The Basic Line Module receives its control information via DRIVE-CLiQ from:

• CU320?2 Control Unit
• SINUMERIK 840D sl with
  • NCU 710.3B PN
  • NCU 720.3B PN
  • NCU 730.3B PN
  • Numeric Control Extensions NX10.3/NX15.3
• SIMOTION D

Connection example of 20 kW and 40 kW Basic Line Modules in booksize format

Note:

The thermostatic switch built into the braking resistor must be looped into the shutdown chain of the drive to prevent thermal overloading of the system in the event of a fault. If a braking resistor is not connected, a jumper must be connected between X21.1 and X21.2.

Connection example of 100 kW Basic Line Module in booksize format