CPU 313C-2 DP . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на CPU 313C-2 DP

| | | | | | |

Article number		6ES7313-6CG04-0AB0
		CPU313C-2 DP, 16DI/16DO, 128 KB
General information
HW functional status		01
Firmware version		V3.3
Engineering with
в—Џ Programming package		STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203
Supply voltage
Rated value (DC)
в—Џ 24 V DC		Yes
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
external protection for power supply lines (recommendation)		Miniature circuit breaker, type C; min. 2 A; miniature circuit breaker type B, min. 4 A
Mains buffering
в—Џ Mains/voltage failure stored energy time		5 ms
в—Џ Repeat rate, min.		1 s
Load voltage L+
Digital inputs
вЂ” Rated value (DC)		24 V
вЂ” Reverse polarity protection		Yes
Digital outputs
вЂ” Rated value (DC)		24 V
вЂ” Reverse polarity protection		No
Input current
Current consumption (rated value)		800 mA
Current consumption (in no-load operation), typ.		110 mA
Inrush current, typ.		5 A
IІt		0.7 AІ·s
Digital inputs
в—Џ from load voltage L+ (without load), max.		80 mA
Digital outputs
в—Џ from load voltage L+, max.		50 mA
Power loss
Power loss, typ.		9 W
Memory
Work memory
в—Џ integrated		128 kbyte
в—Џ expandable		No
в—Џ Size of retentive memory for retentive data blocks		64 kbyte
Load memory
в—Џ Plug-in (MMC)		Yes
в—Џ Plug-in (MMC), max.		8 Mbyte
в—Џ Data management on MMC (after last programming), min.		10 y
Backup
в—Џ present		Yes; Guaranteed by MMC (maintenance-free)
в—Џ without battery		Yes; Program and data
CPU processing times
for bit operations, typ.		0.07 µs
for word operations, typ.		0.15 µs
for fixed point arithmetic, typ.		0.2 µs
for floating point arithmetic, typ.		0.72 µs
CPU-blocks
Number of blocks (total)		1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
в—Џ Number, max.		1 024; Number range: 1 to 16000
в—Џ Size, max.		64 kbyte
FB
в—Џ Number, max.		1 024; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
FC
в—Џ Number, max.		1 024; Number range: 0 to 7999
в—Џ Size, max.		64 kbyte
OB
в—Џ Description		see instruction list
в—Џ Size, max.		64 kbyte
в—Џ Number of free cycle OBs		1; OB 1
в—Џ Number of time alarm OBs		1; OB 10
в—Џ Number of delay alarm OBs		2; OB 20, 21
в—Џ Number of cyclic interrupt OBs		4; OB 32, 33, 34, 35
в—Џ Number of process alarm OBs		1; OB 40
в—Џ Number of DPV1 alarm OBs		3; OB 55, 56, 57
в—Џ Number of startup OBs		1; OB 100
в—Џ Number of asynchronous error OBs		5; OB 80, 82, 85, 86, 87
в—Џ Number of synchronous error OBs		2; OB 121, 122
Nesting depth
в—Џ per priority class		16
в—Џ additional within an error OB		4
Counters, timers and their retentivity
S7 counter
в—Џ Number		256
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		255
вЂ” preset		Z 0 to Z 7
Counting range
вЂ” lower limit		0
вЂ” upper limit		999
IEC counter
в—Џ Number		Unlimited (limited only by RAM capacity)
S7 times
в—Џ Number		256
Retentivity
вЂ” adjustable		Yes
вЂ” lower limit		0
вЂ” upper limit		255
вЂ” preset		No retentivity
Time range
вЂ” lower limit		10 ms
вЂ” upper limit		9 990 s
IEC timer
в—Џ present		Yes
в—Џ Type		SFB
в—Џ Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total		All, max. 64 KB
Flag
в—Џ Number, max.		256 byte
в—Џ Retentivity available		Yes; MB 0 to MB 255
в—Џ Retentivity preset		MB 0 to MB 15
в—Џ Number of clock memories		8; 1 memory byte
Data blocks
в—Џ Retentivity adjustable		Yes; via non-retain property on DB
в—Џ Retentivity preset		Yes
Local data
в—Џ per priority class, max.		32 kbyte; Max. 2048 bytes per block
Address area
I/O address area
в—Џ Inputs		2 048 byte
в—Џ Outputs		2 048 byte
of which distributed
вЂ” Inputs		2 030 byte
вЂ” Outputs		2 030 byte
Process image
в—Џ Inputs		2 048 byte
в—Џ Outputs		2 048 byte
в—Џ Inputs, adjustable		2 048 byte
в—Џ Outputs, adjustable		2 048 byte
в—Џ Inputs, default		128 byte
в—Џ Outputs, default		128 byte
Default addresses of the integrated channels
вЂ” Digital inputs		124.0 to 125.7
вЂ” Digital outputs		124.0 to 125.7
Digital channels
в—Џ Inputs		16 256
вЂ” of which central		1 008
в—Џ Outputs		16 256
вЂ” of which central		1 008
Analog channels
в—Џ Inputs		1 015
вЂ” of which central		248
в—Џ Outputs		1 015
вЂ” of which central		248
Hardware configuration
Number of expansion units, max.		3
Number of DP masters
в—Џ integrated		1
в—Џ via CP		4
Number of operable FMs and CPs (recommended)
в—Џ FM		8
в—Џ CP, PtP		8
в—Џ CP, LAN		6
Rack
в—Џ Racks, max.		4
в—Џ Modules per rack, max.		8; In rack 3 max. 7
Time of day
Clock
в—Џ Hardware clock (real-time)		Yes
в—Џ retentive and synchronizable		Yes
в—Џ Backup time		6 wk; At 40 °C ambient temperature
в—Џ Deviation per day, max.		10 s; Typ.: 2 s
в—Џ Behavior of the clock following POWER-ON		Clock continues running after POWER OFF
в—Џ Behavior of the clock following expiry of backup period		Clock continues to run with the time at which the power failure occurred
Operating hours counter
в—Џ Number		1
в—Џ Number/Number range		0
в—Џ Range of values		0 to 2^31 hours (when using SFC 101)
в—Џ Granularity		1 hour
в—Џ retentive		Yes; Must be restarted at each restart
Clock synchronization
в—Џ supported		Yes
в—Џ to MPI, master		Yes
в—Џ to MPI, slave		Yes
в—Џ to DP, master		Yes; With DP slave only slave clock
в—Џ to DP, slave		Yes
в—Џ in AS, master		Yes
в—Џ in AS, slave		No
Digital inputs
Number of digital inputs		16
в—Џ of which inputs usable for technological functions		12
integrated channels (DI)		16
Input characteristic curve in accordance with IEC 61131, type 1		Yes
horizontal installation
вЂ” up to 40 °C, max.		16
вЂ” up to 60 °C, max.		8
vertical installation
вЂ” up to 40 °C, max.		8
Input voltage
в—Џ Rated value (DC)		24 V
в—Џ for signal "0"		-3 to +5V
в—Џ for signal "1"		+15 to +30V
Input current
в—Џ for signal "1", typ.		8 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” parameterizable		Yes; 0.1 / 0.3 / 3 / 15 ms (You can reconfigure the input delay of the standard inputs during program runtime. Please note that under certain circumstances your newly set filter time may not be effective until the next filter cycle.)
вЂ” Rated value		3 ms
for counter/technological functions
вЂ” at "0" to "1", max.		16 µs; Minimum pulse width/minimum pause between pulses at maximum counting frequency
Cable length
в—Џ shielded, max.		1 000 m; 100 m for technological functions
в—Џ unshielded, max.		600 m; For technological functions: No
for technological functions
вЂ” shielded, max.		100 m; at maximum count frequency
вЂ” unshielded, max.		not allowed
Digital outputs
Number of digital outputs		16
в—Џ of which high-speed outputs		4; Notice: You cannot connect the fast outputs of your CPU in parallel
integrated channels (DO)		16
Short-circuit protection		Yes; Clocked electronically
в—Џ Response threshold, typ.		1 A
Limitation of inductive shutdown voltage to		L+ (-48 V)
Controlling a digital input		Yes
Switching capacity of the outputs
в—Џ on lamp load, max.		5 W
Load resistance range
в—Џ lower limit		48 в„¦
в—Џ upper limit		4 kв„¦
Output voltage
в—Џ for signal "1", min.		L+ (-0.8 V)
Output current
в—Џ for signal "1" rated value		500 mA
в—Џ for signal "1" permissible range, min.		5 mA
в—Џ for signal "1" permissible range, max.		0.6 A
в—Џ for signal "1" minimum load current		5 mA
в—Џ for signal "0" residual current, max.		0.5 mA
Parallel switching of two outputs
в—Џ for uprating		No
в—Џ for redundant control of a load		Yes
Switching frequency
в—Џ with resistive load, max.		100 Hz
в—Џ with inductive load, max.		0.5 Hz
в—Џ on lamp load, max.		100 Hz
в—Џ of the pulse outputs, with resistive load, max.		2.5 kHz
horizontal installation
вЂ” up to 40 °C, max.		3 A
вЂ” up to 60 °C, max.		2 A
vertical installation
вЂ” up to 40 °C, max.		2 A
Cable length
в—Џ shielded, max.		1 000 m
в—Џ unshielded, max.		600 m
Analog inputs
Number of analog inputs		0
integrated channels (AI)		0
Analog outputs
Number of analog outputs		0
integrated channels (AO)		0
Connectable encoders
в—Џ 2-wire sensor		Yes
вЂ” permissible quiescent current (2-wire sensor), max.		1.5 mA
Interfaces
Number of industrial Ethernet interfaces		0
Number of PROFINET interfaces		0
Number of RS 485 interfaces		2; MPI and PROFIBUS DP
Number of RS 422 interfaces		0
1. Interface
Interface type		Integrated RS 485 interface
Physics		RS 485
Isolated		No
Power supply to interface (15 to 30 V DC), max.		200 mA
Functionality
в—Џ MPI		Yes
в—Џ PROFIBUS DP master		No
в—Џ PROFIBUS DP slave		No
в—Џ Point-to-point connection		No
MPI
в—Џ Transmission rate, max.		187.5 kbit/s
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” Global data communication		Yes
вЂ” S7 basic communication		Yes
вЂ” S7 communication		Yes; Only server, configured on one side
вЂ” S7 communication, as client		No; but via CP and loadable FB
вЂ” S7 communication, as server		Yes
2. Interface
Interface type		Integrated RS 485 interface
Physics		RS 485
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		200 mA
Functionality
в—Џ MPI		No
в—Џ PROFINET IO Controller		No
в—Џ PROFINET IO Device		No
в—Џ PROFINET CBA		No
в—Џ PROFIBUS DP master		Yes
в—Џ PROFIBUS DP slave		Yes
DP master
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ Number of DP slaves, max.		124
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes
вЂ” Global data communication		No
вЂ” S7 basic communication		Yes; I blocks only
вЂ” S7 communication		Yes; Yes (only server; connection configured at one end)
вЂ” S7 communication, as client		No
вЂ” S7 communication, as server		Yes
вЂ” Equidistance		Yes
вЂ” Isochronous mode		No
вЂ” SYNC/FREEZE		Yes
вЂ” Activation/deactivation of DP slaves		Yes
вЂ” Number of DP slaves that can be simultaneously activated/deactivated, max.		8
вЂ” Direct data exchange (slave-to-slave communication)		Yes; As subscriber
вЂ” DPV1		Yes
Address area
вЂ” Inputs, max.		2 kbyte
вЂ” Outputs, max.		2 kbyte
User data per DP slave
вЂ” Inputs, max.		244 byte
вЂ” Outputs, max.		244 byte
DP slave
в—Џ GSD file		The latest GSD file is available on the Internet (http://www.siemens.com/profibus-gsd)
в—Џ Transmission rate, max.		12 Mbit/s
в—Џ automatic baud rate search		Yes; only with passive interface
в—Џ Address area, max.		32
в—Џ User data per address area, max.		32 byte
Services
вЂ” PG/OP communication		Yes
вЂ” Routing		Yes; Only with active interface
вЂ” Global data communication		No
вЂ” S7 basic communication		No
вЂ” S7 communication		Yes; Yes (only server; connection configured at one end)
вЂ” S7 communication, as client		No
вЂ” S7 communication, as server		Yes
вЂ” Direct data exchange (slave-to-slave communication)		Yes
вЂ” DPV1		No
Transfer memory
вЂ” Inputs		244 byte
вЂ” Outputs		244 byte
Communication functions
PG/OP communication		Yes
Data record routing		Yes
Global data communication
в—Џ supported		Yes
в—Џ Number of GD loops, max.		8
в—Џ Number of GD packets, max.		8
в—Џ Number of GD packets, transmitter, max.		8
в—Џ Number of GD packets, receiver, max.		8
в—Џ Size of GD packets, max.		22 byte
в—Џ Size of GD packet (of which consistent), max.		22 byte
S7 basic communication
в—Џ supported		Yes
в—Џ User data per job, max.		76 byte
в—Џ User data per job (of which consistent), max.		76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
в—Џ supported		Yes
в—Џ as server		Yes
в—Џ as client		Yes; Via CP and loadable FB
в—Џ User data per job, max.		180 kbyte; With PUT/GET
в—Џ User data per job (of which consistent), max.		240 byte; as server
S5 compatible communication
в—Џ supported		Yes; via CP and loadable FC
Number of connections
в—Џ overall		8
в—Џ usable for PG communication		7
вЂ” reserved for PG communication		1
вЂ” adjustable for PG communication, min.		1
вЂ” adjustable for PG communication, max.		7
в—Џ usable for OP communication		7
вЂ” reserved for OP communication		1
вЂ” adjustable for OP communication, min.		1
вЂ” adjustable for OP communication, max.		7
в—Џ usable for S7 basic communication		4
вЂ” reserved for S7 basic communication		0
вЂ” adjustable for S7 basic communication, min.		0
вЂ” adjustable for S7 basic communication, max.		4
в—Џ usable for routing		4; max.
S7 message functions
Number of login stations for message functions, max.		8; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages		Yes
simultaneously active Alarm-S blocks, max.		300
Test commissioning functions
Status block		Yes; Up to 2 simultaneously
Single step		Yes
Number of breakpoints		4
Status/control
в—Џ Status/control variable		Yes
в—Џ Variables		Inputs, outputs, memory bits, DB, times, counters
в—Џ Number of variables, max.		30
вЂ” of which status variables, max.		30
вЂ” of which control variables, max.		14
Forcing
в—Џ Forcing		Yes
в—Џ Forcing, variables		Inputs, outputs
в—Џ Number of variables, max.		10
Diagnostic buffer
в—Џ present		Yes
в—Џ Number of entries, max.		500
вЂ” adjustable		No
вЂ” of which powerfail-proof		100; Only the last 100 entries are retained
в—Џ Number of entries readable in RUN, max.		499
вЂ” can be set		Yes; From 10 to 499
вЂ” preset		10
Service data
в—Џ can be read out		Yes
Interrupts/diagnostics/status information
Diagnostics indication LED
в—Џ Status indicator digital input (green)		Yes
в—Џ Status indicator digital output (green)		Yes
Integrated Functions
Number of counters		3; See "Technological Functions" manual
Counting frequency (counter) max.		30 kHz
Frequency measurement		Yes
Number of frequency meters		3; up to 30 kHz (see "Technological Functions" manual)
controlled positioning		No
integrated function blocks (closed-loop control)		Yes; PID controller (see "Technological Functions" manual)
PID controller		Yes
Number of pulse outputs		3; Pulse width modulation up to 2.5 kHz (see "Technological Functions" Manual)
Limit frequency (pulse)		2.5 kHz
Potential separation
Potential separation digital inputs
в—Џ Potential separation digital inputs		Yes
в—Џ between the channels		No
в—Џ between the channels and backplane bus		Yes
Potential separation digital outputs
в—Џ Potential separation digital outputs		Yes
в—Џ between the channels		Yes
в—Џ between the channels, in groups of		8
в—Џ between the channels and backplane bus		Yes
Isolation
Isolation tested with		600 V DC
Ambient conditions
Ambient temperature during operation
в—Џ min.		0 °C
в—Џ max.		60 °C
Configuration
Configuration software
в—Џ STEP 7		Yes; STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203
в—Џ STEP 7 Lite		No
Programming
в—Џ Command set		see instruction list
в—Џ Nesting levels		8
в—Џ System functions (SFC)		see instruction list
в—Џ System function blocks (SFB)		see instruction list
Programming language
вЂ” LAD		Yes
вЂ” FBD		Yes
вЂ” STL		Yes
вЂ” SCL		Yes
вЂ” CFC		Yes
вЂ” GRAPH		Yes
вЂ” HiGraph®		Yes
Know-how protection
в—Џ User program protection/password protection		Yes
в—Џ Block encryption		Yes; With S7 block Privacy
Dimensions
Width		80 mm
Height		125 mm
Depth		130 mm
Weights
Weight, approx.		500 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания