The SMC40 Sensor Module Cabinet-Mounted features the following connections and interfaces as standard:

• 2 encoder system interfaces
• 2 DRIVE‑CLiQ interfaces
• 1 connection for the electronics power supply via the 24 V DC supply connector
• 1 PE (protective earth) connection

The status of the SMC40 Sensor Module Cabinet-Mounted is indicated via a multi-color LED.

The SMC40 Sensor Module Cabinet-Mounted can be snapped onto a TH 35 standard mounting rail in accordance with EN 60715 (IEC 60715).

The maximum encoder cable length between SMC40 modules and encoder systems is 100 m (328 ft). The specified supply voltage of the encoder must be observed. The maximum cable length for DRIVE-CLiQ cables is 30 m (98 ft).

The signal cable shield can be connected to the SMC40 Sensor Module Cabinet‑Mounted via a shield connection terminal, e.g., Phoenix Contact type SK8 or WeidmГјller type KLBГњ CO 1. The shield connection terminal must not be used for strain relief.