SCALANCE XM416-4C with PE400-8SFP port extender

The modular SCALANCE XM?400 Industrial Ethernet switches consist of various basic devices (8 or 16 ports) which can be expanded by port extenders and plug-in transceivers up to 24 ports (10/100/1000 Mbit/s). Depending on the configuration, they support both electrical and optical transmission media. The rugged, industry-compatible enclosure with IP20 protection is suitable for mounting on rails.

XM-400 basic devices

• XM416?4C with a total of 16 ports, of which
  • 12 ? 10/100/1000 Mbit/s RJ45 ports with retaining collar
  • 4 combo ports (4 ? 10/100/1000 Mbit/s RJ45 ports with retaining collar and 4 SFP slots 100 or 1000 Mbit/s for alternative use)
  • 1 port extender with 8 ports can be connected
• XM408-8C with a total of 8 ports, of which
  • 8 combo ports (8 ? 10/100/1000 Mbit/s RJ45 ports with retaining collar and 8 SFP slots 100 or 1000 Mbit/s for alternative use)
  • 2 port extenders with 8 ports each can be connected
• XM408?4C with a total of 8 ports, of which
  • 4 ? 10/100/1000 Mbit/s RJ45 ports with retaining collar
  • 4 combo ports (4 ? 10/100/1000 Mbit/s RJ45 ports with retaining collar and 4 slots for ST plug-in transceiver 100 Mbit/s or SC plug-in transceiver 1000 Mbit/s for alternative use)
  • 2 port extenders with 8 ports each can be connected

All SCALANCE XM?400 basic devices are additionally equipped with:

• Console port (serial interface RJ11) and management port (100 Mbit/s, RJ45) for on-site parameterization/diagnostics and firmware update
• Slot for C?PLUG swap medium for simple device exchange (included in scope of delivery) or KEY?PLUG XM?400 (optional) for additional activation of Layer 3 functions
• Freely-configurable, floating signal outputs
• LEDs and selector for display of mode and status information
• Grounding bolts for defined ground connection
• Two power supplies for protection against power failure
• Connection for a port extender on the right (tool-free installation)

XM?400 port extender

• PE408 with 8 ? 10/100/1000 Mbit/s RJ45 ports with retaining collar
• PE400-8SFP with 8 SFP slots 100 or 1000 Mbit/s
• PE408PoE with 8 ? 10/100/1000 Mbit/s RJ45 ports, Power over Ethernet (PoE) according to IEEE 802.3at Type 2, and retaining collar; separate power supply required

SFP plug-in transceiver

The following SFP (Small Form-Factor Pluggable) transceivers can be used in the SFP slots:

• Optical SFP plug-in transceivers with 1 ? 100 Mbit/s LC port
  • SFP991-1, multi-mode, glass, up to 5 km
  • SFP991-1LD, single-mode, glass, up to 26 km
  • SFP991-1LH+, single-mode, glass, up to 70 km
  • SFP991-1ELH200, single-mode, glass, up to 200 km
• Optical SFP plug-in transceivers with 1 ? 1 Gbit/s LC port
  • SFP992-1, multi-mode, glass, up to 750 m
  • SFP992-1LD, single-mode, glass, up to 10 km
  • SFP992-1LH, single-mode, glass, up to 40 km
  • SFP992-1LH+, single-mode, glass, up to 70 km
  • SFP992-1ELH, single-mode, glass, up to 120 km

Plug-in transceiver for XM408?4C basic device

• ST plug-in transceiver, ST/BFOC connection, 100 Mbit/s
  • STP991-1, multi-mode FOC, up to 5 km
  • STP991-1LD, single-mode FOC, up to 26 km
• SC plug-in transceiver, SC connection, 1 Gbit/s
  • STP992-1, multi-mode FOC, up to 750 m
  • STP992-1LD, single-mode FOC, up to 10 km

Boundary conditions for network configuration with SCALANCE XM?400

• Maximum line length between 2 modules for multimode fiber-optic conductors:
  • 5 000 m at 100 Mbit/s
  • 750 m at 1 Gbit/s
• Maximum line length between 2 modules for single-mode fiber-optic conductors:
  • 200 km at 100 Mbit/s
  • 120 km at 1 Gbit/s
• Maximum length of installation cable:
  • 100 m at 100 Mbit/s with IE FC TP Cable 2 ? 2 and IE FC Plug 180
  • Max. 90 m at 1 Gbit/s with IE FC TP cable 4 ? 2, IE FC RJ45 modular outlet and patch cable (10 m)
  • 100 m at 1 Gbit/s with IE FC TP Cable 4 ? 2 and IE FC Plug 4 ? 2