6AG1193-6BP00-7DA1

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

With the BaseUnits, the ET 200SP offers a rugged and service-friendly design with permanent wiring:

• No tools needed for one-handed wiring using push-in terminals
• Outstanding access due to arrangement of measuring tap, spring NC contacts and cable entry in columns, while at the same time reducing the space required by 64%
• Fault-proof color coding of the spring NC contacts for better orientation in the terminal panel
• Replacement of I/O modules during operation without affecting the wiring
• Operation with module gaps (missing I/O module)
• Automatic coding of the I/O modules prevents destruction of the electronics if a module is accidentally inserted in the wrong slot during replacement
• High immunity to electromagnetic interference due to
  • self-assembling shielded backplane bus
  • multi-layer conductor plate with shield levels for interference-free signal transmission from the terminal to the I/O module
  • system-integrated, space-saving shield connection for quick installation
• Self-assembling potential groups without external wiring or jumpers
• Replaceable terminal box
• Side-by-side latching of the BUs for high mechanical load capacity
• Optional module-specific color identification of the terminals according to the color code CC
• Actuation of the spring NC contacts with a standard screwdriver, with a blade width up to 3.5В mm

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUSВ extreme-specific information was added.