Supply voltage | | |
Load voltage L+ | | |
| 24 V | 24 V |
| | Yes |
Input current | | |
from supply and load voltage L+ (without load), max. | 110 mA | 80 mA |
from backplane bus 5 V DC, max. | 55 mA | 60 mA |
Power loss | | |
Power loss, typ. | 3 W | 2 W |
Analog inputs | | |
Number of analog inputs | 4 | 4 |
| 4 | 2 |
| | 4 |
permissible input voltage for voltage input (destruction limit), max. | 20 V | 20 V; continuous; 75 V for max. 1 s (mark to space ratio 1:20) |
permissible input current for current input (destruction limit), max. | 40 mA | |
Cycle time (all channels) max. | 5 ms | 85 ms |
Input ranges | | |
| Yes | Yes |
| Yes | No |
| No | No |
| No | Yes |
| No | Yes |
Input ranges (rated values), voltages | | |
| Yes | Yes |
| 100 kΩ | 100 kΩ |
Input ranges (rated values), currents | | |
| Yes | |
| 50 Ω | |
Input ranges (rated values), resistance thermometer | | |
| | Yes; only climatic range |
Input ranges (rated values), resistors | | |
| | Yes |
Analog outputs | | |
Number of analog outputs | 2 | 2 |
Voltage output, short-circuit protection | Yes | Yes |
Voltage output, short-circuit current, max. | 11 mA | 30 mA |
Current output, no-load voltage, max. | 15 V | |
Output ranges, voltage | | |
| Yes | Yes |
Output ranges, current | | |
| Yes | |
Load impedance (in rated range of output) | | |
| 5 kΩ | 2.5 kΩ |
| 1 µF | 1 µF |
| 300 Ω | |
| 1 mH | |
Cable length | | |
| 200 m | 100 m |
Analog value generation for the inputs | | |
Integration and conversion time/resolution per channel | | |
| 8 bit | 12 bit |
| | 16,67 / 20 ms |
Analog value generation for the outputs | | |
Integration and conversion time/resolution per channel | | |
| 8 bit | 12 bit |
Settling time | | |
| 0.3 ms | 0.8 ms |
| 3 ms | 0.8 ms |
| 0.3 ms | |
Encoder | | |
Connection of signal encoders | | |
| No | |
| Yes | |
| | Yes |
| | Yes |
| | Yes |
Errors/accuracies | | |
Operational error limit in overall temperature range | | |
| 0.9 % | 0.7 %; 0 to 10V |
| 0.8 % | |
| | 3.5 %; 10 kOhm |
| | 1 % |
| 0.6 % | 1 % |
| 1 % | |
Basic error limit (operational limit at 25 °C) | | |
| 0.7 % | 0.5 %; 0 to 10V |
| 0.6 % | |
| | 2.8 %; 10 kOhm |
| | 0.8 % |
| 0.5 % | 0.85 % |
| 0.5 % | |
Interrupts/diagnostics/status information | | |
Alarms | No | No |
Diagnostic functions | No | No |
Potential separation | | |
Potential separation analog inputs | | |
| No | Yes |
Potential separation analog outputs | | |
| No | Yes |
Isolation | | |
Isolation tested with | 500 V DC | 500 V DC |
Connection method | | |
required front connector | 20-pin | 20-pin |
Dimensions | | |
Width | 40 mm | 40 mm |
Height | 125 mm | 125 mm |
Depth | 117 mm | 117 mm |
Weights | | |
Weight, approx. | 285 g | 200 g |