Image types

The optical path of the lens is defined by its construction.

For spherical lenses the solid angle depends on the focal length, focus adjustment, and aperture. All rays run through the focal point of the lens (central projection). Objects that are further away from the lens are depicted smaller. Objects that are closer to the lens are depicted larger:

The required image field size (height and width of the image), the size of the sensor chip and the focal length of the lens determine the operating distance:

A = (f x BF) / b

d = Operating distance (distance from lens to test object) in mm

f = Focal length of the lens in mm

IS = Size of image in the plane of the test object in mm

b = effective dimensions of the sensor in mm

In the case of lenses used in image processing systems, the focal length is fixed, whereas apertures and focus settings can be fixed. The focal length, the maximum focal aperture and the focusing range are normally specified on the lenses.

Focal distance

The focal length makes a statement about the angle of the image field or the ratio of the size of the real object to the size of the image.

The focal length of the lens is determined by the size of the required image field and the size of the camera chip when a specific distance has to be maintained. The most common chip sizes in cameras today are Ѕ", 1/3" and ј". If the distance to the object lies below the adjustable focusing range of the lens, i.e. at close range, the focus can be adjusted using intermediate rings.

Aperture

Reduction of the light intensity by interrupting the optical path.

Focus

Setting the focus of the lens to a specific distance.

Depth of field

Depth of field is the area within which (in front of and behind the object) that is displayed with sufficient sharpness of focus. The larger the aperture (the smaller the aperture number), the smaller the depth of field.

Lenses with a larger focal length have a smaller depth of field, the effect is considerable for images at close range.

Lens types

Lenses with smaller focal length are called wide-angle lenses, they can also be used at short operating distances, but produce intense distortion of the image. At a suitable given distance, they have a large image field.

Lenses with a long focal length are called telephoto lenses. They have a large magnification but cannot be focused at close range. So macro lenses are used that can be focused by means of large telescopic extensions or intermediate rings. At a given distance, they have a small image field.

In the case of telecentric lenses, at least the optical path at the object end is almost parallel (parallel projection). This means that objects at different distances are depicted in the same size. Objects can, however, only be displayed that are smaller than the diameter of the lens. It is not possible to adjust the range of focus with these lenses.

The optical characteristics can be restricted by means of optical filter glasses to counteract distortion in the image. Colored filters limit the spectral range, gray filters limit the light intensity and polarization filters restrict the transmission plane. Filters of this type can be attached either by using the internal thread or the flange on the front of the lens. The holder for the filter glass is designed to fit the lens.