6ES7148-4CA00-0AA0

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

The power module PM-E DC 24 V is used within an ETВ 200pro station when generating 24В VВ DC load voltage groups for electronics modules.

You can position power modules in an ETВ 200pro station anywhere to the right of the interface module. The first power module is already integrated in the interface module.

Each power module installed in the ETВ 200pro remote I/O station interrupts the load voltage busbar and opens a new potential group (common potential) for the 2L+ load voltage supply. All subsequent load voltages of the electronics modules are fed from this power module. Each power module has a replaceable fuse for protecting the device. Only line protection according to DINВ VDE 0100 need be provided externally in addition.

The electronics/sensor supply 1L+ is not interrupted by the power module, it is looped through.

The power module is fitted on the associated bus module when delivered.