Line voltages

380 ... 480 V 3 AC, ±10 % (-15 % <1 min)

500 вЂ¦ 690 V 3 AC, ±10 % (-15 % <1 min)

Line supply types

Grounded TN/TT systems and non-grounded IT systems

Line frequency

47 ... 63 Hz

Output frequency ¹⁾

• Control type Servo

0 ... 550 Hz

• Control type Vector

0 ... 550 Hz

• Control mode V/f

0 ... 550 Hz

Line power factor
Fundamental

• Basic Line Module

>0.96

• Active Line Module

Adjustable (factory-set to cos П† = 1)

Efficiency

• Basic Line Module

>99 %

• Active Line Module

>97.5 % (including Active Interface Module)

• Motor Module

>98.5 %

Overvoltage category

III acc. to EN 61800‑5‑1

Control method

Vector/Servo control with and without encoder or V/f control

Fixed speeds

15 fixed speeds plus 1 minimum speed, parameterizable (in the default setting, 3 fixed setpoints plus 1 minimum speed are selectable using terminal block/PROFIBUS/PROFINET)

Skippable speed ranges

4, parameterizable

Setpoint resolution

0.001 rpm digital (14 bits + sign)
12 bits analog

Braking operation

With Active Line Modules, four-quadrant operation as standard (energy recovery).
With Basic Line Modules, two-quadrant operation as standard,
braking by means of a Motor Module

Cabinet system

Cabinet system

Rittal TS 8, doors with double-barb lock, base plate with cable entry options

Paint finish

RAL 7035 (indoor requirements)

Mechanical specifications

Degree of protection

IP21 (higher degrees of protection up to IP55 optional)

Protection class

I acc. to EN 61800‑5‑1

Touch protection

EN 50274/DGUV regulation 3 when used as intended

Cooling method

Cooling in compliance with EN 60146:

Basic Line Connection Modules, Active Line Connection Modules, Motor Modules: WE
- W: Liquid cooling
- E: Forced air cooling, drive device outside the equipment

Line reactors, motor reactors, dv/dt filters with Voltage Peak Limiter: AN
- A: Air cooling
- N: Natural cooling (convection)

Ambient conditions

Storage ²⁾

Transport ²⁾

Operation

Ambient temperature

-25 ... +55 °C

-25 ... +70 °C
from -40 °C for 24 hours

0 ... +45 °C
to +50 °C see derating data

Relative humidity

(condensation not permissible)

5 ... 95 %
Class 1K4 acc. to IEC 60721‑3‑1

5 ... 95 % at 40 °C
Class 2K3 acc. to IEC 60721‑3‑2

5 ... 95 %
Class 3K3 acc. to IEC 60721‑3‑3

Environmental class/harmful chemical substances

Class 1C2
acc. to EN 60721‑3‑1

Class 2C2
acc. to EN 60721‑3‑2

Class 3C2
acc. to EN 60721‑3‑3

Organic/biological influences

Class 1B1
acc. to EN 60721‑3‑1

Class 2B1
acc. to EN 60721‑3‑2

Class 3B1
acc. to EN 60721‑3‑3

Degree of pollution

2 acc. to IEC/EN 61800‑5‑1

Installation altitude

≤ 2000 m above sea level without derating; > 2000 m see derating data

Mechanical stability

Storage ²⁾

Transport ²⁾

Operation

Vibratory load

Class 1M2
acc. to EN 60721‑3‑1

Class 2M2
acc. to EN 60721‑3‑2

–

• Deflection

1.5 mm at 5 ... 9 Hz

3.1 mm at 5 ... 9 Hz

0.075 mm at 10 ... 58 Hz

• Acceleration

5 m/sІ at >9 ... 200 Hz

10 m/sІ at >9 ... 200 Hz

9.8 m/sІ at >58 ... 200 Hz

Shock load

Class 1M2
acc. to EN 60721‑3‑1

Class 2M2
acc. to EN 60721‑3‑2

Class 3M4
acc. to EN 60721‑3‑3

• Acceleration

40 m/sІ at 22 ms

100 m/sІ at 11 ms

100 m/sІ at 11 ms

Compliance with standards

Conformances/certificates of suitability, according to

CE (EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and Machinery Directive 2006/42/EC for functional safety), RCM

Radio interference suppression

SINAMICS drive converter systems are not designed for connection to the public grid (first environment). Radio interference suppression is compliant with the EMC product standard for variable-speed drives EN 61800‑3, "second environment" (industrial networks). EMC disturbances can occur when connected to the public grid.

• System pressure with reference to atmospheric pressure, max.

600 kPa

• Inlet temperature of liquid coolant

Antifreeze essential for temperature range between 0 °C and 5 °C

• Degree of protection < IP55

0 ... 38 °C without derating
> 38 ... 43 °C, see derating data

• Degree of protection IP55

0 ... 33 °C without derating
> 33 ... 38 °C, see derating data

Coolant quality

• Electrical conductivity

< 2200 ОјS/cm

• pH value

7.5 ... 9

• Chloride ions

< 180 mg/l

• Sulfate ions

< 200 mg/l

• Orthophosphate

< 50 mg/l

• Dissolved iron

< 3 mg/l

• Dissolved copper

< 0.2 mg/l

• Biological load

< 50 CFU/ml

• SiO2 as silicic acid

< 47 mg/l

• Aluminum

< 2.65 mg/l

• Fluoride

< 4 mg/l

• Total hardness

< 20 (< 40 °C) °dH

• Size of entrained particles

≤ 0.5 mm

• SK 4.3 (upper limit value of polymer phosphates for untreated additional water)

< 10 mmol/l

• Permissible limit values for suspended particles in the coolant

No deposits of solid particles at ≥ 0.5 m/s

• System pressure with reference to atmospheric pressure, max.

600 kPa

• Pressure drop at rated volumetric flow

70 kPa

• Recommended pressure range

80 ... 150 kPa (applicable for water as coolant)

• Inlet temperature of liquid coolant

Depending on ambient temperature; no condensation permitted

Antifreeze essential for temperature range between 0 °C and 5 °C

• Degree of protection < IP55

0 ... 45 °C without derating
> 45 ... 50 °C, see derating data

• Degree of protection IP55

0 ... 40 °C without derating
> 40 ... 45 °C, see derating data

Coolant quality

• Coolant basis

Distilled, demineralized, completely desalinated water or deionized water with reduced electrical conductivity in acc. with ISO 3696, quality 3 or based on IEC 60993

• Electrical conductivity when filling

< 30 ОјS/cm (3 mS/m)

• pH value

5 ... 8

• Components that can be oxidized as oxygen content

< 30 mg/l

• Residue after vaporization and drying at 110 °C

< 10 mg/kg

Manufacturer

Clariant

Clariant

DOW

Chemical base

Ethylene glycol

Propylene glycol

Ethylene glycol

Minimum concentration

25 %

25 %

25 %

Antifreeze agent with minimum concentration

-10 °C

-10 °C

-10 °C

Maximum concentration

45 %

48 %

45 %

Antifreeze agent with maximum concentration

-30 °C

-30 °C

-30 °C

Inhibitor content

Contains inhibitors with nitrites

Contains inhibitors that are free of nitrates, amines, borates, and phosphate

Contains inhibitors that are free of nitrates, amines, and phosphate

Biocide action with a concentration of

> 25 %

> 25 %

> 25 %

Manufacturer

Clariant

Fuchs

Chemical base

Ethylene glycol

-

Minimum concentration

25 %

4 %

Maximum concentration

45 %

5 %

10 °C

< 0 °C

< 0 °C

< 0 °C

0.2 °C

2.7 °C

4.8 °C

6.7 °C

7.6 °C

8.4 °C

9.2 °C

10 °C

20 °C

< 0 °C

2 °C

6 °C

9.3 °C

12 °C

14.3 °C

16.4 °C

17.4 °C

18.3 °C

19.1 °C

20 °C

25 °C

0.6 °C

6.3 °C

10.5 °C

13.8 °C

16.7 °C

19.1 °C

21.2 °C

22.2 °C

23.2 °C

24.1 °C

24.9 °C

30 °C

4.7 °C

10.5 °C

14.9 °C

18.4 °C

21.3 °C

23.8 °C

26.1 °C

27.1 °C

28.1 °C

29 °C

29.9 °C

35 °C

8.7 °C

14.8 °C

19.3 °C

22.9 °C

26 °C

28.6 °C

30.9 °C

32 °C

33 °C

34 °C

34.9 °C

40 °C

12.8 °C

19.1 °C

23.7 °C

27.5 °C

30.6 °C

33.4 °C

35.8 °C

36.9 °C

37.9 °C

38.9 °C

39.9 °C

45 °C

16.8 °C

23.3 °C

28.2 °C

32 °C

35.3 °C

38.1 °C

40.6 °C

41.8 °C

42.9 °C

43.9 °C

44.9 °C

50 °C

20.8 °C

27.5 °C

32.6 °C

36.6 °C

40 °C

42.9 °C

45.5 °C

46.6 °C

47.8 °C

48.9 °C

49.9 °C