Siemens
ÑÐÅÄÑÒÂÀ ÏÐÎÌÛØËÅÍÍÎÉ ÀÂÒÎÌÀÒÈÇÀÖÈÈ
îôèöèàëüíûé ïàðòíåð Ñèìåíñ
Êàòàëîã ÑÀ01 2018
(4872) 700-366
skenergo@mail.ru
Ïîèñê
Êàòàëîã 2018 | Êàòàëîã 2017 | Êàòàëîã 2016 | Êàòàëîã 2015 | Êàòàëîã 2014 | Êàòàëîã 2013 | Êàòàëîã 2012 | Ñåðòèôèêàò | Êîíòàêòû | Êàðòà ñàéòà | Ïîèñê 
Èíôîðìàöèþ ïî ïðîäóêòó òàêæå äîñòóïíà â àðõèâíûõ êàòàëîãàõ  ÑÀ01 2017  
Design | Integration | Technical specifications | Characteristic curves | Ordering data |

General technical specifications

Unless explicitly specified otherwise, the following technical specifications are valid for all PM240‑2 Power Modules in the blocksize format, FSA to FSF.

Note:

When engineering the complete SINAMICS S120 drive, the system data of the associated Control Units, supplementary system components, DC link components and Sensor Modules must be taken into consideration.

Electrical specifications

Line voltage

 

  • Blocksize format FSA ... FSC

200 to 240 V 1 AC ±10%
200 to 240 V 3 AC ±10%
380 to 480 V 3 AC ±10%

  • Blocksize format FSD to FSF

200 â€¦ 240 V 3 AC ±10 % (in operation -20 % <1 min)
380 ... 480 V 3 AC ±10 % (in operation -20 % <1 min)
500 â€¦ 690 V 3 AC ±10 % (in operation -20 % <1 min)

Line system configurations

Grounded TN/TT systems and non-grounded IT systems

Line frequency

47 ... 63 Hz

Line power factor

for a 3 AC line supply voltage and output power

 

  • Blocksize format FSA ... FSC

 

  • Fundamental power factor (cos Ï†1)

>0.96

  • Total (λ)

> 0.7 - 0.85

  • Blocksize format FSD to FSF

 

  • Fundamental power factor (cos Ï†1)

> 0.98 - 0.99

  • Total (λ)

> 0.9 - 0.92

Electromagnetic compatibility1)

 

  • Interference immunity

All PM240-2 Power Modules are suitable for use in both the first and second environments.

  • Interference emission acc. to EN 61800‑3 
    Second environment

 

  • For devices with integrated radio suppression interference filter

Category C2

  • For devices with integrated radio suppression interference filter, format FSF with a line supply voltage of 690 V

Category C3

  • For devices without integrated radio interference suppression filter with optional external radio interference filter for grounded line supplies

Category C2
(recommended for operation in conjunction with a residual current protective device RCD)

  • For devices without integrated radio interference suppression filter for operation on IT line supplies

Category C4

  • Interference emission acc. to EN 61800‑3 
    First environment

Can be used in the first environment when taking into consideration the additional secondary conditions listed in Section, EMC notes

Overvoltage category

acc. to IEC/EN 61800‑5‑1

III

Electronics power supply

implemented as PELV circuit according to IEC/EN 61800‑5‑1

24 V DC, -15 % +20 %
Ground = negative pole grounded via the electronics

Short-circuit current rating (SCCR)

(Short Circuit Current Rating)
Applies to industrial control cabinet installations according to NEC Article 409 or UL 508A

100 kA
See the recommended line-side components – the value depends on the fuses and circuit breakers used

Rated pulse frequency

 

  • For devices with a rated voltage of 200 V 1/3 AC, 400 V 3 AC and a type rating ≤ 90 kW based on Irated

4 kHz

  • For devices with a rated voltage of 690 V 3 AC and a type rating ≥ 110 kW based on Irated

2 kHz

Output voltage, max.

Approximately 0.95 Ã— line voltage
(at 200 V 1 AC, approximately 0.74 Ã— line voltage)

Output frequency

0 ... 550 Hz
(dependencies on the control mode and pulse frequency must be taken into account)

Mechanical specifications

Type of cooling

Internal air cooling, power units with forced air cooling using integrated fans
External air cooling (push-through cooling) for push-through device versions

Degree of protection

acc. to EN 60529

IP20

Protection class

 

  • Line circuits with protective conductor connection according to IEC/EN 61800‑5‑1

I

  • Electronic circuits

Safety extra low-voltage PELV/SELV

Touch protection

according to EN 50274/DGUV regulation 3 when used as intended

 

  • Internal air cooling

Forced air cooling AF to EN 60146

  • External air cooling

Push-through cooling for push-through device versions

Ambient conditions

 

Storage

Transport

Operation

In the product packaging

In transport packaging

 

Ambient temperature

Class 1K4
acc. to EN 60721‑3‑1
-25 ... +55 °C (-13 ... +131 °F)

Class 2K4
acc. to EN 60721‑3‑2
-40 ... +70 °C (-40 ... +158 °F)

Class 3K3 2)
acc. to EN 60721‑3‑3
For operation without derating3): -10 ... +40 °C (14 ... 104 °F) (for operation with low overload)
-10 ... +50 °C (14 ... 122 °F) (for operation with high overload)
For operation with derating: >40 ... +60 °C (104 ... 140 °F)

Relative humidity

(oil mist, salt mist, ice, condensation, dripping water, spraying water and water jets are not permitted)

Class 1K4
acc. to EN 60721‑3‑1
5 ... 95 %

Class 2K3
acc. to EN 60721‑3‑2
5 ... 95 % at 40 °C

Class 3K3 2)
acc. to EN 60721‑3‑3
5 ... 95 %

Environmental class/harmful chemical substances

Class 1C2
acc. to EN 60721‑3‑1

Class 2C2
acc. to EN 60721‑3‑2

Class 3C2
acc. to EN 60721‑3‑3

Organic/biological influences

Class 1B1
acc. to EN 60721‑3‑1

Class 2B1
acc. to EN 60721‑3‑2

Class 3B1
acc. to EN 60721‑3‑3

Degree of pollution

acc. to IEC/EN 61800‑5‑1 (condensation not permissible)

2

Installation altitude

 

  • For operation with low overload

Up to 1000m (3281 ft) above sea level without derating

  • For operation with high overload

Up to 2000 m (6562 ft) above sea level without derating

  • From 2000 m up to 4000 m (6562 ft to 13124 ft) above sea level observe the derating characteristics

See characteristic for current derating as a function of the installation altitude and/or reduction of the ambient temperature by 3.5 K per 500 m (1640 ft)

Mechanical strength

 

Storage

Transport

Operation

In the product packaging

In transport packaging

 

Vibratory load

Class 1M2
acc. to EN 60721‑3‑1

Class 2M3
acc. to EN 60721‑3‑2

Class 3M1
acc. to EN 60721‑3‑3
Test values acc. to EN 60068‑2‑6

Shock load

Class 1M2
acc. to EN 60721‑3‑1

Class 2M3
acc. to EN 60721‑3‑2

Class 3M1
acc. to EN 60721‑3‑3
Test values acc. to EN 60068‑2‑27

Certificates

Declarations of conformity

CE (Low Voltage, EMC and M​achinery Directives)

Certificates of suitability

 

  • Blocksize format FSA ... FSC

cULus according to UL 61800‑5‑1; CSA only with external surge voltage protection device; RCM; SEMI F47

  • Blocksize format FSD to FSF

cULus acc. to UL 61800‑5‑1; CSA only with external surge voltage protection device; RCM; SEMI F47
KCC only with internal or external line filters, Category C2; RoHS; EAC
WEEE (Waste Electrical & Electronic Equipment)



1) Observe the EMC notes in section Configuration notes.

2) Better than 3K3 through increased ruggedness regarding the temperature range and humidity.

3) Also carefully observe the permissible temperatures for the Control Unit and where relevant, the operator panel (IOP or BOP‑2)

PM240‑2 Power Modules standard variant

Line voltage 200 ... 240 V 1 AC/3 AC

PM240‑2 Power Modules standard variant

Without integrated line filter

6SL3210-1PB13-0UL0

6SL3210-1PB13-8UL0

6SL3210-1PB15-5UL0

6SL3210-1PB17-4UL0

6SL3210-1PB21-0UL0

With integrated line filter class A

6SL3210-1PB13-0AL0

6SL3210-1PB13-8AL0

6SL3210-1PB15-5AL0

6SL3210-1PB17-4AL0

6SL3210-1PB21-0AL0

Output current

at 50 Hz 230 V 1 AC

 

 

 

 

 

 

  • Rated current Irated 1)

A

3

3.9

5.5

7.4

10.4

  • For S6 duty (40 %) IS6

A

3.3

4.3

6.1

8.2

11.5

  • Base-load current IH2)

A

2.3

3

3.9

5.5

7.4

  • Maximum current Imax

A

4.6

6

8.3

11.1

15.6

Type rating

 

 

 

 

 

 

  • Based on Irated

kW (hp)

0.55 (0.75)

0.75 (1)

1.1 (1.5)

1.5 (2)

2.2 (3)

  • Based on IH

kW (hp)

0.37 (0.5)

0.55 (0.75)

0.75 (1)

1.1 (1.5)

1.5 (2)

Rated pulse frequency

kHz

4

4

4

4

4

Efficiency η

%

>96

>96

>96

>96

>96

Power loss 3)

at rated current

kW

0.04

0.04

0.05

0.07

0.12

Cooling air requirement

m3/s (ft3/s)

0.005 (0.18)

0.005 (0.18)

0.0092 (0.325)

0.0092 (0.325)

0.0092 (0.325)

Sound pressure level

LpA (1 m)

dB

<50

<50

<62

<62

<62

24 V DC power supply

for Control Unit

A

1

1

1

1

1

Input current 4)

 

 

 

 

 

 

  • Rated current 1 AC/3 AC

A

7.5/4.3

9.6/5.5

13.5/7.8

18.1/10.5

24/13.9

  • Based on IH 1 AC/3 AC

A

6.6/3.8

8.4/4.8

11.8/6.8

15.8/9.1

20.9/12.1

Line supply connection

U1/L1, V1/L2, W1/L3

 

Terminal connector

Terminal connector

Terminal connector

Terminal connector

Terminal connector

  • Conductor cross-section

mm2

1.5 ... 2.5

1.5 ... 2.5

1.5 ... 6

1.5 ... 6

1.5 ... 6

Motor connection

U2, V2, W2

 

Terminal connector

Terminal connector

Terminal connector

Terminal connector

Terminal connector

  • Conductor cross-section

mm2

1.5 ... 2.5

1.5 ... 2.5

1.5 ... 6

1.5 ... 6

1.5 ... 6

PE connection

 

Included in terminal connector

Included in terminal connector

Included in terminal connector

Included in terminal connector

Included in terminal connector

Motor cable length, max.

 

 

 

 

 

 

  • Shielded

m (ft)

50 (164)

50 (164)

50 (164)

50 (164)

50 (164)

  • Unshielded

m (ft)

100 (328)

100 (328)

100 (328)

100 (328)

100 (328)

Degree of protection

 

IP20

IP20

IP20

IP20

IP20

Dimensions

 

 

 

 

 

 

  • Width

mm (in)

73 (2.87)

73 (2.87)

100 (3.94)

100 (3.94)

100 (3.94)

  • Height

mm (in)

196 (7.72)

196 (7.72)

291 (11.46)

291 (11.46)

291 (11.46)

  • Depth without operator panel

mm (in)

165 (6.50)

165 (6.50)

165 (6.50)

165 (6.50)

165 (6.50)

Frame size

 

FSA

FSA

FSB

FSB

FSB

Weight, approx.

 

 

 

 

 

 

  • Without integrated line filter

kg (lb)

1.4 (3.09)

1.4 (3.09)

2.9 (6.39)

2.9 (6.39)

2.9 (6.39)

  • With integrated line filter

kg (lb)

1.6 (3.53)

1.6 (3.53)

3.1 (6.84)

3.1 (6.84)

3.1 (6.84)



1) The rated output current Irated is based on the duty cycle for low overload (LO).

2) The base-load current IH is based on the duty cycle for high overload (HO).

3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

4) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

 

Line voltage 200 ... 240 V 1 AC/3 AC

PM240‑2 Power Modules standard variant

Without integrated line filter

6SL3210-1PB21-4UL0

6SL3210-1PB21-8UL0

With integrated line filter class A

6SL3210-1PB21-4AL0

6SL3210-1PB21-8AL0

Output current

at 50 Hz 230 V 1 AC

 

 

 

  • Rated current Irated 1)

A

13.6

17.5

  • For S6 duty (40 %) IS6

A

15

19.3

  • Base-load current IH2)

A

10.4

13.6

  • Maximum current Imax

A

20.8

27.2

Type rating

 

 

 

  • Based on Irated

kW (hp)

3 (4)

4 (5)

  • Based on IH

kW (hp)

2.2 (3)

3 (4)

Rated pulse frequency

kHz

4

4

Efficiency η

%

>96

>96

Power loss 3)

at rated current

kW

0.14

0.18

Cooling air requirement

m3/s (ft3/s)

0.0185 (0.65)

0.0185 (0.65)

Sound pressure level

LpA (1 m)

dB

<65

<65

24 V DC power supply

for Control Unit

A

1

1

Input current 4)

 

 

 

  • Rated current 1 AC/3 AC

A

35.9/20.7

43/24.8

  • Based on IH 1 AC/3 AC

A

31.3/18.1

37.5/21.7

Line supply connection

U1/L1, V1/L2, W1/L3

 

Terminal connector

Terminal connector

  • Conductor cross-section

mm2

6 ... 16

6 ... 16

Motor connection

U2, V2, W2

 

Terminal connector

Terminal connector

  • Conductor cross-section

mm2

6 ... 16

6 ... 16

PE connection

 

Included in terminal connector

Included in terminal connector

Motor cable length, max.

 

 

 

  • Shielded

m (ft)

50 (164)

50 (164)

  • Unshielded

m (ft)

100 (328)

100 (328)

Degree of protection

 

IP20

IP20

Dimensions

 

 

 

  • Width

mm (in)

140 (5.51)

140 (5.51)

  • Height

mm (in)

355 (13.98)

355 (13.98)

  • Depth without operator panel

mm (in)

165 (6.50)

165 (6.50)

Frame size

 

FSC

FSC

Weight, approx.

 

 

 

  • Without integrated line filter

kg (lb)

5 (11)

5 (11)

  • With integrated line filter

kg (lb)

5.2 (11.5)

5.2 (11.5)



1) The rated output current Irated is based on the duty cycle for low overload (LO).

2) The base-load current IH is based on the duty cycle for high overload (HO).

3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

4) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

 

Line voltage 200 ... 240 V 3 AC

PM240‑2 Power Modules standard variant

Without integrated line filter

6SL3210-1PC22-2UL0

6SL3210-1PC22-8UL0

6SL3210-1PC24-2UL0

6SL3210-1PC25-4UL0

6SL3210-1PC26-8UL0

With integrated line filter class A

6SL3210-1PC22-2AL0

6SL3210-1PC22-8AL0

–

–

–

Output current

at 50 Hz 230 V 3 AC

 

 

 

 

 

 

  • Rated current Irated 1)

A

22

28

42

54

68

  • For S6 duty (40 %) IS6

A

24.2

30.8

50

64

81

  • Base-load current IH2)

A

17.5

22

35

42

54

  • Maximum current Imax

A

35

44

70

84

108

Type rating

 

 

 

 

 

 

  • Based on Irated

kW (hp)

5.5 (7.5)

7.5 (10)

11 (15)

15 (20)

18.5 (25)

  • Based on IH

kW (hp)

4 (5)

5.5 (7.5)

7.5 (10)

11 (15)

15 (20)

Rated pulse frequency

kHz

4

4

4

4

4

Efficiency η

%

>97

>97

>97

>97

>97

Power loss 3)

at rated current

kW

0.2

0.26

0.42

0.57

0.76

Cooling air requirement

m3/s (ft3/s)

0.0185 (0.65)

0.0185 (0.65)

0.055 (1.9)

0.055 (1.9)

0.055 (1.9)

Sound pressure level

LpA (1 m)

dB

<65

<65

45 ... 65 4)

45 ... 65 4)

45 ... 65 4)

24 V DC power supply

for Control Unit

A

1

1

1

1

1

Input current 5)

 

 

 

 

 

 

  • Rated current

A

28.6

36.4

44

56

70

  • Based on IH

A

26.2

33

36

43

56

Line supply connection

U1/L1, V1/L2, W1/L3

 

Terminal connector

Terminal connector

Screw terminals

Screw terminals

Screw terminals

  • Conductor cross-section

mm2

6 ... 16

6 ... 16

10 ... 35

10 ... 35

10 ... 35

Motor connection

U2, V2, W2

 

Terminal connector

Terminal connector

Screw terminals

Screw terminals

Screw terminals

  • Conductor cross-section

mm2

6 ... 16

6 ... 16

10 ... 35

10 ... 35

10 ... 35

PE connection

 

Included in terminal connector

Included in terminal connector

Screw terminals

Screw terminals

Screw terminals

Motor cable length, max.

 

 

 

 

 

 

  • Shielded

m (ft)

50 (164)

50 (164)

200 (656)

200 (656)

200 (656)

  • Unshielded

m (ft)

100 (328)

100 (328)

300 (984)

300 (984)

300 (984)

Degree of protection

 

IP20

IP20

IP20

IP20

IP20

Dimensions

 

 

 

 

 

 

  • Width

mm (in)

140 (5.51)

140 (5.51)

200 (7.87)

200 (7.87)

200 (7.87)

  • Height

mm (in)

355 (13.98)

355 (13.98)

472 (18.58)

472 (18.58)

472 (18.58)

  • Depth without operator panel

mm (in)

165 (6.50)

165 (6.50)

237 (9.33)

237 (9.33)

237 (9.33)

Frame size

 

FSC

FSC

FSD

FSD

FSD

Weight, approx.

 

 

 

 

 

 

  • Without integrated line filter

kg (lb)

5 (11)

5 (11)

17 (37.5)

17 (37.5)

17 (37.5)

  • With integrated line filter

kg (lb)

5.2 (11.5)

5.2 (11.5)

–

–

–



1) The rated output current Irated is based on the duty cycle for low overload (LO).

2) The base-load current IH is based on the duty cycle for high overload (HO).

3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

4) Values dependent on ambient temperature and utilization.

5) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

 

Line voltage 200 ... 240 V 3 AC

PM240‑2 Power Modules standard variant

Without integrated line filter

6SL3210-1PC28-0UL0

6SL3210-1PC31-1UL0

6SL3210-1PC31-3UL0

6SL3210-1PC31-6UL0

6SL3210-1PC31-8UL0

With integrated line filter class A

–

–

–

–

–

Output current

at 50 Hz 230 V 3 AC

 

 

 

 

 

 

  • Rated current Irated 1)

A

80

104

130

154

178

  • For S6 duty (40 %) IS6

A

96

124

156

184

213

  • Base-load current IH2)

A

68

80

104

130

154

  • Maximum current Imax

A

136

160

208

260

308

Type rating

 

 

 

 

 

 

  • Based on Irated

kW (hp)

22 (30)

30 (40)

37 (50)

45 (60)

55 (75)

  • Based on IH

kW (hp)

18.5 (25)

22 (30)

30 (40)

37 (50)

45 (60)

Rated pulse frequency

kHz

4

4

4

4

4

Efficiency η

%

>97

>97

>97

>97

>97

Power loss 3)

at rated current

kW

0.85

1.2

1.44 (3.53)

1.79

2.18 (3.53)

Cooling air requirement

m3/s (ft3/s)

0.083 (2.9)

0.083 (2.9)

0.153 (5.4)

0.153 (5.4)

0.153 (5.4)

Sound pressure level

LpA (1 m)

dB

44 ... 62 4)

44 ... 62 4)

56 ... 68 4)

56 ... 68 4)

56 ... 68 4)

24 V DC power supply

for Control Unit

A

1

1

1

1

1

Input current 5)

 

 

 

 

 

 

  • Rated current

A

83

107

134

158

183

  • Based on IH

A

71

83

110

138

164

Line supply connection

U1/L1, V1/L2, W1/L3

 

Screw terminals

Screw terminals

M10 screw stud

M10 screw stud

M10 screw stud

  • Conductor cross-section

mm2

25 ... 70

25 ... 70

35 ... 2 Ã— 120

35 ... 2 Ã— 120

35 ... 2 Ã— 120

Motor connection

U2, V2, W2

 

Screw terminals

Screw terminals

M10 screw stud

M10 screw stud

M10 screw stud

  • Conductor cross-section

mm2

25 ... 70

25 ... 70

35 ... 2 Ã— 120

35 ... 2 Ã— 120

35 ... 2 Ã— 120

PE connection

 

Screw terminals

Screw terminals

M10 screw stud

M10 screw stud

M10 screw stud

Motor cable length, max.

 

 

 

 

 

 

  • Shielded

m (ft)

200 (656)

200 (656)

300 (984)

300 (984)

300 (984)

  • Unshielded

m (ft)

300 (984)

300 (984)

450 (1476)

450 (1476)

450 (1476)

Degree of protection

 

IP20

IP20

IP20

IP20

IP20

Dimensions

 

 

 

 

 

 

  • Width

mm (in)

275 (10.83)

275 (10.83)

305 (12.01)

305 (12.01)

305 (12.01)

  • Height

mm (in)

551 (21.69)

551 (21.69)

708 (27.87)

708 (27.87)

708 (27.87)

  • Depth without operator panel

mm (in)

237 (9.33)

237 (9.33)

357 (14.06)

357 (14.06)

357 (14.06)

Frame size

 

FSE

FSE

FSF

FSF

FSF

Weight, approx.

 

 

 

 

 

 

  • Without integrated line filter

kg (lb)

26 (57.3)

26 (57.3)

57 (126)

57 (126)

57 (126)

  • With integrated line filter

kg (lb)

–

–

–

–

–



1) The rated output current Irated is based on the duty cycle for low overload (LO).

2) The base-load current IH is based on the duty cycle for high overload (HO).

3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

4) Values dependent on ambient temperature and utilization.

5) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

 

Line voltage 380 ... 480 V 3 AC

PM240‑2 Power Modules standard variant

Without integrated line filter

6SL3210-1PE11-8UL1

6SL3210-1PE12-3UL1

6SL3210-1PE13-2UL1

6SL3210-1PE14-3UL1

6SL3210-1PE16-1UL1

6SL3210-1PE18-0UL1

With integrated line filter class A

6SL3210-1PE11-8AL1

6SL3210-1PE12-3AL1

6SL3210-1PE13-2AL1

6SL3210-1PE14-3AL1

6SL3210-1PE16-1AL1

6SL3210-1PE18-0AL1

Output current

at 50 Hz 400 V 3 AC

 

 

 

 

 

 

 

  • Rated current Irated1)

A

1.7

2.2

3.1

4.1

5.9

7.7

  • For S6 duty (40 %) IS6

A

2

2.5

3.5

4.5

6.5

8.5

  • Base-load current IH2)

A

1.3

1.7

2.2

3.1

4.1

5.9

  • Maximum current Imax

A

2.6

3.4

4.7

6.2

8.9

11.8

Type rating

 

 

 

 

 

 

 

  • Based on Irated

kW (hp)

0.55 (0.75)

0.75 (1)

1.1 (1.5)

1.5 (2)

2.2 (3)

3 (4)

  • Based on IH

kW (hp)

0.37 (0.5)

0.55 (0.75)

0.75 (1)

1.1 (1.5)

1.5 (2)

2.2 (3)

Rated pulse frequency

kHz

4

4

4

4

4

4

Efficiency η

%

>96

>96

>96

>96

>96

>96

Power loss 3)

at rated current

kW

0.04

0.04

0.04

0.07

0.1

0.12

Cooling air requirement

m3/s (ft3/s)

0.005 (0.18)

0.005 (0.18)

0.005 (0.18)

0.005 (0.18)

0.005 (0.18)

0.005 (0.18)

Sound pressure level

LpA (1 m)

dB

<50

<50

<50

<50

< 56.3

< 56.3

24 V DC power supply

for Control Unit

A

1

1

1

1

1

1

Input current 4)

 

 

 

 

 

 

 

  • Rated current

A

2.3

2.9

4.1

5.5

7.7

10.1

  • Based on IH

A

2

2.6

3.3

4.7

6.1

8.8

Line supply connection

U1/L1, V1/L2, W1/L3

 

Terminal connector

Terminal connector

Terminal connector

Terminal connector

Terminal connector

Terminal connector

  • Conductor cross-section

mm2

1 ... 2.5

1 ... 2.5

1 ... 2.5

1 ... 2.5

1 ... 2.5

1 ... 2.5

Motor connection

U2, V2, W2

 

Terminal connector

Terminal connector

Terminal connector

Terminal connector

Terminal connector

Terminal connector

  • Conductor cross-section

mm2

1 ... 2.5

1 ... 2.5

1 ... 2.5

1 ... 2.5

1 ... 2.5

1 ... 2.5

PE connection

 

Included in terminal connector

Included in terminal connector

Included in terminal connector

Included in terminal connector

Included in terminal connector

Included in terminal connector

Motor cable length, max.

 

 

 

 

 

 

 

  • Without filter, shielded/unshielded

m (ft)

150/150 (492/492)

150/150 (492/492)

150/150 (492/492)

150/150 (492/492)

150/150 (492/492)

150/150 (492/492)

  • With integrated filter class A, shielded/unshielded

m (ft)

50/100 (164/328)

50/100 (164/328)

50/100 (164/328)

50/100 (164/328)

50/100 (164/328)

50/100 (164/328)

Degree of protection

 

IP20

IP20

IP20

IP20

IP20

IP20

Dimensions

 

 

 

 

 

 

 

  • Width

mm (in)

73 (2.87)

73 (2.87)

73 (2.87)

73 (2.87)

73 (2.87)

73 (2.87)

  • Height

mm (in)

196 (7.72)

196 (7.72)

196 (7.72)

196 (7.72)

196 (7.72)

196 (7.72)

  • Depth without operator panel

mm (in)

165 (6.50)

165 (6.50)

165 (6.50)

165 (6.50)

165 (6.50)

165 (6.50)

Frame size

 

FSA

FSA

FSA

FSA

FSA

FSA

Weight, approx.

 

 

 

 

 

 

 

  • Without integrated line filter

kg (lb)

1.4 (3.09)

1.4 (3.09)

1.4 (3.09)

1.4 (3.09)

1.4 (3.09)

1.4 (3.09)

  • With integrated line filter

kg (lb)

1.5 (3.31)

1.5 (3.31)

1.5 (3.31)

1.5 (3.31)

1.5 (3.31)

1.5 (3.31)



1) The rated output current Irated is based on the duty cycle for low overload (LO).

2) The base-load current IH is based on the duty cycle for high overload (HO).

3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

4) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

 

Line voltage 380 ... 480 V 3 AC

PM240‑2 Power Modules standard variant

Without integrated line filter

6SL3210-1PE21-1UL0

6SL3210-1PE21-4UL0

6SL3210-1PE21-8UL0

6SL3210-1PE22-7UL0

6SL3210-1PE23-3UL0

With integrated line filter class A

6SL3210-1PE21-1AL0

6SL3210-1PE21-4AL0

6SL3210-1PE21-8AL0

6SL3210-1PE22-7AL0

6SL3210-1PE23-3AL0

Output current

at 50 Hz 400 V 3 AC

 

 

 

 

 

 

  • Rated current Irated1)

A

10.2

13.2

18

26

32

  • For S6 duty (40 %) IS6

A

11.2

14.5

19.8

28.6

37.1

  • Base-load current IH2)

A

7.7

10.2

13.2

18

26

  • Maximum current Imax

A

15.4

20.4

27

39

52

Type rating

 

 

 

 

 

 

  • Based on Irated

kW (hp)

4 (5)

5.5 (7.5)

7.5 (10)

11 (15)

15 (20)

  • Based on IH

kW (hp)

3 (4)

4 (5)

5.5 (7.5)

7.5 (10)

11 (15)

Rated pulse frequency

kHz

4

4

4

4

4

Efficiency η

%

>97

>97

>97

>97

>97

Power loss 3)

at rated current

kW

0.11

0.15

0.2

0.3

0.37

Cooling air requirement

m3/s (ft3/s)

0.0092 (0.32)

0.0092 (0.32)

0.0092 (0.32)

0.0185 (0.65)

0.0185 (0.65)

Sound pressure level

LpA (1 m)

dB

<62

<62

<62

<65

<65

24 V DC power supply

for Control Unit

A

1

1

1

1

1

Input current 4)

 

 

 

 

 

 

  • Rated current

A

13.3

17.2

22.2

32.6

39.9

  • Based on IH

A

11.6

15.3

19.8

27

36

Line supply connection

U1/L1, V1/L2, W1/L3

 

Terminal connector

Terminal connector

Terminal connector

Terminal connector

Terminal connector

  • Conductor cross-section

mm2

1.5 ... 6

1.5 ... 6

1.5 ... 6

6 ... 16

6 ... 16

Motor connection

U2, V2, W2

 

Terminal connector

Terminal connector

Terminal connector

Terminal connector

Terminal connector

  • Conductor cross-section

mm2

1.5 ... 6

1.5 ... 6

1.5 ... 6

6 ... 16

6 ... 16

PE connection

 

Included in terminal connector

Included in terminal connector

Included in terminal connector

Included in terminal connector

Included in terminal connector

Motor cable length, max.

 

 

 

 

 

 

  • Without filter, shielded/unshielded

m (ft)

150/150 (492/492)

150/150 (492/492)

150/150 (492/492)

150/150 (492/492)

150/150 (492/492)

  • With integrated filter class A, shielded/unshielded

m (ft)

100/100 (328/328) 5)

100/100 (328/328) 5)

100/100 (328/328) 5)

150/150 (492/492) 5)

150/150 (492/492) 5)

Degree of protection

 

IP20

IP20

IP20

IP20

IP20

Dimensions

 

 

 

 

 

 

  • Width

mm (in)

100 (3.94)

100 (3.94)

100 (3.94)

140 (5.51)

140 (5.51)

  • Height

mm (in)

291 (11.46)

291 (11.46)

291 (11.46)

355 (13.98)

355 (13.98)

  • Depth without operator panel

mm (in)

165 (6.50)

165 (6.50)

165 (6.50)

165 (6.50)

165 (6.50)

Frame size

 

FSB

FSB

FSB

FSC

FSC

Weight, approx.

 

 

 

 

 

 

  • Without integrated line filter

kg (lb)

2.9 (6.39)

2.9 (6.39)

3 (6.62)

4.7 (10.4)

4.8 (10.6)

  • With integrated line filter

kg (lb)

3.1 (6.84)

3.1 (6.84)

3.2 (7.06)

5.3 (11.7)

5.4 (11.9)



1) The rated output current Irated is based on the duty cycle for low overload (LO).

2) The base-load current IH is based on the duty cycle for high overload (HO).

3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

4) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

5) The values are applicable for low capacitance cables, e.g. MOTION‑CONNECT. For standard CY cables the max. permissible motor cable length is 50 m (164 ft) (shielded).

 

Line voltage 380 ... 480 V 3 AC

PM240‑2 Power Modules standard variant

Without integrated line filter

6SL3210-1PE23-8UL0

6SL3210-1PE24-5UL0

6SL3210-1PE26-0UL0

6SL3210-1PE27-5UL0

6SL3210-1PE28-8UL0

6SL3210-1PE31-1UL0

With integrated line filter class A

6SL3210-1PE23-8AL0

6SL3210-1PE24-5AL0

6SL3210-1PE26-0AL0

6SL3210-1PE27-5AL0

6SL3210-1PE28-8AL0

6SL3210-1PE31-1AL0

Output current

at 50 Hz 400 V 3 AC

 

 

 

 

 

 

 

  • Rated current Irated1)

A

38

45

60

75

90

110

  • For S6 duty (40 %) IS6

A

45

54

72

90

108

132

  • Base-load current IH2)

A

32

38

45

60

75

90

  • Maximum current Imax

A

64

76

90

120

150

180

Type rating

 

 

 

 

 

 

 

  • Based on Irated

kW (hp)

18.5 (25)

22 (30)

30 (40)

37 (50)

45 (60)

55 (75)

  • Based on IH

kW (hp)

15 (20)

18.5 (25)

22 (30)

30 (40)

37 (50)

45 (60)

Rated pulse frequency

kHz

4

4

4

4

4

4

Efficiency η

%

>97

>97

>97

>97

>97

>97

Power loss 3)

at rated current

kW

0.55 (0.74)

0.68

0.77

1.02

1.2

1.55

Cooling air requirement

m3/s (ft3/s)

0.055 (1.9)

0.055 (1.9)

0.055 (1.9)

0.055 (1.9)

0.083 (2.9)

0.083 (2.9)

Sound pressure level

LpA (1 m)

dB

45 ... 65 4)

45 ... 65 4)

45 ... 65 4)

45 ... 65 4)

44 ... 62 4)

44 ... 62 4)

24 V DC power supply

for Control Unit

A

1

1

1

1

1

1

Input current 5)

 

 

 

 

 

 

 

  • Rated current

A

39

47

62 (

77

93

113

  • Based on IH

A

33

38

47

62

78

94

Line supply connection

U1/L1, V1/L2, W1/L3

 

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Screw terminals

  • Conductor cross-section

mm2

10 ... 35

10 ... 35

10 ... 35

10 ... 35

25 ... 70

25 ... 70

Motor connection

U2, V2, W2

 

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Screw terminals

  • Conductor cross-section

mm2

10 ... 35

10 ... 35

10 ... 35

10 ... 35

25 ... 70

25 ... 70

PE connection

 

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Motor cable length, max.

 

 

 

 

 

 

 

  • Shielded

m (ft)

200 (656)

200 (656)

200 (656)

200 (656)

200 (656)

200 (656)

  • Unshielded

m (ft)

300 (984)

300 (984)

300 (984)

300 (984)

300 (984)

300 (984)

Degree of protection

 

IP20

IP20

IP20

IP20

IP20

IP20

Dimensions

 

 

 

 

 

 

 

  • Width

mm (in)

200 (7.87)

200 (7.87)

200 (7.87)

200 (7.87)

275 (10.83)

275 (10.83)

  • Height

mm (in)

472 (18.58)

472 (18.58)

472 (18.58)

472 (18.58)

551 (21.69)

551 (21.69)

  • Depth without operator panel

mm (in)

237 (9.33)

237 (9.33)

237 (9.33)

237 (9.33)

237 (9.33)

237 (9.33)

Frame size

 

FSD

FSD

FSD

FSD

FSE

FSE

Weight, approx.

 

 

 

 

 

 

 

  • Without integrated line filter

kg (lb)

16 (35.3)

16 (35.3)

17 (37.5)

17 (37.5)

26 (57.3)

26 (57.3)

  • With integrated line filter

kg (lb)

17.5 (38.6)

17.5 (38.6)

18.5 (40.8)

18.5 (40.8)

28 (61.7)

28 (61.7)



1) The rated output current Irated is based on the duty cycle for low overload (LO).

2) The base-load current IH is based on the duty cycle for high overload (HO).

3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

4) Values dependent on ambient temperature and utilization.

5) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

 

Line voltage 380 ... 480 V 3 AC

PM240‑2 Power Modules standard variant

Without integrated line filter

6SL3210-1PE31-5UL0

6SL3210-1PE31-8UL0

6SL3210-1PE32-1UL0

6SL3210-1PE32-5UL0

With integrated line filter class A

6SL3210-1PE31-5AL0

6SL3210-1PE31-8AL0

6SL3210-1PE32-1AL0

6SL3210-1PE32-5AL0

Output current

at 50 Hz 400 V 3 AC

 

 

 

 

 

  • Rated current Irated1)

A

145

178

205

250

  • For S6 duty (40 %) IS6

A

174

213

246

300

  • Base-load current IH2)

A

110

145

178

205

  • Maximum current Imax

A

220

290

356

410

Type rating

 

 

 

 

 

  • Based on Irated

kW (hp)

75 (100)

90 (125)

110 (150)

132 (200)

  • Based on IH

kW (hp)

55 (75)

75 (100)

90 (125)

110 (150)

Rated pulse frequency

kHz

4

4

2

2

Efficiency η

%

>97

>97

>97

>97

Power loss 3)

at rated current

kW

1.79

2.33

2.17

2.84

Cooling air requirement

m3/s (ft3/s)

0.2 (7.1)

0.2 (7.1)

0.2 (7.1)

0.2 (7.1)

Sound pressure level

LpA (1 m)

dB

56 ... 68 4)

56 ... 68 4)

56 ... 68 4)

56 ... 68 4)

24 V DC power supply

for Control Unit

A

1

1

1

1

Input current 5)

 

 

 

 

 

  • Rated current

A

149

183

211

257

  • Based on IH

A

117

154

189

218

Line supply connection

U1/L1, V1/L2, W1/L3

 

M10 screw stud

M10 screw stud

M10 screw stud

M10 screw stud

  • Conductor cross-section

mm2

35 ... 2 Ã— 120

35 ... 2 Ã— 120

35 ... 2 Ã— 120

35 ... 2 Ã— 120

Motor connection

U2, V2, W2

 

M10 screw stud

M10 screw stud

M10 screw stud

M10 screw stud

  • Conductor cross-section

mm2

35 ... 2 Ã— 120

35 ... 2 Ã— 120

35 ... 2 Ã— 120

35 ... 2 Ã— 120

PE connection

 

M10 screw stud

M10 screw stud

M10 screw stud

M10 screw stud

Motor cable length, max.

 

 

 

 

 

  • Shielded

m (ft)

300 (984)

300 (984)

300 (984)

300 (984)

  • Unshielded

m (ft)

450 (1476)

450 (1476)

450 (1476)

450 (1476)

Degree of protection

 

IP20

IP20

IP20

IP20

Dimensions

 

 

 

 

 

  • Width

mm (in)

305 (12.01)

305 (12.01)

305 (12.01)

305 (12.01)

  • Height

mm (in)

708 (27.87)

708 (27.87)

708 (27.87)

708 (27.87)

  • Depth without operator panel

mm (in)

357 (14.06)

357 (14.06)

357 (14.06)

357 (14.06)

Frame size

 

FSF

FSF

FSF

FSF

Weight, approx.

 

 

 

 

 

  • Without integrated line filter

kg (lb)

57 (126)

57 (126)

61 (135)

61 (135)

  • With integrated line filter

kg (lb)

63 (139)

63 (139)

65 (143)

65 (143)



1) The rated output current Irated is based on the duty cycle for low overload (LO).

2) The base-load current IH is based on the duty cycle for high overload (HO).

3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

4) Values dependent on ambient temperature and utilization.

5) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

 

Line voltage 500 ... 690 V 3 AC

PM240‑2 Power Modules standard variant

Without integrated line filter

6SL3210-1PH21-4UL0

6SL3210-1PH22-0UL0

6SL3210-1PH22-3UL0

6SL3210-1PH22-7UL0

6SL3210-1PH23-5UL0

6SL3210-1PH24-2UL0

With integrated line filter class A

6SL3210-1PH21-4AL0

6SL3210-1PH22-0AL0

6SL3210-1PH22-3AL0

6SL3210-1PH22-7AL0

6SL3210-1PH23-5AL0

6SL3210-1PH24-2AL0

Output current

at 50 Hz 690 V 3 AC

 

 

 

 

 

 

 

  • Rated current Irated 1)

A

14

19

23

27

35

42

  • For S6 duty (40 %) IS6

A

16

22

27

32

42

50

  • Base-load current IH2)

A

11

14

19

23

27

35

  • Maximum current Imax

A

22

29

38

46

54

70

Type rating

 

 

 

 

 

 

 

  • Based on Irated

kW (hp)

11 (10)

15 (15)

18.5 (20)

22 (25)

30 (30)

37 (40)

  • Based on IH

kW (hp)

7.5 (7.5)

11 (10)

15 (15)

18.5 (20)

22 (25)

30 (30)

Rated pulse frequency

kHz

2

2

2

2

2

2

Efficiency η

%

>98

>98

>98

>98

>98

>98

Power loss 3)

at rated current

kW

0.32

0.41

0.48

0.56

0.73

0.88

Cooling air requirement

m3/s (ft3/s)

0.055 (1.9)

0.055 (1.9)

0.055 (1.9)

0.055 (1.9)

0.055 (1.9)

0.055 (1.9)

Sound pressure level

LpA (1 m)

dB

45 ... 65 4)

45 ... 65 4)

45 ... 65 4)

45 ... 65 4)

45 ... 65 4)

45 ... 65 4)

24 V DC power supply

for Control Unit

A

1

1

1

1

1

1

Input current 5)

 

 

 

 

 

 

 

  • Rated current

A

15

20

24

28

36

44

  • Based on IH

A

11

14

20

24

28

36

Line supply connection

U1/L1, V1/L2, W1/L3

 

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Screw terminals

  • Conductor cross-section

mm2

10 ... 35

10 ... 35

10 ... 35

10 ... 35

10 ... 35

10 ... 35

Motor connection

U2, V2, W2

 

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Screw terminals

  • Conductor cross-section

mm2

10 ... 35

10 ... 35

10 ... 35

10 ... 35

10 ... 35

10 ... 35

PE connection

 

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Screw terminals

Motor cable length, max.

 

 

 

 

 

 

 

  • Shielded

m (ft)

200 (656)

200 (656)

200 (656)

200 (656)

200 (656)

200 (656)

  • Unshielded

m (ft)

300 (984)

300 (984)

300 (984)

300 (984)

300 (984)

300 (984)

Degree of protection

 

IP20

IP20

IP20

IP20

IP20

IP20

Dimensions

 

 

 

 

 

 

 

  • Width

mm (in)

200 (7.87)

200 (7.87)

200 (7.87)

200 (7.87)

200 (7.87)

200 (7.87)

  • Height

mm (in)

472 (18.58)

472 (18.58)

472 (18.58)

472 (18.58)

472 (18.58)

472 (18.58)

  • Depth without operator panel

mm (in)

237 (9.33)

237 (9.33)

237 (9.33)

237 (9.33)

237 (9.33)

237 (9.33)

Frame size

 

FSD

FSD

FSD

FSD

FSD

FSD

Weight, approx.

 

 

 

 

 

 

 

  • Without integrated line filter

kg (lb)

17 (37.5)

17 (37.5)

17 (37.5)

17 (37.5)

17 (37.5)

17 (37.5)

  • With integrated line filter

kg (lb)

18.5 (40.8)

18.5 (40.8)

18.5 (40.8)

18.5 (40.8)

18.5 (40.8)

18.5 (40.8)



1) The rated output current Irated is based on the duty cycle for low overload (LO).

2) The base-load current IH is based on the duty cycle for high overload (HO).

3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

4) Values dependent on ambient temperature and utilization.

5) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

 

Line voltage 500 ... 690 V 3 AC

PM240‑2 Power Modules standard variant

Without integrated line filter

6SL3210-1PH25-2UL0

6SL3210-1PH26-2UL0

6SL3210-1PH28-0UL0

6SL3210-1PH31-0UL0

6SL3210-1PH31-2UL0

6SL3210-1PH31-4UL0

With integrated line filter class A

6SL3210-1PH25-2AL0

6SL3210-1PH26-2AL0

6SL3210-1PH28-0AL0

6SL3210-1PH31-0AL0

6SL3210-1PH31-2AL0

6SL3210-1PH31-4AL0

Output current

at 50 Hz 690 V 3 AC

 

 

 

 

 

 

 

  • Rated current Irated 1)

A

52

62

80

100

115

142

  • For S6 duty (40 %) IS6

A

62

74

96

120

138

170

  • Base-load current IH2)

A

42

52

62

80

100

115

  • Maximum current Imax

A

84

104

124

160

200

230

Type rating

 

 

 

 

 

 

 

  • Based on Irated

kW (hp)

45 (50)

55 (60)

75 (75)

90 (100)

110 (100)

132 (125)

  • Based on IH

kW (hp)

37 (40)

45 (50)

55 (60)

75 (75)

90 (100)

110 (100)

Rated pulse frequency

kHz

2

2

2

2

2

2

Efficiency η

%

>98

>98

>98

>98

>98

>98

Power loss 3)

at rated current

kW

1

1.21

1.23

1.57

1.83

2.35

Cooling air requirement

m3/s (ft3/s)

0.083 (2.9)

0.083 (2.9)

0.083 (2.9)

0.083 (2.9)

0.2 (7.1)

0.2 (7.1)

Sound pressure level

LpA (1 m)

dB

44 ... 62 4)

44 ... 62 4)

56 ... 68 4)

56 ... 68 4)

56 ... 68 4)

56 ... 68 4)

24 V DC power supply

for Control Unit

A

1

1

1

1

1

1

Input current 5)

 

 

 

 

 

 

 

  • Rated current

A

50

59

78

97

111

137

  • Based on IH

A

44

54

66

85

106

122

Line supply connection

U1/L1, V1/L2, W1/L3

 

Screw terminals

Screw terminals

M10 screw stud

M10 screw stud

M10 screw stud

M10 screw stud

  • Conductor cross-section

mm2

25 ... 70

25 ... 70

35 ... 2 Ã— 120

35 ... 2 Ã— 120

35 ... 2 Ã— 120

35 ... 2 Ã— 120

Motor connection

U2, V2, W2

 

Screw terminals

Screw terminals

M10 screw stud

M10 screw stud

M10 screw stud

M10 screw stud

  • Conductor cross-section

mm2

25 ... 70

25 ... 70

35 ... 2 Ã— 120

35 ... 2 Ã— 120

35 ... 2 Ã— 120

35 ... 2 Ã— 120

PE connection

 

Screw terminals

Screw terminals

M10 screw stud

M10 screw stud

M10 screw stud

M10 screw stud

Motor cable length, max.

 

 

 

 

 

 

 

  • Shielded

m (ft)

200 (656)

200 (656)

300 (984)

300 (984)

300 (984)

300 (984)

  • Unshielded

m (ft)

300 (984)

300 (984)

450 (1476)

450 (1476)

450 (1476)

450 (1476)

Degree of protection

 

IP20

IP20

IP20

IP20

IP20

IP20

Dimensions

 

 

 

 

 

 

 

  • Width

mm (in)

275 (10.83)

275 (10.83)

305 (12.01)

305 (12.01)

305 (12.01)

305 (12.01)

  • Height

mm (in)

551 (21.69)

551 (21.69)

708 (27.87)

708 (27.87)

708 (27.87)

708 (27.87)

  • Depth without operator panel

mm (in)

237 (9.33)

237 (9.33)

357 (14.06)

357 (14.06)

357 (14.06)

357 (14.06)

Frame size

 

FSE

FSE

FSF

FSF

FSF

FSF

Weight, approx.

 

 

 

 

 

 

 

  • Without integrated line filter

kg (lb)

26 (57.3)

26 (57.3)

60 (132.3)

60 (132.3)

60 (132.3)

60 (132.3)

  • With integrated line filter

kg (lb)

28 (61.7)

28 (61.7)

64 (141)

64 (141)

64 (141)

64 (141)



1) The rated output current Irated is based on the duty cycle for low overload (LO).

2) The base-load current IH is based on the duty cycle for high overload (HO).

3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

4) Values dependent on ambient temperature and utilization.

5) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

 

PM240‑2 Power Modules push-through variant

Line voltage 200 ... 240 V 1 AC/3 AC

PM240‑2 Power Modules push-through variant

Without integrated line filter

6SL3211-1PB13-8UL0

6SL3211-1PB21-0UL0

6SL3211-1PB21-8UL0

With integrated line filter class A

6SL3211-1PB13-8AL0

6SL3211-1PB21-0AL0

6SL3211-1PB21-8AL0

Output current

At 50 Hz 230 V 1 AC/3 AC

 

 

 

 

  • Rated current Irated 1)

A

3.9

10.4

17.5

  • For S6 duty (40 %) IS6

A

3.3

11.5

19.3

  • Base-load current IH2)

A

3

7.4

13.6

  • Maximum current Imax

A

6 (0.24)

15.6

27.2

Type rating

 

 

 

 

  • Based on Irated

kW (hp)

0.75 (1)

2.2 (3)

4 (5)

  • Based on IH

kW (hp)

0.55 (0.75)

1.5 (2)

3 (4)

Rated pulse frequency

kHz

4

4

4

Efficiency η

%

>96

>96

>96

Power loss 3)

at rated current

kW

0.04

0.12

0.18

Cooling air requirement

m3/s (ft3/s)

0.005 (0.18)

0.0092 (0.3)

0.0185 (0.7)

Sound pressure level

LpA (1 m)

dB

<56

<62

<65

24 V DC power supply

for Control Unit

A

1

1

1

Input current 4)

 

 

 

 

  • Rated current 1 AC/3 AC

A

9.6/5.5

24/13.9

43/24.8

  • Based on IH 1 AC/3 AC

A

8.4/4.8

20.9/12.1

37.5/21.7

Line supply connection

U1/L1, V1/L2, W1/L3

 

Screw terminals, plug-in

Screw terminals, plug-in

Screw terminals, plug-in

  • Conductor cross-section

mm2

1.5 ... 2.5

1.5 ... 6

6 ... 16

Motor connection

U2, V2, W2

 

Screw terminals, plug-in

Screw terminals, plug-in

Screw terminals, plug-in

  • Conductor cross-section

mm2

1.5 ... 2.5

1.5 ... 6

6 ... 16

Motor cable length, max.

 

 

 

 

  • Shielded

m (ft)

150 (492)

150 (492)

150 (492)

  • Unshielded

m (ft)

150 (492)

150 (492)

150 (492)

Degree of protection

 

IP20

IP20

IP20

Dimensions

 

 

 

 

  • Width

mm (in)

126 (4.96)

154 (6.06)

200 (7.87)

  • Height

mm (in)

238 (9.37)

345 (13.58)

411 (16.18)

  • Depth without operator panel

mm (in)

171 (6.73)

171 (6.73)

171 (6.73)

Frame size

 

FSA

FSB

FSC

Weight, approx.

With integrated line filter

 

 

 

 

  • Without integrated line filter

kg (lb)

1.8 (3.97)

3.4 (7.50)

5.8 (12.8)

  • With integrated line filter

kg (lb)

2 (4.41)

3.7 (8.16)

6.3 (13.9)



1) The rated output current Irated is based on the duty cycle for low overload (LO).

2) The base-load current IH is based on the duty cycle for high overload (HO).

3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load with the type rating (based on Irated) – these current values are specified on the rating plate.

 

Line voltage 380 ... 480 V 3 AC

PM240‑2 Power Modules push-through variant

Without integrated line filter

6SL3211-1PE18-0UL1

6SL3211-1PE21-8UL0

6SL3211-1PE23-3UL0

With integrated line filter class A

6SL3211-1PE18-0AL1

6SL3211-1PE21-8AL0

6SL3211-1PE23-3AL0

Output current

at 50 Hz 400 V 3 AC

 

 

 

 

  • Rated current Irated1)

A

7.7

18

32

  • For S6 duty (40 %) IS6

A

8.5

19.8

37.1

  • Base-load current IH2)

A

5.9

13.2

26

  • Maximum current Imax

A

11.8

27

52

Type rating

 

 

 

 

  • Based on Irated

kW (hp)

3 (4)

7.5 (10)

15 (20)

  • Based on IH

kW (hp)

2.2 (7.5)

5.5 (7.5)

11 (15)

Rated pulse frequency

kHz

4

4

4

Efficiency η

%

>96

>97

>97

Power loss 3)

at rated current

kW

0.113

0.239

0.385

Cooling air requirement

m3/s (ft3/s)

0.007 (0.2)

0.0092 (0.3)

0.0185 (0.7)

Sound pressure level

LpA (1 m)

dB

<56

<62

<65

24 V DC power supply

for Control Unit

A

1

1

1

Input current 4)

 

 

 

 

  • Rated current

A

10.1

22.2

39.9

  • Based on IH

A

8.8

19.8

36

Line supply connection

U1/L1, V1/L2, W1/L3

 

Screw terminals, plug-in

Screw terminals, plug-in

Screw terminals, plug-in

  • Conductor cross-section

mm2

1.5 ... 2.5

1.5 ... 6

6 ... 16

Motor connection

U2, V2, W2

 

Screw terminals, plug-in

Screw terminals, plug-in

Screw terminals, plug-in

  • Conductor cross-section

mm2

1.5 ... 2.5

1.5 ... 6

6 ... 16

Motor cable length, max.

 

 

 

 

  • Without filter, shielded/unshielded

m (ft)

150/150 (492/492)

150/150 (492/492)

150/150 (492/492)

  • With integrated filter class A, shielded/unshielded

m (ft)

50/100 (164/328)

100/100 (328/328) 5)

150/150 (492/492) 5)

Degree of protection

 

IP20

IP20

IP20

Dimensions

 

 

 

 

  • Width

mm (in)

126 (4.96)

154 (6.06)

200 (7.87)

  • Height

mm (in)

238 (9.37)

345 (13.58)

411 (16.18)

  • Depth without operator panel

mm (in)

171 (6.73)

171 (6.73)

171 (6.73)

Frame size

 

FSA

FSB

FSC

Weight, approx.

With integrated line filter

 

 

 

 

  • Without integrated line filter

kg (lb)

1.7 (3.75)

3.6 (7.94)

5.8 (12.8)

  • With integrated line filter

kg (lb)

1.8 (3.97)

3.9 (8.60)

6.3 (13.9)



1) The rated output current Irated is based on the duty cycle for low overload (LO).

2) The base-load current IH is based on the duty cycle for high overload (HO).

3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load with the type rating (based on Irated) – these current values are specified on the rating plate.

5) The values are applicable for low capacitance cables, e.g. MOTION‑CONNECT. For standard CY cables the max. permissible motor cable length is 50 m (164 ft) (shielded).
skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Àðìàòóðà DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Äàò÷èêè è èçìåðèòåëè

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ðåãóëÿòîðû è ðåãèñòðàòîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ïíåâìàòè÷åñêîå îáîðóäîâàíèå

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Êðàíû è Êëàïàíû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Èçìåðèòåëüíûå ïðèáîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ñèñòåìû áåñïðîâîäíîãî óïðàâëåíèÿ «óìíûé äîì»

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Áåñêîíòàêòíûå âûêëþ÷àòåëè Êîíå÷íûå âûêëþ÷àòåëè Îïòè÷åñêèå äàò÷èêè Ýíêîäåðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Óñòàíîâêà óìÿã÷åíèÿ

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Óñòàíîâêà îáåçæåëåçèâàíèÿ
Êàòàëîã îáîðóäîâàíèÿ 2018
Siemens Industry Catalog Drive technology Automation technology Energy Building Technologies Low-Voltage controls and distribution Safety Systems - Safety Integrated Market-specific solutions Automotive industry Biofuels and bioenergy Chemical and petrochemical industries Food, drinks and tobacco industry Machine building Packaging machines Printing presses Textile machines Converting Tire production machines Metal forming technology Glass production machines Handling systems Solar production machines Ceramics and stone processing machines Cranes SIMOCRANE crane technology platform SIMOCRANE Standard Technology SIMOCRANE Advanced Technology SIMOCRANE CMS Crane Management System SIMOCRANE application examples Drive systems System overview for crane concepts SINAMICS S120 built-in units System data Control Units Booksize format Chassis format Blocksize format Air-cooled Power Modules in blocksize format Line filters for blocksize format Line reactors for blocksize format Recommended line-side power components for blocksize format Braking resistors for blocksize format Output reactors for blocksize format Push-through mounting frame for blocksize format Safe Brake Relay for blocksize format Supplementary system components Encoder system connection MOTION-CONNECT connection systems Safety Integrated SINAMICS S120 Cabinet Modules SIMOTRAS HD AC power controller SIMOTICS motors for cranes Services and documentation Appendix Plastics Machine Tools Drive applications Mining and Metals Oil and gas industry Pharmaceutical industry Pulp and paper industry Water / wastewater Electrical wholesale Industry Services Software ... and everything else you need




  © ÎÎÎ "ÑÊ ÝÍÅÐÃÎ" 2007-2022
  (4872) 700-366  skenergo@mail.ru 		ßíäåêñ.Ìåòðèêà