6AG1204-2BB10-4AA3

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

• Connection of SIMATIC S7-400 to Industrial Ethernet
  • Multi-protocol operation for ISO, TCP/IP, UDP and PROFINET IO protocols
  • Adjustable keep-alive function
• Two separate interfaces (integrated network separation):
  • Gigabit interface with one RJ45 port with 10/100/1 000 Mbit/s, full/half-duplex with auto-sensing capability
  • PROFINET interface with four RJ45 ports with 10/100В Mbit/s, full/half duplex with autosensing and autocrossover functionality via integrated 4-port switch
• Communications services via both interfaces
  • Open communication (ISO, TCP/IP and UDP), multicast with UDP, including routing between both interfaces
  • PG/OP communication:
    Cross-network by means of S7 routing
  • S7 communication (client, server, multiplexing) including routing between both interfaces
  • IT communication:
    HTTP communication supports access to process data via own Web pages;
    e-mail client function, sending of e-mails with authentication directly from user program;
    FTP communication supports program-controlled FTP client communication;
    access to data blocks through FTP server
• Communications services via PROFINET interface
  • PROFINET IO controller with real-time properties (RT and IRT)
  • PROFINET CBA
  • IP address assignment via DHCP, simple PC tool or via the user program (e.g. HMI)
  • Support of the prioritized startup of PROFINET IO devices
  • Configuration with STEP 7
• Media redundancy (MRP);
  the CP supports the media redundancy procedure MRP within an Ethernet network with ring topology.
• Access protection by means of configurable IP access list
• Module replacement without programming device;
  all information is stored on the C-PLUG (also file system for IT functions)
• Extensive diagnostic functions for all modules in the rack
• Integration into network management systems through the support of SNMP V1 MIB-II
• Operation in the SIMATIC H system for redundant S7-communication
• Operation in fail-safe applications (PROFIsafe) in combination with SIMATIC S7-400 CPUВ 416F

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUSВ extreme specific information was added.

Technical documentation on SIPLUS can be found here:
http://www.siemens.de/siplus-extreme