SIMATIC WinAC RTX . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIMATIC WinAC RTX

| | | | | | | | |

Article number		6ES7671-0RC08-0YA0
		SIMATIC WINAC RTX 2010
General information
Firmware version		V4.6
Engineering with
в—Џ Programming package		STEP 7 V5.5 or higher / iMap V3.0 SP1; STEP 7 in TIA Portal V13 or higher
Memory
Type of memory		RAM
Work memory
в—Џ integrated (for program)		4 Mbyte; Adjustable; depends on Non Paged Memory Pool
в—Џ integrated (for data)		4 Mbyte; Adjustable; depends on Non Paged Memory Pool
Load memory
в—Џ integrated RAM, max.		8 Mbyte; Adjustable; depends on Non Paged Memory Pool
CPU processing times
for bit operations, typ.		0.004 µs; Typical
for fixed point arithmetic, typ.		0.003 µs; Typical
for floating point arithmetic, typ.		0.004 µs; Typical
Reference platform		Pentium 4, 2.4 GHz
CPU-blocks
DB
в—Џ Number, max.		65 535; Limited only by RAM set for data
в—Џ Size, max.		64 kbyte
FB
в—Џ Number, max.		65 536; Limited only by RAM set for code
в—Џ Size, max.		64 kbyte
FC
в—Џ Number, max.		65 536; Limited only by RAM set for code
в—Џ Size, max.		64 kbyte
OB
в—Џ Number, max.		Limited only by RAM set for code
в—Џ Size, max.		64 kbyte
в—Џ Number of free cycle OBs		1; OB 1
в—Џ Number of time alarm OBs		1; OB 10
в—Џ Number of delay alarm OBs		1; OB 20
в—Џ Number of cyclic interrupt OBs		9; OB 30-38
в—Џ Number of process alarm OBs		1; OB 40
в—Џ Number of ODK OBs		3; OB 52-54
в—Џ Number of DPV1 alarm OBs		3; OB 55-57
в—Џ Number of isochronous mode OBs		2; OB 61-62
в—Џ Number of startup OBs		2; OB 100, 102
в—Џ Number of asynchronous error OBs		7; OB 80, 82-85, 86, 88
в—Џ Number of synchronous error OBs		2; OB 121, 122
Nesting depth
в—Џ per priority class		24
в—Џ additional within an error OB		24
Counters, timers and their retentivity
S7 counter
в—Џ Number		2 048
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		2 047
вЂ” preset		8
Counting range
вЂ” can be set		Yes
вЂ” lower limit		0
вЂ” upper limit		999
IEC counter
в—Џ Number		Unlimited (limited only by RAM capacity)
S7 times
в—Џ Number		2 048
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		2 047
вЂ” preset		0
Time range
вЂ” lower limit		10 ms
вЂ” upper limit		9 990 s
IEC timer
в—Џ present		Yes
в—Џ Type		SFB
в—Џ Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
Retentivity without UPS and PS Extension Board		128 kbyte with SIMATIC IPC427C and HMI IPC477C; further SIMATIC PCs on request
Retentivity with UPS		all data
Flag
в—Џ Number, max.		16 kbyte
в—Џ of which retentive		MB 0 to MB 16383
в—Џ Retentivity preset		MB 0 to MB 15
в—Џ Number of clock memories		8
Data blocks
в—Џ Number, max.		Limited only by available retentive memory (NVRAM, or file storage)
в—Џ Size, max.		64 kbyte
в—Џ Retentivity adjustable		Yes; via non-retain property on DB
в—Џ Retentivity preset		Yes
Local data
в—Џ adjustable, max.		64 kbyte
в—Џ preset		32 kbyte
в—Џ per priority class, max.		61 440 byte
Address area
I/O address area
в—Џ Inputs		16 kbyte
в—Џ Outputs		16 kbyte
of which distributed
вЂ” DP interface, inputs		16 kbyte
вЂ” DP interface, outputs		16 kbyte
вЂ” PROFINET interface, inputs		16 kbyte
вЂ” PROFINET interface, outputs		16 kbyte
Process image
в—Џ Inputs, adjustable		8 kbyte; 16 KB with STEP 7 V5.5 SP3 or higher
в—Џ Outputs, adjustable		8 kbyte; 16 KB with STEP 7 V5.5 SP3 or higher
в—Џ Inputs, default		512 byte
в—Џ Outputs, default		512 byte
Subprocess images
в—Џ Number of subprocess images, max.		15
Digital channels
в—Џ Inputs		128 000
в—Џ Outputs		128 000
Analog channels
в—Џ Inputs		8 000
в—Џ Outputs		8 000
Number of operable FMs and CPs (recommended)
в—Џ FM		FM distributed: FM 350-1 / 350-2, FM 351, FM 352, FM 353, FM 355 / 355-2
в—Џ CP, PtP		2; CP 340, CP 341 distributed
в—Џ CP, LAN		Over PC CP
Submodules
в—Џ Number of submodules, max		4
вЂ” of which PROFIBUS, max.		4; Supported interfaces: see 1st and 2nd interface
вЂ” of which Industrial Ethernet, max.		1; Supported interfaces: see 3rd and 4th interface
Time of day
Clock
в—Џ Hardware clock (real-time)		Yes
в—Џ retentive and synchronizable		Yes
Operating hours counter
в—Џ Number		8
Clock synchronization
в—Џ supported		Yes
в—Џ to PC-CP, slave		Yes
в—Џ on Ethernet via NTP		Yes
1. Interface
Interface type		CP 5611, CP 5611-A2, CP 5612, CP 5621, CP 5622, integrated PROFIBUS interface of the SIMATIC PC
Physics		RS 485 / PROFIBUS
Isolated		Yes
Number of simultaneously operable CPs, max.		1
Power supply to interface (15 to 30 V DC), max.		does not exist
Functionality
в—Џ MPI		No
в—Џ PROFIBUS DP master		Yes
в—Џ PROFIBUS DP slave		No
DP master
в—Џ Number of connections, max.		8
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ Number of DP slaves, max.		64
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” Global data communication		No
вЂ” S7 basic communication		No
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		Yes
вЂ” S7 communication, as server		Yes
вЂ” Equidistance		Yes; Only in conjunction with isochronous mode
вЂ” Isochronous mode		Yes
вЂ” SYNC/FREEZE		Yes
вЂ” Activation/deactivation of DP slaves		Yes
вЂ” Direct data exchange (slave-to-slave communication)		Yes
вЂ” DPV0		Yes
вЂ” DPV1		Yes
Address area
вЂ” Inputs, max.		16 kbyte
вЂ” Outputs, max.		16 kbyte
User data per DP slave
вЂ” Inputs, max.		244 byte
вЂ” Outputs, max.		244 byte
2. Interface
Interface type		CP 5613, CP 5613-A2, CP 5613-A3, CP 5603, CP 5623
Physics		RS 485 / PROFIBUS
Isolated		Yes
Number of simultaneously operable CPs, max.		4
Functionality
в—Џ MPI		No
в—Џ PROFIBUS DP master		Yes
в—Џ PROFIBUS DP slave		No
DP master
в—Џ Number of connections, max.		50
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ Number of DP slaves, max.		125
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” Global data communication		No
вЂ” S7 basic communication		No
вЂ” S7 communication		Yes
вЂ” S7 communication, as client		Yes
вЂ” S7 communication, as server		Yes
вЂ” Equidistance		Yes; Only in conjunction with isochronous mode
вЂ” Isochronous mode		Yes
вЂ” SYNC/FREEZE		Yes
вЂ” Activation/deactivation of DP slaves		Yes
вЂ” Direct data exchange (slave-to-slave communication)		Yes
вЂ” DPV0		Yes
вЂ” DPV1		Yes
Address area
вЂ” Inputs, max.		16 kbyte
вЂ” Outputs, max.		16 kbyte
User data per DP slave
вЂ” Inputs, max.		244 byte
вЂ” Outputs, max.		244 byte
3. Interface
Interface type		PROFINET
Physics		Ethernet
Isolated		Yes
Number of simultaneously operable CPs, max.		1; Intel Pro/1000 (Intel 82571EB, 82573L, 82574L, 82541PI; non-shared IRQ required); Intel i210T; integrated IE interface SIMATIC PC IPC4x7C, IPC6x7C, IPC8x7C, IPC2x7D, IPC4x7D, IPC6x7D, IPC8x7D, IPC547E
automatic detection of transmission rate		Yes; 10/100 Mbit/s
Autonegotiation		Yes
Autocrossing		Yes
Interface types
в—Џ Number of ports		1
в—Џ integrated switch		No
Media redundancy
в—Џ supported		No
Functionality
в—Џ PROFINET IO Controller		Yes
в—Џ PROFINET IO Device		No
в—Џ PROFINET CBA		Yes
в—Џ Open IE communication		Yes
PROFINET IO Controller
в—Џ Transmission rate, max.		100 Mbit/s
Services
вЂ” PG/OP communication		Yes
вЂ” S7 routing		Yes
вЂ” S7 communication		Yes
вЂ” Isochronous mode		No
вЂ” Open IE communication		Yes
вЂ” IRT		No
вЂ” Prioritized startup		Yes
вЂ” Number of IO devices with prioritized startup, max.		32
вЂ” Number of connectable IO Devices for RT, max.		128
вЂ” of which in line, max.		128
вЂ” Activation/deactivation of IO Devices		Yes
вЂ” Number of IO Devices that can be simultaneously activated/deactivated, max.		8
вЂ” IO Devices changing during operation (partner ports), supported		Yes
вЂ” Device replacement without swap medium		Yes
вЂ” Send cycles		1 ms
вЂ” Updating time		1 to 512 ms (minimum value depends on communication share set for PROFINET I/O, on the number of I/O devices, and on the volume of configured user data)
Address area
вЂ” Inputs, max.		16 kbyte
вЂ” Outputs, max.		16 kbyte
вЂ” User data per address area, max.		2 kbyte
вЂ” User data consistency, max.		256 byte
PROFINET CBA
в—Џ acyclic transmission		Yes
в—Џ cyclic transmission		Yes
Open IE communication
в—Џ Number of connections, max.		32
в—Џ Local port numbers used at the system end		0, 20, 21, 23, 25, 80, 102, 135, 161, 8080, 34962, 34963, 34964, 65532, 65533, 65534, 65535
в—Џ Keep-alive function, supported		Yes
SIMATIC communication
в—Џ Number of connections, max.		16
4. Interface
Interface type		PROFINET
Physics		Ethernet
Isolated		Yes
Number of simultaneously operable CPs, max.		1; CP 1616 (hardware release 8 or higher), CP 1604 (hardware release 7 or higher), integrated PROFINET interface of SIMATIC IPC and S7-mEC
automatic detection of transmission rate		Yes; 10/100 Mbit/s
Autonegotiation		Yes
Autocrossing		Yes
Change of IP address at runtime, supported		Yes
Interface types
в—Џ Number of ports		3
в—Џ integrated switch		Yes
Media redundancy
в—Џ supported		Yes
в—Џ Switchover time on line break, typ.		200 ms
в—Џ Number of stations in the ring, max.		50
Functionality
в—Џ PROFINET IO Controller		Yes
в—Џ PROFINET IO Device		No
в—Џ PROFINET CBA		Yes
в—Џ Open IE communication		Yes
в—Џ Web server		Yes
PROFINET IO Controller
в—Џ Transmission rate, max.		100 Mbit/s
Services
вЂ” PG/OP communication		Yes
вЂ” S7 routing		Yes
вЂ” S7 communication		Yes
вЂ” Isochronous mode		Yes
вЂ” Open IE communication		Yes
вЂ” IRT		Yes
вЂ” Prioritized startup		Yes
вЂ” Number of IO devices with prioritized startup, max.		32
вЂ” Number of connectable IO Devices, max.		256
вЂ” Of which IO devices with IRT, max.		64
вЂ” of which in line, max.		32
вЂ” Number of IO Devices with IRT and the option "high flexibility"		64
вЂ” of which in line, max.		32
вЂ” Number of connectable IO Devices for RT, max.		256
вЂ” of which in line, max.		256
вЂ” Activation/deactivation of IO Devices		Yes
вЂ” Number of IO Devices that can be simultaneously activated/deactivated, max.		8
вЂ” IO Devices changing during operation (partner ports), supported		Yes
вЂ” Device replacement without swap medium		Yes
вЂ” Send cycles		250 µs, 500 µs, 1 ms
Address area
вЂ” User data per address area, max.		2 kbyte
Open IE communication
в—Џ Local port numbers used at the system end		0, 20, 21, 25, 80, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535
SIMATIC communication
в—Џ Number of connections, max.		32
Protocols
Open IE communication
в—Џ TCP/IP		Yes
вЂ” Data length for connection type 01H, max.		Not supported
вЂ” Data length for connection type 11H, max.		65 534 byte
вЂ” Data length, max.		65 534 byte
в—Џ ISO-on-TCP (RFC1006)		Yes
вЂ” Data length, max.		65 534 byte
в—Џ UDP		Yes
вЂ” Data length, max.		1 472 byte
Web server
в—Џ User-defined websites		No
в—Џ Number of HTTP clients		2
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes
Equidistance		Yes
Number of DP masters with isochronous mode		2
User data per isochronous slave, max.		128 byte
shortest clock pulse		2.2 ms; 2.2 ms without partial process image; 2.2 ms with partial process image
Communication functions
PG/OP communication		Yes
Data record routing		Yes; only with CP 5611 or integrated PROFIBUS interface of the SIMATIC PC
Global data communication
в—Џ supported		No
S7 basic communication
в—Џ supported		No
S7 communication
в—Џ supported		Yes
в—Џ as server		Yes
в—Џ as client		Yes
в—Џ User data per job, max.		64 kbyte; when using BSEND/USEND
Web server
в—Џ supported		Yes
PROFINET CBA (at set setpoint communication load)
в—Џ Setpoint for the CPU communication load		20 %
в—Џ Number of remote interconnection partners		64
в—Џ Number of functions, master/slave		30
в—Џ Total of all master/slave connections		1 000
в—Џ Data length of all incoming connections master/slave, max.		6 800 byte
в—Џ Data length of all outgoing connections master/slave, max.		6 800 byte
в—Џ Number of device-internal and PROFIBUS interconnections		500
в—Џ Data length of device-internal und PROFIBUS interconnections, max.		4 000 byte
в—Џ Data length per connection, max.		1 400 byte
Remote interconnections with acyclic transmission
вЂ” Sampling frequency: Sampling time, min.		500 ms
вЂ” Number of incoming interconnections		100
вЂ” Number of outgoing interconnections		100
вЂ” Data length of all incoming interconnections, max.		2 000 byte
вЂ” Data length of all outgoing interconnections, max.		2 000 byte
вЂ” Data length per connection, max.		1 400 byte
Remote interconnections with cyclic transmission
вЂ” Transmission frequency: Transmission interval, min.		10 ms
вЂ” Number of incoming interconnections		200
вЂ” Number of outgoing interconnections		200
вЂ” Data length of all incoming interconnections, max.		4 800 byte
вЂ” Data length of all outgoing interconnections, max.		4 800 byte
вЂ” Data length per connection, max.		250 byte
HMI variables via PROFINET (acyclic)
вЂ” Number of stations that can log on for HMI variables (PN OPC/iMap)		3
вЂ” HMI variable updating		500 ms
вЂ” Number of HMI variables		200
вЂ” Data length of all HMI variables, max.		2 000 byte
PROFIBUS proxy functionality
вЂ” supported		Yes
вЂ” Number of linked PROFIBUS devices		16
вЂ” Data length per connection, max.		240 byte; Slave-dependent
Number of connections
в—Џ overall		96
в—Џ usable for PG communication
вЂ” reserved for PG communication		1
в—Џ usable for OP communication
вЂ” reserved for OP communication		1
S7 message functions
Number of login stations for message functions, max.		62
SCAN procedure		No
Process diagnostic messages		Yes; ALARM_S, ALARM_SQ, ALARM_D, ALARM_DQ
simultaneously active Alarm-S blocks, max.		20; of a total of 20 for all SFCs
Alarm 8-blocks		Yes
в—Џ Number of instances for alarm 8 and S7 communication blocks, max.		4 000
Process control messages		No
Number of archives that can log on simultaneously (SFB 37 AR_SEND)		32
Test commissioning functions
Status block		Yes
Single step		Yes
Number of breakpoints		20
Status/control
в—Џ Status/control variable		Yes
Forcing
в—Џ Forcing		No
Diagnostic buffer
в—Џ present		Yes
в—Џ Number of entries, max.
вЂ” adjustable		Yes
вЂ” preset		120
Hardware requirement
Hardware required		PC with color monitor, keyboard, mouse or pointing device for Windows
Processor
в—Џ Processor		Intel Celeron M, 900 MHz or compatible
вЂ” Multi-processor system		Yes; Dual Pentium, CoreDuo, Core2Duo or compatible
вЂ” Hyper-threading		Yes
Lifetime of module
в—Џ Main memory, min.		1 Gbyte; WES7: 2 GB
в—Џ Required memory on hard disk		100 Mbyte
Operating systems
pre-installed operating system
в—Џ Windows NT 4.0		No
в—Џ Windows 2000		No
в—Џ Windows Vista		No
в—Џ Windows XP		Yes; Professional, SP2 and SP3
в—Џ Windows XP Embedded		Yes; With the delivery image of the SIMATIC PC
вЂ” supported HAL types under Windows XP		ACPI uniprocessor PC, ACPI multiprocessor PC, MPS multiprocessor PC
в—Џ Windows 7		Yes; Professional, Enterprise, Ultimate (only 32 bits)
в—Џ Windows Embedded Standard 7		Yes; With delivery image of SIMATIC PC (only 32-bit)
Configuration
Configuration software
в—Џ STEP 7		Yes; V5.5 and higher, Engineering Tools (optional)
Programming
в—Џ Nesting levels		8
Programming language
вЂ” LAD		Yes
вЂ” FBD		Yes
вЂ” STL		Yes
вЂ” SCL		Yes
вЂ” CFC		Yes
вЂ” GRAPH		Yes
вЂ” HiGraph®		Yes
Software libraries
вЂ” Easy Motion Control		Yes
вЂ” Software redundancy		Yes; As of V1.2, only operation of WinAC RTX with WinAC RTX
Number of simultaneously active SFCs
вЂ” DPSYC_FR		20; of a total of 20 for all SFCs
вЂ” D_ACT_DP		20; of a total of 20 for all SFCs
вЂ” RD_REC		20; of a total of 20 for all SFCs
вЂ” WR_REC		20; of a total of 20 for all SFCs
вЂ” WR_PARM		20; of a total of 20 for all SFCs
вЂ” PARM_MOD		20; of a total of 20 for all SFCs
вЂ” WR_DPARM		20; of a total of 20 for all SFCs
вЂ” DPNRM_DG		20; of a total of 20 for all SFCs
вЂ” RDSYSST		20; of a total of 20 for all SFCs
Number of simultaneously active SFBs
вЂ” RDREC		20; of a total of 20 for all SFBs
вЂ” WRREC		20; of a total of 20 for all SFBs
Know-how protection
в—Џ User program protection/password protection		Yes
в—Џ Block encryption		No
Open Development interfaces
в—Џ CCX (Custom Code Extension)		Yes; WinAC ODK V4.2 or higher
в—Џ CMI (Controller Management Interface)		Yes; WinAC ODK V4.2 or higher
в—Џ SMX (Shared Memory Extension)		Yes; WinAC ODK V4.2 or higher
вЂ” Inputs		4 kbyte
вЂ” Outputs		4 kbyte
Peripherals/Options
Peripherals		none
в—Џ Printer		No
Weights
Weight, approx.		100 g; With packaging

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания