6AG1207-1BQ40-7AA3

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

The analog AS-interface module of the compact series K60 collects or delivers analog signals on-site. These modules are connected to the primary controller via an AS-Interface master according to specification 2.1 or 3.0.

The analog modules are divided into five groups:

• Input module for current encoders
• Input module for voltage encoders
• Input module for thermal resistor encoders
• Output module for current actuators
• Output module for voltage actuators

The input modules according to profile 7.3/7.4 are available as modules with two or four input channels. Furthermore, the two-channel module may be converted for use as a single-channel one, thus achieving fast times until the analog value becomes available. The conversion is made using a bridge connector on socket 3. Transmission times twice as fast as those obtained with profile 7.3/7.4 may be achieved by the analog modules using profile 7.A.9. The ID1 code value determines whether the module is operated in one or two-channel mode.

The output modules are designed as standard as two-channel modules.

The input and output channels are electrically isolated from the AS-Interface network. Should sensors be connected with increased electricity demand, the auxiliary power supply may provide more energy as an alternative to internal power.

The manual describes the modules in great detail, including their technical data and detailed instructions for operation. A set of sample function blocks complete the manual.

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were adopted from the respective standard products. SIPLUSВ extreme specific information was added.

Technical documentation on SIPLUS can be found here:
http://www.siemens.de/siplus-extreme