CP 443-5 Extended . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на CP 443-5 Extended

| | | | | | | |

Article number		6GK7443-5DX05-0XE0
Product type designation		CP 443-5 Extended
Transmission rate
Transfer rate
в—Џ at the 1st interface acc. to PROFIBUS		9.6 kbit/s ... 12 Mbit/s
Interfaces
Number of interfaces acc. to Industrial Ethernet		0
Number of electrical connections
в—Џ at the 1st interface acc. to PROFIBUS		1
Type of electrical connection
в—Џ at the 1st interface acc. to PROFIBUS		9-pin Sub-D socket (RS485)
Supply voltage, current consumption, power loss
Type of voltage of the supply voltage		DC
Supply voltage 1 from backplane bus		5 V
Relative symmetrical tolerance at DC
в—Џ at 5 V		5 %
Consumed current
в—Џ from backplane bus at DC at 5 V typical		0.6 A
Power loss [W]		3 W
Permitted ambient conditions
Ambient temperature
в—Џ during operation		0 ... 60 °C
в—Џ during storage		-40 ... +70 °C
в—Џ during transport		-40 ... +70 °C
Relative humidity at 25 °C without condensation during operation maximum		95 %
Protection class IP		IP20
Design, dimensions and weight
Module format		Compact module S7-400 single width
Width		25 mm
Height		290 mm
Depth		210 mm
Net weight		0.65 kg
Product properties, functions, components general
Number of units
в—Џ per CPU maximum		14
в—Џ Note		The number of CPs that can be operated as DP masters depends on the number of CP 443-1 Advanced processors operating in the S7-400 station as PROFINET IO controllers. Up to 10 CPs can be operated in total: up to 4 as PROFINET IO controllers (CP 443-1 Advanced); up to 10 as DP masters (CP 443-5 Extended)
Performance data open communication
Number of possible connections for open communication by means of SEND/RECEIVE blocks maximum		32
Amount of data
в—Џ as user data per connection for open communication by means of SEND/RECEIVE blocks maximum		240 byte
Performance data PROFIBUS DP
Service as DP master
в—Џ DPV1		Yes
Number of DP slaves on DP master usable		125
Amount of data
в—Џ of the address area of the inputs as DP master total		4 096 byte
в—Џ of the address area of the outputs as DP master total		4 096 byte
в—Џ of the address area of the inputs per DP slave		244 byte
в—Џ of the address area of the outputs per DP slave		244 byte
Performance data S7 communication
Number of possible connections for S7 communication
в—Џ maximum		48
Performance data multi-protocol mode
Number of active connections with multi-protocol mode
в—Џ without DP maximum		59
в—Џ with DP maximum		54
Configuration software
в—Џ required		STEP 7 V5.4 SP4 or higher / STEP 7 Professional V12 (TIA Portal) or higher