3RK1903-0CJ00

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Accessories for motor starters, Standard

Control kit

The control kit for the Standard motor starter provides the possibility of testing the motor during start-up or service by actuating the motor starter protector. Using the control kit with the motor starter protector tripped, the contactor is mechanically locked in ON position.

Control unit

With the control unit the contactor coils of the Standard motor starter can be directly controlled using 24 V DC. The motor starter can thus be started as normal using a local control point without PLC or bus.

Note:

The control unit cannot be used in combination with the safety system or a brake control module.

DM-V15 distance module

• Passive module without bus connection and terminals
• Does not need a separate terminal module
• Follows a TM-DS45 or TM-RS90 or TM-xB if required
• Does not need to be taken into account when configuring the GSD file

The distance module is available for applications with high motor currents or high ambient temperatures involving Standard motor starters. It can be used to the right and left of a DS1-x direct-on-line starter or to the right of an xB1-4 brake module in order to improve heat removal to the side. The distance module is a completely passive module and does not need to be taken into account with regard to the control system during configuration. Details of the distance module can be found in the manual "SIMATIC ETВ 200S". If you have any further questions concerning the use of the distance module, contact Technical Support for Siemens Industrial Controls (Fax: +49 (0) 911/895-5907).

Accessories for High Feature motor starters

Control module 2DI LC COM

The 2DI control module is plugged onto the interface on the front of the motor starter. The module provides two inputs which can receive signals from the process and be assigned directly to the starter.

The functionality can be selected from a list of various control functions as part of the PROFIBUS parameterization. Local control point, emergency start and quick stop, for example, are available as functions. The signal levels can also be parameterized (NO/NC). For more extensive control functions the two inputs of a xB3 or x4 brake control module, which is plugged in alongside on the right, can be integrated in addition. The signal states of all inputs are transmitted in parallel with the internal use to the higher-level control system.

When a motor starter is replaced, the parameterization is automatically transmitted by download to the new starter. The inputs on the motor starter ensure autonomous operation, e. g. in the event of PLC failure, on the one hand and short response times through direct processing in the starter on the other hand. Another advantage results from the direct assignment of functions to modular machine concepts.

The 2DIВ LCВ COM control module has in addition a PC interface for connecting the Switch ES Motor Starter parameterization and diagnostics software (Version 2.0 and higher). The module works solely on High Feature motor starters with ES Motor Starter interface. The Logo!-PC cable is used as connecting cable between the 2DIВ LCВ COM control module and the High Feature motor starter.

Accessories for Standard and High Feature motor starters

PE/N bridge module

PE/N bridge modules are used to bridge gaps of the PE/N bus which are caused, for example, by using Brake Control Modules, PM-D(F) power modules or PM-X connection modules. If a bridge module is used, the supply must not be fed in anew. They are available in 15 mm and in 30 mm widths.

Bridge modules L123

The L123 bridge modules are used to bridge gaps in the power bus (see above). They are available in 15 mm and in 30 mm widths.

Brake control module

For motors with mechanical brake (see "ET 200S Motor Starters and Safety Motor Starters" --> "Overview")

Terminal modules for brake control modules

TM-xB terminal modules are used to accommodate the xB1, xB2, xB3 and xB4 brake control modules. The TM-xB terminal module must always follow directly after a terminal module for Standard motor starters, High Feature motor starters or frequency converters, as the solid-state braking switch is controlled via an output of the motor starter/frequency converter. The xB215 terminal modules for the brake control modules have not only the terminals for connecting the cable for the motor brake but also the terminals of the two local acting inputs. These local inputs are not evaluated by a frequency converter, which is why the xB215 terminal module can only be switched behind a motor starter.

Accessories for Standard, High Feature and Failsafe motor starters

PE/N terminal blocks

The PE/N terminal block is required for direct connection of the protective conductor in the motor cable without intermediate terminals. It is plugged together with the terminal module for motor starters or frequency converters before the latter is mounted on the standard mounting rail. With two PE terminals and one N terminal the "-F" version is connected to the "-S32" terminal modules for motor starters or frequency converters. The "-S" version is combined with the "-S31" terminal module. The "F" terminal modules are delivered with two caps for closing the PE/N bus contacts on the final terminal module of a segment. The modules for the Standard motor starters have a width of 45 mm and the modules for the High Feature motor starters and frequency converters have a width of 65 mm.

There is no electrical connection between the terminals of the PE/N terminal block and the integrated shielding of the frequency converter. The PE/N terminal block must therefore not be used for the shielding of the motor cable.

Accessories for Safety Modules local

The Failsafe Kit (F-Kit) is required for Standard motor starter in a safety segment in order.