Routine test under no-load conditions with the customer present

F71

Routine test with 1PS or 1MD motor (ordered with converter in package), under no-load conditions (without customer present)

F72

Routine test with 1PS or 1MD motor (ordered with converter in package), under no-load conditions with customer present

F73

Visual inspection and function test under rated load using test bay motor (without customer present)

F80

Visual inspection and function test under rated load using test bay motor with customer present

F81

Visual inspection and function test under rated load with 1PS or 1MD motor (ordered with converter in package) (without customer present)

F82

Visual inspection and function test under rated load with 1PS or 1MD motor (ordered with converter in package) with customer present

F83

Advanced visual inspection and function test under rated load with 1PS or 1MD motor (ordered with converter in package) (without customer present)

F84

Advanced visual inspection and function test under rated load with 1PS or 1MD motor (ordered with converter in package) with customer present

F85

Option description

• Check of the mechanical system and the touch protection
• Check for completeness
• Check of equipment (components)
• Check of cables
• Check of customer documentation
• Check of power supply
• Check of fans
• Check of equipment identifier
• Precharging test
• Function check of the converter control
• Function check of protective and monitoring devices (simulation)
• Function check of the customized control

вњ“

вњ“

вњ“

вњ“

вњ“

вњ“

вњ“

вњ“

вњ“

Measurement of shaft voltage, vibration and audible noises at no load on the motor

вњ“

вњ“

вњ“

вњ“

Measurement of the output of the converter (efficiency, power factor)

вњ“

вњ“

вњ“

вњ“

вњ“

вњ“

Measurement of the output at the motor (efficiency, power factor)

вњ“

вњ“

вњ“

вњ“

вњ“

вњ“

Harmonic analysis of line and motor current at the test bay motor

вњ“

вњ“

вњ“

вњ“

вњ“

вњ“

Warm-up at the drive's rated operating point

вњ“

вњ“

вњ“

вњ“

вњ“

вњ“

Temperature measurement on the converter

вњ“

вњ“

вњ“

вњ“

вњ“

вњ“

Temperature measurement on the motor

вњ“

вњ“

вњ“

вњ“

Temperature measurement on LOHER 1PS or 1MD motor

вњ“

вњ“

Special tests under full-load conditions:

• Single-phase interruption of the motor infeed
• Single-phase interruption of the converter infeed
• Ground fault at converter output

вњ“

вњ“

Special tests in no-load operation:

• Two-phase short-circuit at the motor terminals

вњ“

вњ“

Submission of the inspection report

вњ“

вњ“

вњ“

вњ“

вњ“

With customer present

вњ“

вњ“

вњ“

вњ“

вњ“