max.

499

  • can be set

Yes; From 10 to 499

  • preset

10

Service data

  • can be read out

Yes

Ambient conditions

Ambient temperature during operation

  • min.

0C

  • max.

60C

Configuration

Configuration software

  • STEP 7

Yes; STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203

  • STEP 7 Lite

No

Programming

  • Command set

see instruction list

  • Nesting levels

8

  • System functions (SFC)

see instruction list

  • System function blocks (SFB)

see instruction list

Programming language

  • LAD

Yes

  • FBD

Yes

  • STL

Yes

  • SCL

Yes

  • CFC

Yes

  • GRAPH

Yes

  • HiGraph

Yes

Know-how protection

  • User program protection/password protection

Yes

  • Block encryption

Yes; With S7 block Privacy

Dimensions

Width

40mm

Height

125mm

Depth

130mm

Weights

Weight, approx.

360g


















skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS -

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK -

  © " " 2007-2022
  (4872) 700-366  skenergo@mail.ru
.