The following are located on the TM41 Terminal Module:

• 4 bidirectional digital inputs/outputs
• 4 digital inputs (with electrical isolation)
• 1 analog input
• 1 interface for emulation of TTL incremental encoder (RS422)
• 1 LED for signaling zero mark detection for encoder interface
• 2 DRIVE‑CLiQ sockets
• 1 connection for the electronics power supply and to supply the digital outputs via the 24V DC power supply connector
• 1 PE connection

The status of the TM41 Terminal Module is indicated via a multi-color LED.
An LED next to the interface for TTL pulse encoder emulation is illuminated as soon as a zero mark is detected.

The TM41 Terminal Module can be snapped onto a TH 35 top-hat rail to EN 60715 (IEC 60715).

The signal cable shield can be attached to the TM41 Terminal Module via a shield connection terminal, e.g. type SK8 supplied by Phoenix Contact or type KLBГњ CO 1 supplied by WeidmГјller. The shield connection terminal must not be used as a strain relief mechanism.