Configuration information

For the use of a fail-safe expansion module

вњ“ Available

-- Not available

For the use of a SIMOCODE pro V PROFIBUS basic unit (with product version lower than E15) or SIMOCODE pro V Modbus RTU (with product version lower than E03)

When using an operator panel with display, please note that the type and number of expansion modules that can be connected are limited, see:

• TIA Selection Tool: https://www.siemens.com/tia-selection-tool
• SIMOCODE pro Manual Collection: https://support.industry.siemens.com/cs/ww/en/view/109743951

Instructions for the use of 2nd-generation current/voltage measuring modules for SIMOCODE pro V

For the use of 2nd-generation current/voltage measuring modules, SIMOCODE pro V PROFIBUS with product version E15 (V 4.0) must be ordered. This version does not have all available marine certifications and does not have a NEPSI certificate. It can be ordered at no extra charge. The article number must be supplemented by "-Z" and the order code "B01", e.g. 3UF7010-1AB00-0 -Z B01.

For the use of 2nd-generation current/voltage measuring modules, SIMOCODE pro V Modbus RTU with product version E03 (V2.0) must be ordered. This version does not have marine certification or CCC approval and can be ordered at no extra charge. The article number must be supplemented by "-Z" and the order code "B01", e.g. 3UF7012-1AB00-0 -Z B01.

Protective separation

All circuits in SIMOCODE pro are safely isolated from each other in according to IEC 60947-1. That is, they are designed with double creepages and clearances. In the event of a fault, therefore, no parasitic voltages can be formed in neighboring circuits. The instructions of Test log No. 2668 must be complied with.

Types of protection EEx e and EEx d

The overload protection and the thermistor motor protection of the SIMOCODE pro system comply with the requirements for overload protection of explosion-protected motors to the type of protection:

• EEx d "flameproof enclosure" e. g. according to IEC 60079-1
• EEx e "increased safety" e. g. according to IEC 60079-7.

When using SIMOCODE pro devices with a 24 V DC control voltage, electrical separation must be ensured using a battery or a safety transformer according to IEC 61558-2-6. EC type test certificate: BVS 06 ATEX F 001 Test log: BVS PP 05.2029 EC.