6DL1193-6PA00-0AA0

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Mounting rails

The mounting rail is required for fitting an ETВ 200SPВ HA station in the control cabinet. The IM carrier modules for interface modules, the carrier modules for the I/O modules and the server module are attached to the mounting rail.

The mounting rails are available in lengths of 482В mm (for installation in a 19-inch rack) and 1В 500В mm (for maximum configuration and vertical installation in a cabinet).

IM single carrier module

IM redundant carrier module

IM carrier modules for interface modules

Two versions of the IM carrier modules for interface modules are available:

• IM single carrier module for 1В interface module, for single connection to PROFINET
• IM redundant carrier module for 2В interface modules, for redundant connection to PROFINET

The IM carrier modules connect the interface module to the backplane bus. They enable data exchange with the I/O modules.

Carrier modules for I/O modules, 8-slot

Carrier modules for I/O modules, 2-slot

Carrier modules for I/O modules

The slots for the I/O modules are created by the connection of these carrier modules to the terminal blocks.

Carrier modules for I/O modules are available in the following versions:

• Carrier module, 2-slot, with 2В slots for I/O modules
• Carrier module, 8-slot, with 8В slots for I/O modules

ET 200SP HA, server module

Server module

Server module and power bus cover complete the design of the ETВ 200SPВ HA. A server module and a power bus cover are supplied with each IM carrier module for the interface module.