Rated voltages

380 ... 480 V 3 AC ±10 % (-15 % <1 min)

500 ... 690 V 3 AC ±10 % (-15 % <1 min)

Line supply types

Grounded TN/TT systems and non-grounded IT systems

Line frequency

47 ... 63 Hz

Overvoltage category

III to EN 61800?5?1

Electronics power supply

24 V DC, -15 % +20 %
implemented as PELV circuit in accordance with EN 61800-5-1
Ground = negative pole grounded via the electronics

Mechanical specifications

Degree of protection

IP00 or IP20 dependent on type

Protection class

I acc. to EN 61800?5?1

Touch protection

EN 50274/DGUV regulation 3 when used as intended

Ambient conditions

Storage ¹⁾

Transport ¹⁾

Operation

Ambient temperature

-25 ... +55 °C (-13 ... +131 °F)

Class 1K4
acc. to EN 60721?3?1

-25 ... +70 °C (-13 ... +158 °F)

Class 2K4
acc. to EN 60721?3?2

Line-side components:
0 … 40 °C (32 ... 104 °F) without derating
Up to 55 °C (131 °F), see derating data

Control Units, supplementary system components, and Sensor Modules:
0 ... 55 °C (32 ... 131 °F) (for operation in a control cabinet)

DC link components and motor-side components:
0 ... 55 °C (32 ... 131 °F)

Relative humidity

Condensation, splashwater, and ice formation not permitted (EN 60204, Part 1)

5 ... 95 %

Class 1K4
acc. to EN 60721?3?1

5 ... 95 % at 40 °C (104 °F)

Class 2K4
acc. to EN 60721?3?2

5 ... 95 %

Class 3K3
acc. to EN 60721?3?3

Environmental class/harmful chemical substances

Class 1C2
acc. to EN 60721?3?1

Class 2C2
acc. to EN 60721?3?2

Class 3C2
acc. to EN 60721?3?3

Organic/biological influences

Class 1B1
acc. to EN 60721?3?1

Class 2B1
acc. to EN 60721?3?2

Class 3B1
acc. to EN 60721?3?3

Degree of pollution

2 acc. to IEC/EN 61800?5?1

2 acc. to IEC/EN 61800?5?1

2 acc. to IEC/EN 61800?5?1

Installation altitude

Up to 2000 m (6562 ft) above sea level without derating
>2000 m (6562 ft) above sea level, see derating data

Mechanical stability

Storage ¹⁾

Transport ¹⁾

Operation

Vibratory load

–

Class 2M2
acc. to EN 60721?3?2

Test values
acc. to EN 60068?2?6 test Fc:

• 10 ... 58 Hz with constant deflection 0.075 mm
• 58 ... 150 Hz with constant acceleration 9.81 m/s² (1 ? g)

Shock load

–

Class 2M2
acc. to EN 60721?3?2

Test values
according to EN 60068?2?27 test Ea: 98 m/s² (10 ? g)/20 ms

Compliance with standards

Certificates of suitability

CE (EMC Directive No. 2014/30/EU, Low Voltage Directive No. 2014/35/EU, Machinery Directive 2006/42/EC for functional safety)
cURus or cULus (only for devices connected to line supply voltages 380 ... 480 V 3 AC and 500 ... 600 V 3 AC)

Electromagnetic compatibility

Built-in units SINAMICS S120 chassis format can be operated in the second environment, Category C3/C2 according to EMC product standard EN 61800?3.

For further information, see section Tools and configuring.