SIMOCODE pro S for efficient entry into motor management and SIMOCODE pro V for maximum functionality

SIMOCODE pro is a flexible, modular motor management system for motors with constant speeds in the low-voltage performance range. It optimizes the connection between I&C and motor feeder, increases plant availability and allows significant savings to be made for startup, operation and maintenance of a system.

SIMOCODE pro offers, for example:

• Multifunctional, solid-state full motor protection which is independent of the automation system
• Integrated control functions instead of hardware for the motor control
• Detailed operational, service and diagnostics data
• Open communication via PROFIBUS DP, PROFINET/OPC UA, Modbus RTU or EtherNet/IP
• Safety relay function for the fail-safe disconnection of motors up to SIL 3 (IEC 61508, IEC 62061) or PL e with Category 4 (EN ISO 13849-1)
• SIMOCODE ES is the software package for SIMOCODE pro parameterization, start-up and diagnostics.

Device series

SIMOCODE pro C

The compact system for direct-on-line starters and reversing starters or for controlling a motor starter protector.

SIMOCODE pro S

The smart system for direct-on-line, reversing, and wye-delta starters or for controlling a motor starter protector or soft starter. As it can be expanded with a multifunction module, it offers an extensive range of inputs and outputs, precise ground-fault detection via the 3UL23 residual current transformer and temperature detection.

SIMOCODE pro V

The variable system with all control functions and with the possibility of expanding the inputs, outputs and functions of the system at will using expansion modules

вњ“ Possible

-- Not possible

1) Maximum five expansion modules.

2) The failsafe digital module can be used instead of one of the two digital modules.

Per feeder each system always comprises one basic unit and one separate current measuring module. The two modules are connected together electrically through the system interface with a connection cable and can be mounted mechanically connected as a unit (one behind the other) or separately (side by side). The motor current to be monitored is decisive only for the choice of current measuring module.

An operator panel for mounting in the control cabinet door is optionally connectable through a second system interface on the basic unit. Both the current measuring module and the operator panel are electrically supplied by the basic unit through the connection cable. More inputs, outputs and functions can be added to the SIMOCODE pro V and SIMOCODE pro S by means of optional expansion modules, thus supplementing the inputs and outputs already existing on the basic unit. With the DM-F Local and DM-F PROFIsafe failsafe digital modules it is also possible to integrate the failsafe disconnection of motors in the SIMOCODE pro V motor management system.

All modules are connected by connection cables. The connection cables are available in various lengths. The maximum distance between the modules (e. g. between the basic unit and the current measuring module) must not exceed 2.5 m. For each system interface of the basic unit, the total length of all the connection cables may be up to 3 m.

Note:

SIMOCODE pro can also be found in the TIA Selection Tool. The various system components can therefore be conveniently selected. See http://www.siemens.com/tia-selection-tool.

SIMOCODE pro S and pro V: system structure

Article No. scheme

Note:

The article number scheme shows an overview of product versions for better understanding of the logic behind the article numbers. For your orders please use the article numbers quoted in the selection and ordering data.