3RK1207-3BQ44-0AA3

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

AS‑Interface analog modules from the K60 compact series detect or issue analog signals locally. These modules are linked to the higher-level controller through an AS‑Interface master according to Specification V2.1 or Specification V3.0.

The analog modules are divided into the following groups:

• Input modules for
  • Sensors with current sensor
  • Sensors with voltage signal
  • Sensors with thermal resistor
• Output modules for
  • Current actuators
  • Voltage actuators

The input modules according to profile 7.3/7.4 are available with two or four input channels. It is possible in addition to convert the two-channel module to using only one input channel, thus enabling very short times before the analog value is available. The conversion is effected by means of a jumper plug at socket 3. The transmission times achieved with analog modules according to Profile 7.A.9 are shorter by half than those achieved with Profile 7.3/7.4. Operation is adjustable in this case, e.g. it is possible to choose with the ID1 code whether the module is operated with one or two channels.

The output modules are configured as two-channel modules as standard.

The input and output channels are electrically separated from the AS‑Interface network. If sensors with a higher power requirement are to be connected, more power can be supplied through the auxiliary voltage as an alternative to the internal supply.

In the manual "AS‑Interface Analog Modules Profile 7.3, Profile 7.A.9", the modules are presented in great detail along with their technical specifications and in-depth notes on operation. Sample function blocks round off the manual, see https://support.industry.siemens.com/cs/ww/en/view/7643815.