3RK1301-0AB13-0AA4

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

ET 200S Failsafe Motor Starters ET 200S F-DS1e-x direct-on-line starters

The Failsafe motor starter has been developed on the basis of the High Feature motor starter (.-.AA4 starter). It differs in that, in addition to a motor starter protector and contactor assembly, a safe solid-state evaluation circuit is installed for error detection purposes which makes the motor starter failsafe.

If the contactor to be switched fails in an EMERGENCY-STOP case, the evaluation electronics detects a fault and opens the motor starter protector in the motor starter through a shunt release in a failsafe manner. The second redundant shutdown component is therefore no longer a main contactor, as is generally the case, but the motor starter protector installed in the motor.

All functions of the High Feature starter are already integrated

The new failsafe motor starters are characterized by easy, space-saving assembly as well as minimal wiring outlay. Like the High Feature starters, the Failsafe motor starters have a switching capacity of up to 7.5В kW (16В A) which is achieved with just two motor starter versions. Another important feature is the high availability due to the high short-circuit strength (type of coordination "2").

Use

Failsafe motor starters are predestined for use in combination with PROFIsafe (see "Safety modules local and PROFIsafe" --> Connection diagram "ET 200S Safety Motor Starter Solution PROFIsafe with Failsafe motor starters"). Another field of application is in combination with ASIsafe or safety relays (see “Safety modules local and PROFIsafe” -> “Example 2”).

High degree of flexibility with safety technology

PROFIsafe solution with PM-D F PROFIsafe

In EMERGENCY-STOP applications, the Failsafe motor starters are selectively switched off through the upstream PM-D F PROFIsafe safety module. For each safety module, six switch-off groups can be formed. In the first delivery stage, the failsafe freely-programmable logic of the SIMATIC controller is used to interface with the relevant Failsafe sensor technology. The interface between PROFIsafe and installations that use conventional safety technologies is implemented through the F-CM Failsafe contact multiplier with four floating contacts.

Solution local with PM-D FX1

Failsafe motor starters with safety relay (version 1) or ASIsafe (version 2, see “Safety modules local and PROFIsafe” -> “Example 2”).

Signals with relevance for safety can be input to ET 200S through a PM-D F X1 infeed terminal module through the enabling circuits of the AS-i Safety Monitor or the safety relay to control the Failsafe motor starters which then selectively switch off the downstream motors.