Rated voltages | 380 ... 480 V 3 AC ±10 % (-15 % <1 min) 500 ... 690 V 3 AC ±10 % (-15 % <1 min) |
Line supply types | Grounded TN/TT systems and non-grounded IT systems |
Line frequency | 47 ... 63 Hz |
Overvoltage category | III to EN 61800‑5‑1 |
Electronics power supply | 24 V DC, -15 % +20 %
implemented as PELV circuit in accordance with EN 61800-5-1
Ground = negative pole grounded via the electronics |
Mechanical specifications |
Degree of protection | IP00 or IP20 depending on type |
Protection class | I acc. to EN 61800‑5‑1 |
Touch protection | EN 50274/DGUV regulation 3 when used as intended |
Ambient conditions | Storage 1) | Transport 1) | Operation |
Ambient temperature | -25 ... +55 °C (-13 ... +131 °F) Class 1K4
acc. to EN 60721‑3‑1 | -25 ... +70 °C (-13 ... +158 °F) Class 2K4
acc. to EN 60721‑3‑2 | Line-side components:
0 … 40 °C (32 ... 104 °F) without derating
Up to 55 °C (131 °F), see derating data Control Units, supplementary system components, and Sensor Modules:
0 ... 55 °C (32 ... 131 °F) (for operation in a control cabinet) DC link components and motor-side components:
0 ... 55 °C (32 ... 131 °F) |
Relative humidity Condensation, splashwater, and ice formation not permitted (EN 60204, Part 1) | 5 ... 95 % Class 1K4
acc. to EN 60721‑3‑1 | 5 ... 95 % at 40 °C (104 °F) Class 2K4
acc. to EN 60721‑3‑2 | 5 ... 95 % Class 3K3
acc. to EN 60721‑3‑3 |
Environmental class/harmful chemical substances | Class 1C2
acc. to EN 60721‑3‑1 | Class 2C2
acc. to EN 60721‑3‑2 | Class 3C2
acc. to EN 60721‑3‑3 |
Organic/biological influences | Class 1B1
acc. to EN 60721‑3‑1 | Class 2B1
acc. to EN 60721‑3‑2 | Class 3B1
acc. to EN 60721‑3‑3 |
Degree of pollution | 2 acc. to IEC/EN 61800‑5‑1 | 2 acc. to IEC/EN 61800‑5‑1 | 2 acc. to IEC/EN 61800‑5‑1 |
Installation altitude | Up to 2000 m (6562 ft) above sea level without derating
>2000 m (6562 ft) above sea level, see derating data |
Mechanical stability | Storage 1) | Transport 1) | Operation |
Vibratory load | – | Class 2M2
acc. to EN 60721‑3‑2 | Test values
acc. to EN 60068‑2‑6 test Fc: - 10 ... 58 Hz with constant deflection 0.075 mm
- 58 ... 150 Hz with constant acceleration 9.81 m/s2 (1 Г— g)
|
Shock load | – | Class 2M2
acc. to EN 60721‑3‑2 | Test values
according to EN 60068‑2‑27 test Ea: 98 m/s2 (10 × g)/20 ms |
Compliance with standards |
Conformances/certificates of suitability, according to | CE (EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC for functional safety)
cURus or cULus (only for devices connected to line supply voltages 380 ... 480 V 3 AC and 500 ... 600 V 3 AC) |
Radio interference suppression | SINAMICS S120 chassis format units are not designed for connection to the public grid (first environment). Radio interference suppression is compliant with the EMC product standard for variable-speed drives EN 61800-3, "Second environment" (industrial line supplies). EMC disturbances can occur when connected to the public grid. However, if additional measures are taken (e.g. в†’ line filter), it can also be operated in the "first environment". For further information, see section Tools and Engineering. |
