6EP1961-3BA10

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Mounting bracket

The combination of a SITOP power supply and a 90В° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet (the width of the power supply becomes the depth, and the depth becomes the width). The mounting bracket is suitable for control cabinets with a depth of 320В mm or more.

Mounting adapter for standard mounting rail

The 1-phase 24В V/2В A (6ES7305-1BA80-0AA0) and 24В V/5В A (6ES7307-1EA80-0AA0) power supplies are special mechanical versions for SIMATICВ S7-300 and can be mounted on S7 rails.

A mounting adapter (6ES7390-6BA00-0AA0) for mounting on the standard mounting rail ENВ 60715 35x15 is separately available as an accessory.

The 24 V/ 2 A (6ES7307-1BA01-0AA0), 24 V/ 5 A (6ES7307-1EA01-0AA0) and 10 A (6ES7307-1KA02-0AA0) power supplies are variants for SIMATIC S7-300 and can be mounted on S7 rails.

A mounting adapter (6EP1971-1BA00) for installation on DIN rail EN 60715 35Г—15/7.5 is separately available as an accessory.

Connection plug for devices with degrees of protection IP65 and IP67

For the maintenance-free SITOP UPS500P DC UPS modules (6EP1933-2NC01, 6EP1933-2NC11) in IP65 degree of protection, a connector set (6EP1975-2ES00) for input and output and with a pre-assembled USB cable (2 m long) is available as an accessory.

Device labels

20 mm x 7 mm blank device labeling plates with article number 3RT1900-1SB20 (pastel turquoise) and article number 3RT2900-1SB20 (titanium gray) can be used for identification of the power supplies. The package unit comprises 340 labels on frames, 20 labels per frame. For usability, refer to "Accessories" in the technical data of the respective power supplies.