6AG1343-1EX30-7XE0

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

• Connection of SIMATICВ S7-300/SINUMERIK 840D powerline to Industrial Ethernet
  
  • 2 x RJ45 interface for 10/100 Mbps full/half-duplex connection with autosensing/autonegotiation and autocrossover function
  • Integrated 2-port real-time switch ERTEC
  • Multi-protocol operation with ISO, TCP, UDP transport protocol and PROFINET IO
  • Adjustable keep-alive function
• Communications services:
  • Open communication (ISO, TCP/IP, and UDP)
  • PROFINET IO controller or PROFINET IO device
  • PG/OP communication: Cross-network by means of S7 routing
  • S7 communication (client, server, multiplexing)
• Media redundancy (MRP);
  within an Ethernet network with ring topology, the CP supports the media redundancy procedure MRP (V2.2 or higher).
• Multicast for UDP
• IP address assignment via DHCP, simple PC tool or via the user program (e.g. HMI)
• Access protection via configurable access list
• Remote programming and commissioning via Industrial Ethernet
• Configuration with STEP 7
• Automatic setting of CPU clock setting over Ethernet with NTP or SIMATIC procedure
• Web diagnostics
• Integration in network management systems via SNMP (MIB2 diagnostics information)
• Diagnostics possibilities in STEP 7 and via web browser

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUSВ extreme-specific information was added.

For further technical documentation on SIPLUS, see:

http://www.siemens.com/siplus-extreme