SMC30 Sensor Module Cabinet-Mounted

The SMC30 Sensor Module Cabinet-Mounted is required to evaluate the encoder signals of motors without a DRIVE‑CLiQ interface. External encoders can also be connected via the SMC30.

The following encoder signals can be evaluated:

• Incremental encoders TTL/HTL with/without open-circuit detection (open-circuit detection is only available with bipolar signals)
• SSI encoder with TTL/HTL incremental signals
• SSI encoder without incremental signals

The motor temperature can also be sensed using a PTC thermistor KTY84‑130, Pt1000 or PTC.