6GK7443-1RX00-0XE0

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Communication processor for connecting a SIMATIC S7-400/S7-400H to Industrial Ethernet networks.

The CP supports:

• PG/OP communication
• S7 communication
• Open communication (SEND/RECEIVE)

The communications processor can be used in SIMATIC H systems and for fail-safe applications (PROFIsafe) in connection with an S7-400 F-CPU. The CPВ 443-1 RNA (Redundant Network Access) ¹⁾ offers the option of using the PRP procedure (Parallel Redundancy Protocol in accordance with IECВ 62439-3) to connect an S7-400 or S7-400H to parallel, separate networks where high availability is required.

The PRP functionality can be deactivated so that standard Industrial Ethernet communication is also possible with the CP.

The PRP redundancy procedure is based on double transmission of message frames over two separate networks (LANВ A, LANВ B). In the event of a fault in one of the two networks, transmission of the message frame from the second network is ensured without delay. A reconfiguration time (switchover of the communication paths) for the network, such as is required with other redundancy procedures, is thus not necessary.

¹⁾ At Siemens Industry, RNA stands for hardware and software to implement redundancy solutions. RNA contains the PRP V1 protocol in accordance with the IEC 62439-3 standard (Parallel Redundancy Protocol) as well as the HSR protocol in accordance with IEC 62439-3 (High-availability Seamless Redundancy Protocol).