Motor Modules . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Motor Modules

| | | | | |

General technical specifications

Electrical specifications
Efficiency	98.5 %
DC link voltage (up to 2000 m (6562 ft) above sea level)	510 ... 720 V DC (line voltage 380 ... 480 V 3 AC) or 675 ... 1035 V DC (line voltage 500 ... 690 V 3 AC)
Output frequency ¹⁾
Control type Servo	0 ... 550 Hz
Control type Vector	0 ... 550 Hz
Control mode V/f	0 ... 550 Hz
Safety Integrated	Safety Integrity Level 2 (SIL2) acc. to IEC 61508, Performance Level d (PLd) acc. to EN ISO 13849вЂ‘1 and Control Category 3 acc. to EN ISO 13849вЂ‘1.

¹⁾ Please note:

вЂў The correlation between the maximum output frequency, pulse frequency and current derating. Higher output frequencies on request. For further information, see https://support.industry.siemens.com/cs/document/104020669

вЂў The correlation between the minimum output frequency and permissible output current (current derating). Information is provided in the SINAMICS Low Voltage Engineering Manual.

Line voltage 380 ... 480 V 3 AC DC link voltage 510 ... 720 V DC		Motor Modules
		6SL3325-1TE32-1AA3	6SL3325-1TE32-6AA3	6SL3325-1TE33-1AA3	6SL3325-1TE35-0AA3
Type rating
At I_L (50 Hz 400 V) ¹⁾	kW	110	132	160	250
At I_H (50 Hz 400 V) ¹⁾	kW	90	110	132	200
At I_L (60 Hz 460 V) ²⁾	hp	150	200	250	400
At I_H (60 Hz 460 V) ²⁾	hp	150	200	200	350
Output current
Rated current I_rated O	A	210	260	310	490
Base-load current I_L³⁾	A	205	250	302	477
Base-load current I_H⁴⁾	A	178	233	277	438
Maximum current I_max O	A	307	375	453	715
DC link current
Rated current I_rated DC when supplied via
Basic Line Module	A	256	317	380	600
Active Line Module	A	230	287	340	538
Base-load current I_L DC ³⁾ when supplied via
Basic Line Module	A	250	305	368	581
Active Line Module	A	225	274	331	522
Base-load current I_H DC⁴⁾ when supplied via
Basic Line Module	A	227	284	338	534
Active Line Module	A	195	255	303	480
Current demand
24 V DC auxiliary power supply	A	1.4	1.4	1.5	1.5
DC link capacitance	ОјF	4800	5800	8400	9600
Pulse frequency ⁵⁾
Rated frequency	kHz	2	2	2	2
Pulse frequency, max.
Without current derating	kHz	2	2	2	2
With current derating	kHz	8	8	8	8
Power loss, max. ⁶⁾
At 50 Hz 400 V	kW	1.61	1.95	2.29	3.56
At 60 Hz 460 V	kW	1.68	2.06	2.38	3.74
Dissipated to ambient air	kW	0.06	0.07	0.09	0.14
Coolant volume flow ⁷⁾	l/min (US gal./min)	9 (2.38)	9 (2.38)	12 (3.17)	12 (3.17)
Liquid volume of the integrated heat exchanger	dm³	0.31	0.31	0.91	0.91
Pressure drop, typ. ⁸⁾ for volume flow	Pa	70000	70000	70000	70000
Heat exchanger material		Stainless steel	Stainless steel	Stainless steel	Stainless steel
Coolant connections Intake/return		Pipe thread ISO 228 G 3/4 B (external thread 3/4", flat-sealing)
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	52	52	52	52
DC link connection DCP, DCN		2 Г— hole for M12 Busbar	2 Г— hole for M12 Busbar	2 Г— hole for M12 Busbar	2 Г— hole for M12 Busbar
Motor connection U2, V2, W2		Hole for M12	Hole for M12	Hole for M12	Hole for M12
Conductor cross-section, max. (IEC)	mm²	2 Г— 95	2 Г— 95	2 Г— 240	2 Г— 240
PE/GND connection		2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12
Conductor cross-section, max. (IEC)	mm²	2 Г— 95	2 Г— 95	2 Г— 240	2 Г— 240
Cable length, max ⁹⁾
Shielded	m (ft)	300 (984)	300 (984)	300 (984)	300 (984)
Unshielded	m (ft)	450 (1476)	450 (1476)	450 (1476)	450 (1476)
Dimensions
Width	mm (in)	150 (5.91)	150 (5.91)	150 (5.91)	150 (5.91)
Height	mm (in)	746 (29.4)	746 (29.4)	1172 (46.1)	1172 (46.1)
Depth	mm (in)	545 (21.5)	545 (21.5)	545 (21.5)	545 (21.5)
Weight, approx.	kg (lb)	41 (90.4)	41 (90.4)	80 (176)	80 (176)
Frame size		FXL	FXL	GXL	GXL

¹⁾ Rated output of a typical 6вЂ‘pole standard induction motor based on I_L or I_H for 400 V 3 AC 50 Hz.

²⁾ Rated output of a typical 6вЂ‘pole standard induction motor based on I_L or I_H for 460 V 3 AC 60 Hz.

³⁾ The base-load current I_L is based on a duty cycle of 110 % for 60 s or 150 % for 10 s with a duty cycle duration of 300 s.

⁴⁾ The base-load current I_H is based on a duty cycle of 150 % for 60 s or 160 % for 10 s with a duty cycle duration of 300 s.

⁵⁾Additional notes regarding the correlation between the pulse frequency and maximum output current/output frequency is provided in the SINAMICS Low Voltage Engineering Manual.

⁶⁾ The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions. To ensure safe dissipation of the minor power loss released to the ambient air, it is important to follow the instructions pertaining to control cabinet installation in the SINAMICS Low Voltage Engineering Manual.

⁷⁾ The value applies to coolants comprising water and a mixture of water and antifreeze agent.

⁸⁾ The value is valid for water as coolant. Additional information and notes on other coolants are provided in the SINAMICS Low Voltage Engineering Manual.

⁹⁾ Total of all motor cables. Longer cable lengths for specific configurations are available on request. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual.

Line voltage 380 ... 480 V 3 AC DC link voltage 510 ... 720 V DC		Motor Modules
		6SL3325-1TE37-5AA7	6SL3325-1TE41-0AA7	6SL3325-1TE41-2AA7	6SL3325-1TE41-4AA7
Type rating
At I_L (50 Hz 400 V) ¹⁾	kW	400	560	710	800
At I_H (50 Hz 400 V) ¹⁾	kW	315	450	630	710
At I_L (60 Hz 460 V) ²⁾	hp	600	800	1000	1150
At I_H (60 Hz 460 V) ²⁾	hp	450	700	900	1000
Output current
Rated current I_rated O	A	745	985	1260	1405
Base-load current I_L³⁾	A	725	960	1230	1370
Base-load current I_H⁴⁾	A	570	860	1127	1257
Maximum current I_max O	A	1087	1440	1845	2055
DC link current
Rated current I_rated DC when supplied via
Basic Line Module	A	894	1202	1512	1714
Active Line Module	A	805	1080	1361	1544
Base-load current I_L DC ³⁾ when supplied via
Basic Line Module	A	871	1170	1474	1670
Active Line Module	A	784	1051	1326	1500
Base-load current I_H DC⁴⁾ when supplied via
Basic Line Module	A	795	1048	1345	1532
Active Line Module	A	716	942	1211	1377
Current demand
24 V DC auxiliary power supply	A	1.6	1.46	1.46	1.46
DC link capacitance	ОјF	17400	21000	29000	29000
Pulse frequency ⁵⁾
Rated frequency	kHz	1.25	1.25	1.25	1.25
Pulse frequency, max.
Without current derating	kHz	1.25	1.25	1.25	1.25
With current derating	kHz	7.5	7.5	7.5	7.5
Power loss, max. ⁶⁾
At 50 Hz 400 V	kW	5.1	7.9	9.15	10.2
At 60 Hz 460 V	kW	5.61	8.55	10.05	11.2
Dissipated to ambient air	kW	0.2	0.44	0.56	0.62
Coolant volume flow ⁷⁾	l/min (US gal./min)	16 (4.23)	27 (7.13)	27 (7.13)	27 (7.13)
Liquid volume of the integrated heat exchanger	dm³	0.74	1.56	1.56	1.56
Pressure drop, typ. ⁸⁾ for volume flow	Pa	70000	70000	70000	70000
Heat exchanger material		Copper-nickel alloy	Copper-nickel alloy	Copper-nickel alloy	Copper-nickel alloy
Coolant connections Intake/return		Pipe thread ISO 228 G 3/4 B (external thread 3/4", flat-sealing)
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	54	56	56	56
DC link connection DCP, DCN		2 Г— hole for M12 Busbar	2 Г— hole for M12 Busbar	2 Г— hole for M12 Busbar	2 Г— hole for M12 Busbar
Motor connection U2, V2, W2		2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12
Conductor cross-section, max. (IEC)	mm²	4 Г— 185	4 Г— 240	4 Г— 240	4 Г— 240
PE/GND connection		2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12
Conductor cross-section, max. (IEC)	mm²	4 Г— 185	Busbar	Busbar	Busbar
Cable length, max ⁹⁾
Shielded	m (ft)	300 (984)	300 (984)	300 (984)	300 (984)
Unshielded	m (ft)	450 (1476)	450 (1476)	450 (1476)	450 (1476)
Dimensions
Width	mm (in)	265 (10.4)	295 (11.6)	295 (11.6)	295 (11.6)
Height	mm (in)	987 (38.9)	1510 (59.4)	1510 (59.4)	1510 (59.4)
Depth	mm (in)	545 (21.5)	545 (21.5)	545 (21.5)	545 (21.5)
Weight, approx.	kg (lb)	125 (276)	230 (507)	230 (507)	230 (507)
Frame size		HXL	JXL	JXL	JXL

¹⁾ Rated output of a typical 6вЂ‘pole standard induction motor based on I_L or I_H for 400 V 3 AC 50 Hz.

²⁾ Rated output of a typical 6вЂ‘pole standard induction motor based on I_L or I_H for 460 V 3 AC 60 Hz.

³⁾ The base-load current I_L is based on a duty cycle of 110 % for 60 s or 150 % for 10 s with a duty cycle duration of 300 s.

⁴⁾ The base-load current I_H is based on a duty cycle of 150 % for 60 s or 160 % for 10 s with a duty cycle duration of 300 s.

⁵⁾Additional notes regarding the correlation between the pulse frequency and maximum output current/output frequency is provided in the SINAMICS Low Voltage Engineering Manual.

⁷⁾ The value applies to coolants comprising water and a mixture of water and antifreeze agent.

⁸⁾ The value is valid for water as coolant. Additional information and notes on other coolants are provided in the SINAMICS Low Voltage Engineering Manual.

Line voltage 500 ... 690 V 3 AC DC link voltage 675 ... 1035 V DC		Motor Modules
		6SL3325-1TG31-0AA3	6SL3325-1TG31-5AA3	6SL3325-1TG32-2AA3	6SL3325-1TG33-3AA3
Type rating
At I_L (50 Hz 690 V) ¹⁾	kW	90	132	200	315
At I_H (50 Hz 690 V) ¹⁾	kW	75	110	160	250
At I_L (50 Hz 500 V) ¹⁾	kW	55	90	132	200
At I_H (50 Hz 500 V) ¹⁾	kW	55	90	132	200
At I_L (60 Hz 575 V) ²⁾	hp	75	150	200	300
At I_H (60 Hz 575 V) ²⁾	hp	75	125	200	250
Output current
Rated current I_rated O	A	100	150	215	330
Base-load current I_L³⁾	A	95	142	208	320
Base-load current I_H⁴⁾	A	89	134	192	280
Maximum current I_max O	A	142	213	312	480
DC link current
Rated current I_rated DC when supplied via
Basic Line Module	A	122	183	263	403
Active Line Module	A	110	165	237	363
Base-load current I_L DC ³⁾ when supplied via
Basic Line Module	A	116	173	253	390
Active Line Module	A	105	156	229	352
Base-load current I_H DC⁴⁾ when supplied via
Basic Line Module	A	108	163	234	341
Active Line Module	A	98	147	211	308
Current demand
24 V DC auxiliary power supply	A	1.0	1.0	1.5	1.5
DC link capacitance	ОјF	2800	2800	4200	5800
Pulse frequency ⁵⁾
Rated frequency	kHz	1.25	1.25	1.25	1.25
Pulse frequency, max.
Without current derating	kHz	1.25	1.25	1.25	1.25
With current derating	kHz	7.5	7.5	7.5	7.5
Power loss, max. ⁶⁾
At 50 Hz 690 V	kW	1.15	1.64	2.34	3.38
At 60 Hz 575 V	kW	1.02	1.45	2.05	2.96
Dissipated to ambient air	kW	0.06	0.07	0.09	0.12
Coolant volume flow ⁷⁾	l/min (US gal./min)	9 (2.38)	9 (2.38)	12 (3.17)	12 (3.17)
Liquid volume of the integrated heat exchanger	dm³	0.31	0.31	0.91	0.91
Pressure drop, typ. ⁸⁾ for volume flow	Pa	70000	70000	70000	70000
Heat exchanger material		Stainless steel	Stainless steel	Stainless steel	Stainless steel
Coolant connections Intake/return		Pipe thread ISO 228 G 3/4 B (external thread 3/4", flat-sealing)
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	52	52	52	52
DC link connection DCP, DCN		2 Г— hole for M12 Busbar	2 Г— hole for M12 Busbar	2 Г— hole for M12 Busbar	2 Г— hole for M12 Busbar
Motor connection U2, V2, W2		Hole for M12	Hole for M12	Hole for M12	Hole for M12
Conductor cross-section, max. (IEC)	mm²	2 Г— 95	2 Г— 95	4 Г— 240	4 Г— 240
PE/GND connection		2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12
Conductor cross-section, max. (IEC)	mm²	2 Г— 95	2 Г— 95	2 Г— 240	2 Г— 240
Cable length, max ⁹⁾
Shielded	m (ft)	300 (984)	300 (984)	300 (984)	300 (984)
Unshielded	m (ft)	450 (1476)	450 (1476)	450 (1476)	450 (1476)
Dimensions
Width	mm (in)	150 (5.91)	150 (5.91)	150 (5.91)	150 (5.91)
Height	mm (in)	728 (28.7)	728 (28.7)	1172 (46.1)	1172 (46.1)
Depth	mm (in)	545 (21.5)	545 (21.5)	545 (21.5)	545 (21.5)
Weight, approx.	kg (lb)	41 (90.4)	41 (90.4)	80 (176)	80 (176)
Frame size		FXL	FXL	GXL	GXL

¹⁾ Rated output of a typical 6вЂ‘pole standard induction motor based on I_L or I_H for 500 V or 690 V 3 AC 50 Hz.

²⁾ Rated output of a typical 6вЂ‘pole standard induction motor based on I_L or I_H for 575 V 3 AC 60 Hz.

³⁾ The base-load current I_L is based on a duty cycle of 110 % for 60 s or 150 % for 10 s with a duty cycle duration of 300 s.

⁴⁾ The base-load current I_H is based on a duty cycle of 150 % for 60 s or 160 % for 10 s with a duty cycle duration of 300 s.

⁵⁾Additional notes regarding the correlation between the pulse frequency and maximum output current/output frequency is provided in the SINAMICS Low Voltage Engineering Manual.

⁷⁾ The value applies to coolants comprising water and a mixture of water and antifreeze agent.

⁸⁾ The value is valid for water as coolant. Additional information and notes on other coolants are provided in the SINAMICS Low Voltage Engineering Manual.

Line voltage 500 ... 690 V 3 AC DC link voltage 675 ... 1035 V DC		Motor Modules
		6SL3325-1TG34-7AA7	6SL3325-1TG35-8AA7
Type rating
At I_L (50 Hz 690 V) ¹⁾	kW	450	560
At I_H (50 Hz 690 V) ¹⁾	kW	400	450
At I_L (50 Hz 500 V) ¹⁾	kW	315	400
At I_H (50 Hz 500 V) ¹⁾	kW	250	315
At I_L (60 Hz 575 V) ²⁾	hp	450	600
At I_H (60 Hz 575 V) ²⁾	hp	450	500
Output current
Rated current I_rated O	A	465	575
Base-load current I_L³⁾	A	452	560
Base-load current I_H⁴⁾	A	416	514
Maximum current I_max O	A	678	840
DC link current
Rated current I_rated DC when supplied via
Basic Line Module	A	558	702
Active Line Module	A	502	632
Base-load current I_L DC ³⁾ when supplied via
Basic Line Module	A	544	683
Active Line Module	A	489	616
Base-load current I_H DC⁴⁾ when supplied via
Basic Line Module	A	496	627
Active Line Module	A	446	565
Current demand
24 V DC auxiliary power supply	A	1.6	1.6
DC link capacitance	ОјF	9670	9670
Pulse frequency ⁵⁾
Rated frequency	kHz	1.25	1.25
Pulse frequency, max.
Without current derating	kHz	1.25	1.25
With current derating	kHz	7.5	7.5
Power loss, max. ⁶⁾
At 50 Hz 690 V	kW	5.44	5.61
At 60 Hz 575 V	kW	5.1	5.45
Dissipated to ambient air	kW	0.14	0.16
Coolant volume flow ⁷⁾	l/min (US gal./min)	16 (4.23)	16 (4.23)
Liquid volume of the integrated heat exchanger	dm³	0.74	0.74
Pressure drop, typ. ⁸⁾ for volume flow	Pa	70000	70000
Heat exchanger material		Copper-nickel alloy	Copper-nickel alloy
Coolant connections Intake/return		Pipe thread ISO 228 G 3/4 B (external thread 3/4", flat-sealing)
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	54	54
DC link connection DCP, DCN		2 Г— hole for M12 Busbar	2 Г— hole for M12 Busbar
Motor connection U2, V2, W2		2 Г— hole for M12	2 Г— hole for M12
Conductor cross-section, max. (IEC)	mm²	4 Г— 185	4 Г— 185
PE/GND connection		2 Г— hole for M12	2 Г— hole for M12
Conductor cross-section, max. (IEC)	mm²	4 Г— 185	4 Г— 185
Cable length, max ⁹⁾
Shielded	m (ft)	300 (984)	300 (984)
Unshielded	m (ft)	450 (1476)	450 (1476)
Dimensions
Width	mm (in)	265 (10.4)	265 (10.4)
Height	mm (in)	987 (38.9)	987 (38.9)
Depth	mm (in)	545 (21.5)	545 (21.5)
Weight, approx.	kg (lb)	125 (276)	125 (276)
Frame size		HXL	HXL

¹⁾ Rated output of a typical 6вЂ‘pole standard induction motor based on I_L or I_H for 500 V or 690 V 3 AC 50 Hz.

²⁾ Rated output of a typical 6вЂ‘pole standard induction motor based on I_L or I_H for 575 V 3 AC 60 Hz.

³⁾ The base-load current I_L is based on a duty cycle of 110 % for 60 s or 150 % for 10 s with a duty cycle duration of 300 s.

⁴⁾ The base-load current I_H is based on a duty cycle of 150 % for 60 s or 160 % for 10 s with a duty cycle duration of 300 s.

⁵⁾Additional notes regarding the correlation between the pulse frequency and maximum output current/output frequency is provided in the SINAMICS Low Voltage Engineering Manual.

⁷⁾ The value applies to coolants comprising water and a mixture of water and antifreeze agent.

⁸⁾ The value is valid for water as coolant. Additional information and notes on other coolants are provided in the SINAMICS Low Voltage Engineering Manual.

Line voltage 500 ... 690 V 3 AC DC link voltage 675 ... 1035 V DC		Motor Modules
		6SL3325-1TG38-1AA7	6SL3325-1TG41-0AA7	6SL3325-1TG41-3AA7 ¹⁾	6SL3325-1TG41-6AA7 ¹⁾
Type rating
At I_L (50 Hz 690 V) ²⁾	kW	800	1000	1200	1500
At I_H (50 Hz 690 V) ²⁾	kW	710	900	1000	1260
At I_L (50 Hz 500 V) ²⁾	kW	560	710	900	1000
At I_H (50 Hz 500 V) ²⁾	kW	560	630	800	900
At I_L (60 Hz 575 V) ³⁾	hp	800	1000	1250	1500
At I_H (60 Hz 575 V) ³⁾	hp	700	900	1000	1250
Output current
Rated current I_rated O	A	810	1025	1270	1560
Base-load current I_L⁴⁾	A	790	1000	1230	1500
Base-load current I_H⁵⁾	A	724	917	1136	1284
Maximum current I_max O	A	1185	1500	1600	1950
DC link current
Rated current I_rated DC when supplied via
Basic Line Module	A	990	1250	1550	1903
Active Line Module	A	891	1125	1395	1714
Base-load current I_L DC ⁴⁾ when supplied via
Basic Line Module	A	963	1219	1500	1800
Active Line Module	A	869	1100	1353	1650
Base-load current I_H DC⁵⁾ when supplied via
Basic Line Module	A	883	1118	1384	1680
Active Line Module	A	796	1009	1250	1550
Current demand
24 V DC auxiliary power supply	A	1.46	1.46	1.46	1.46
DC link capacitance	ОјF	14000	16000	19330	21000
Pulse frequency ⁶⁾
Rated frequency	kHz	1.25	1.25	1.25	1.25
Pulse frequency, max.
Without current derating	kHz	1.25	1.25	1.25	1.25
With current derating	kHz	7.5	7.5	7.5	7.5
Power loss, max. ⁷⁾
At 50 Hz 690 V	kW	9.56	10.87	13.49	17.9
At 60 Hz 575 V	kW	8.34	9.55	11.84	15.7
Dissipated to ambient air	kW	0.43	0.53	0.57	0.78
Coolant volume flow ⁸⁾	l/min (US gal./min)	27 (7.13)	27 (7.13)	27 (7.13)	27 (7.13)
Liquid volume of the integrated heat exchanger	dm³	1.56	1.56	1.56	1.56
Pressure drop, typ. ⁹⁾ for volume flow	Pa	70000	70000	70000	70000
Heat exchanger material		Copper-nickel alloy	Copper-nickel alloy	Copper-nickel alloy	Copper-nickel alloy
Coolant connections Intake/return		Pipe thread ISO 228 G 3/4 B (external thread 3/4", flat-sealing)
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	56	56	56	56
DC link connection DCP, DCN		2 Г— hole for M12 Busbar	2 Г— hole for M12 Busbar	2 Г— hole for M12 Busbar	2 Г— hole for M12 Busbar
Motor connection U2, V2, W2		2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12
Conductor cross-section, max. (IEC)	mm²	Busbar	Busbar	Busbar	Busbar
PE/GND connection		2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12	2 Г— hole for M12
Conductor cross-section, max. (IEC)	mm²	Busbar	Busbar	Busbar	Busbar
Cable length, max. ¹⁰⁾
Shielded	m (ft)	300 (984)	300 (984)	300 (984)	300 (984)
Unshielded	m (ft)	450 (1476)	450 (1476)	450 (1476)	450 (1476)
Dimensions
Width	mm (in)	295 (11.6)	295 (11.6)	295 (11.6)	295 (11.6)
Height	mm (in)	1510 (59.4)	1510 (59.4)	1510 (59.4)	1510 (59.4)
Depth	mm (in)	545 (21.5)	545 (21.5)	545 (21.5)	545 (21.5)
Weight, approx.	kg (lb)	230 (507)	230 (507)	230 (507)	240 (529)
Frame size		JXL	JXL	JXL	JXL

¹⁾The short-time current for 10 s for low overload must be reduced from 150 % to 130 % for this Motor Module. At 10 s and 60 s, the short-time current for high overload must be reduced to 130 % for this Motor Module. The duty cycle remains unchanged.

²⁾ Rated output of a typical 6вЂ‘pole standard induction motor based on I_L or I_H for 500 V or 690 V 3 AC 50 Hz.

³⁾ Rated output of a typical 6вЂ‘pole standard induction motor based on I_L or I_H for 575 V 3 AC 60 Hz.

⁴⁾ The base-load current I_L is based on a duty cycle of 110 % for 60 s or 150 % for 10 s with a duty cycle duration of 300 s.

⁵⁾ The base-load current I_H is based on a duty cycle of 150 % for 60 s or 160 % for 10 s with a duty cycle duration of 300 s.

⁶⁾Additional notes regarding the correlation between the pulse frequency and maximum output current/output frequency are provided in the SINAMICS Low Voltage Engineering Manual.

⁷⁾ The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions. To ensure safe dissipation of the minor power loss released to the ambient air, it is important to follow the instructions pertaining to control cabinet installation in the SINAMICS Low Voltage Engineering Manual.

⁸⁾ The value applies to coolants comprising water and a mixture of water and antifreeze agent.

⁹⁾ The value is valid for water as coolant. Additional information and notes on other coolants are provided in the SINAMICS Low Voltage Engineering Manual.

¹⁰⁾ Sum of all motor cables. Longer cable lengths for specific configurations are available on request. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual.

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания