Type of motor |
AC servomotor |
|---|---|
Magnet material |
Rare-earth magnet material |
Insulation of the stator winding in accordance with EN 60034?1 (IEC 60034?1) |
Thermal Class 180 H for a winding temperature rise of ?T = 100 K at an ambient temperature of 40 °C (104 °F) |
Cooling |
Natural cooling |
Temperature monitoring |
3 PTC thermistors + KTY 84 temperature sensor |
Type of construction in accordance with EN 60034?7 (IEC 60034?7) |
|
|
IM B5 |
|
IM B35 |
Schutzart nach EN 60034?5 (IEC 60034?5) |
IP64 |
Shaft extensionon the drive end in accordance with DIN 748?3 (IEC 60072?1) |
Plain shaft |
Shaft and flange accuracy in accordance with DIN 42955 (IEC 60072?1)1) |
Tolerance N (normal) |
Vibration magnitude in accordance with EN 60034?14 (IEC 60034?14) |
Grade N (normal) |
Bearings |
Permanently lubricated deep-groove ball bearings |
Built-in encoder systems |
|
Connection |
2 terminal boxes |
Paint finish |
Anthracite RAL 7016 |
Options |
|
S/R = signals/revolution
1) Shaft extension run-out, concentricity of centering ring and shaft, and perpendicularity of flange to shaft.
2) If the absolute encoder is used,Mrated is reduced by 10 %.
Notice
A PTC thermistor triggering device, such as SIMIREL 3RN10 thermistor motor protection, is mandatory for operating these machines in potentially explosive environments. The connection cables must be able to withstand temperatures of at least +100 °C (+212 °F).
The motors can be connected to SINAMICS S120 drive system only by way of a terminal box. It is not permissible to use connector plugs in Zone 1 areas. Encoders must be connected by means of an SMC20 Sensor Module Cabinet-Mounted.
Click this symbol above for further information.
Приводная техника