IO-Link master module for SIMATIC ET 200S
The electronic module 4SI IO-Link is an IO-Link master and permits the easy integration of sensors and actuators from different manufacturers into the multifunctional, distributed I/O system SIMATIC ET 200S at a total of four ports.
Characteristics
- Up to 4 IO-Link devices (3-wire connection) can be connected to each IO-Link master module.
- Up to 4 standard actuators or encoders (2-wire/3-wire connection) can be connected.
- The electronic module 4SI IO-Link is 15 mm wide and can be used with the following universal terminal modules:
- TM-E15S26-A1 (screw terminal)
- TM-E15C26-A1 (spring-loaded terminal)
- TM-E15N26-A1 (Fast Connect)
- Supports firmware update (as of STEP 7 V5.4 SP4)
Приводная техника