|
| | | | | |
The most important directives and standards are listed below. These are used as basis for the SINAMICSG180 compact units and they must be carefully observed to achieve an EMC-compliant configuration that is safe both functionally and in operation. Standards for compact unitsEuropean directives |
|---|
2006/95/EC | Low-voltage directive:
Legal guidelines of the EU member states concerning electrical equipment for use within specified voltage limits | 2004/108/EC | EMC Directive:
Legal guidelines of the EU member states for electromagnetic compatibility | International and European standards | EN 954-1 | Safety of machinery Safety-related parts of control systems;
Part 1: General design principles | ENISO13849‑1 | Safety of machinery Safety-related parts of control systems;
Part 1: General design principles (ENISO 13849-1:2006 (replaced EN 954-1) | EN60146‑1‑1 | Semiconductor converters General requirements and line-commutated converters
Part 1-1: Specification of basic requirements | EN60204‑1 | Electrical equipment of machines
Part1: General definitions | EN 60529 | Degrees of protection provided by enclosures (IP code) | EN 61140 | Protection against electric shock - Common aspects for installation and equipment | EN61508‑1 | Functional safety of electrical/electronic/programmable electronic safety-related systems,
Part1: General requirements | EN61800‑2 | Adjustable speed electrical power drive systems,
Part 2: General requirements Rating specifications for low-voltage adjustable frequency AC power drive systems | EN61800‑3 | Adjustable speed electrical power drive systems,
Part 3: EMC requirements and specific test methods | EN 61800-5-1 | Adjustable speed electrical power drive systems,
Part 5-1: Safety requirements -
Electrical, thermal and energy requirements | EN61800‑5‑2 | Adjustable speed electrical power drive systems,
Part 5-2: Safety requirements -
Functional safety (IEC 61800-5-2:2007) | North American standards | UL508C1) | Power conversion equipment | Approvals | TÜV NRTL US1) | Nationally Recognized Testing Laboratory |
1) On request General technical dataElectrical data |
|---|
| Line voltages | Type of supply system | Power ranges | 230...400...500V3 AC, -15/+10% | TN/TT system | 2.2...160kW(at 400V) | 230...500V3 AC, -15/+10% | IT system | 2.2...200kW(at 500 V) | 230...690V3 AC, -15/+10% | TN/TT or IT system | 7.5...200kW(at 690 V) | Line frequency | 47...63 Hz | Output frequency | 0...250 Hz | Voltage rise in motor | Typ. 500...1000V/μs, but <1500V/μs | Typical line harmonics (I) in % of fundamental mode for the 5/7/11/13/17/19/23/25 harmonics max. | 38/18/8/7/5/4/3/2 | Typical line harmonics (I) in % of fundamental mode for the 5/7/11/13/17/19/23/25 harmonics max. with LHF filter | 1.4/3.6/2.4/1.7/1.0/0.6/0.8/0.4 | Pulse number | 6 | Overvoltage category | III to EN61800‑5‑1 | Short Circuit Current Rating (SCCR) according to UL508C (up to 600 V), in conjunction with the specified fuses or circuit breakers | 60kA | Control method | - For motors: Field-oriented control (FOC) with sensor and approval for explosion-proof motors as well as vector control (SVC) with/without sensor (speed, process speed (n), torque, hoist1), line synchronization1))
- Motor-independent control of current or voltage (current, process current (I), voltage, process voltage (U))
| Fixed speeds | 3 fixed speeds + 1 minimum speed, parameterizable | Skipped speed ranges | 2, parameterizable | Setpoint resolution | 13 bits digital with n/f setpoint, 12bits digital with U/I torque setpoint, 9bits + sign analog | Braking operation | The oversaturation control system makes it possible to generate a braking torque of up to 50 % at low to mid-range speeds, and of up to 10 % at high speeds. If a higher braking torque is required, an optionally available braking module with appropriate braking resistor must be installed. | Mechanical data | Degree of protection | IP20, optionally IP21 provided by protective top cover (aluminum, unpainted) | Protection class | I acc. to EN61800‑5‑1 | Touch protection | EN 50274 / BGV A3 | Type of cooling | Forced air cooling AF to EN 60146 | Paint finish | RAL9023 (R-Pearl Dark Grey) | Cable entry | From below | Ambient conditions2) | Storage 3) | Transport 3) | Operation | Ambient temperature | -25...+70C
Class 1K4 acc. to EN 60721-3-1 | -25...+70C
down to -40C for 24h
Class 2K3 acc. to EN60721‑3‑2 | Air: 0...40C/
| Relative humidity
(condensation not permissible) | 5...95%
Class 1K3 acc. to EN60721‑3‑1 | 5...95%
Class 2K3 acc. to EN60721‑3‑2 | 5...95%
Class 3K3 acc. to EN60721‑3‑3 | Environmental class/harmful
chemical substances | Class 1C2 acc. to EN60721‑3‑1 | Class 2C2 acc. to EN60721‑3‑2 | Class 3C2 acc. to EN60721‑3‑3 | Organic/biological influences | Class 1B1 acc. to EN60721‑3‑1 | Class 2B1 acc. to EN60721‑3‑2 | Class 3B1 acc. to EN60721‑3‑3 | Pollution degree | 2 acc. to EN61800‑5‑1 | Installation altitude | Up to 1000m above sea level without derating, >1000m see derating table (in chapter Configuring instructions) | Mechanical stability2) | Storage 3) | Transport 3) | Operation | Vibratory load | 1.5 mm at 5 ... 9 Hz 5m/s2 at >9...200Hz Class 1M2 acc. to EN60721‑3‑1 | 3.1mmat5...9Hz 10 m/s2 at >9...200Hz Class 2M2 acc. to EN60721‑3‑2 | 0.075mmat10…58Hz 10m/s2 at >58…200Hz - | Shock load | 40 m/s2 at 22ms Class 1M2 acc. to EN60721‑3‑1 | 100 m/s2 at 11ms Class 2M2 acc. to EN60721‑3‑2 | 100 m/s2 at 11ms Class 3M4 acc. to EN60721‑3‑3 | Compliance with standards | CE Label | Acc. to EMC Directive No. 2004/108/EC and Low-Voltage Directive No. 2006/95/EC | Radio interference suppression | Complies with EMC guidelines defined in EN61800‑3 thanks to line filter which is integrated as standard (with grounded supply system): - Category C2 for compact units in TN/TT system of the first environment (residential area), category C1 available as an option
- Category C4 for compact units in IT system of the second environment (industrial area)
| Approvals | TÜV NRTL US2) |
1) On request 2) Higher standards on request 3) In transport packaging Deviations from the specified classes are underlined. 400V, 6‑pulseLine voltage, supply system type | | 230...500V3AC, TT/TN |
|---|
SINAMICS G180
compact units | | 6SE0100‑1AC15‑5❑A7 | 6SE0100‑1AC17‑0❑A7 | 6SE0100‑1AC21‑0❑A7 | 6SE0100‑1AC21‑3❑A7 | 6SE0100‑1AC21‑8❑A7 | Converter type | | 2T2A‑07400‑002 | 2T2A‑07400‑003 | 2T2A‑07400‑004 | 2T2A‑07400‑005 | 2T2A‑07400‑007 | Electrical data at motor end | Type rating 1) | | | | | | | | kW | 2.2 | 3 | 4 | 5.5 | 7.5 | | hp | 3 | 5 | 6 | 9 | 12 | Output voltage2) | V | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | Output current | | | | | | | | A | 5.5 | 7 | 9.5 | 13 | 18 | - Short-time current
(60s every 10minutes) max.
| A | 6.5 | 8 | 11 | 15 | 20 | Overload capability
(60s every 10minutes) max. | % | 18 | 14 | 16 | 15 | 11 | Output power | kVA | 3.8 | 4.8 | 6.6 | 9 | 12.5 | Output frequency, max. | Hz | 250 | 250 | 250 | 250 | 250 | Rated clock cycle | kHz | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | adjustable from | kHz | 3...7.5 | 3...7.5 | 3...7.5 | 3...7.5 | 3...7.5 | Power loss 3) | kW | 0.13 | 0.16 | 0.2 | 0.26 | 0.33 | Rated efficiency | % | 95.2 | 95.8 | 95.9 | 96 | 96.2 | Electrical data at line end | Connected load | kVA | 3.7 | 4.5 | 6.2 | 8.5 | 12 | Rated input voltage | V | 400 | 400 | 400 | 400 | 400 | Input current | | | | | | | | A | 5.3 | 6.5 | 8.9 | 12.2 | 17.3 | - Short-time line current (60s) max.
| A | 6.3 | 7.4 | 10 | 14 | 19 | Line fuse (provided by customer) | gL(A) | 6…16 | 10...16 | 10...16 | 16 | 20...32 | λline | | 0.927 | 0.94 | 0.918 | 0.937 | 0.918 | Cosφline | | 1 | 1 | 1 | 1 | 1 | Radio interference suppression acc. to
EN61800‑3 | | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | Mechanical data | Coolant requirements | m3/h | 45 | 45 | 90 | 90 | 90 | Sound pressure level LpA | | | | | | | (1 m) at 50/60 Hz | dB | 60 | 60 | 60 | 60 | 60 | Max. cable length between converter and motor with standard insulation | | | | | | | - on systems ≤400V (shielded)
| m | 200/3504) | 200/3504) | 200/3504) | 200/3504) | 200/3504) | - on systems >400V (shielded)
| m | 150/3004) | 150/3004) | 150/3004) | 150/3004) | 150/3004) | Line/load connection | | | | | | | L1, L2, L3/U2, V2, W2 | | | | | | | For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions" | | | | | | | | | | | | | | Dimensions | | | | | | | | mm | 165 | 165 | 165 | 165 | 165 | - Height
(without mounting brackets)
| mm | 410 | 410 | 410 | 410 | 510 | | mm | 320 | 320 | 320 | 320 | 320 | Weight, approx. | kg | 11.5 | 11.5 | 11.5 | 11.5 | 16.5 | Approvals, according to | | NRTL5) | NRTL5) | NRTL5) | NRTL5) | NRTL5) | Frame size | | K1 | K1 | K1 | K1 | K2 |
1)Rated power of a typical 2- to 6-pole standard motor. 2) Typical output voltage dependent on filter and unit type. 3) Maximum power loss with continuous current. 4) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is integrated in unit). 5) On request Line voltage, supply system type | | 230...500V3AC, TT/TN |
|---|
SINAMICS G180
compact units | | 6SE0100‑1AC22‑5❑A7 | 6SE0100‑1AC23‑7❑A7 | 6SE0100‑1AC24‑8❑A7 | 6SE0100‑1AC25‑8❑A7 | 6SE0100‑1AC27‑8❑A7 | Converter type | | 2T2A‑07400‑011 | 2T2A‑07400‑015 | 2T2A‑07400‑022 | 2T2A‑07400‑030 | 2T2A‑07400‑037 | Electrical data at motor end | Type rating 1) | | | | | | | | kW | 11 | 15 | 22 | 30 | 37 | | hp | 17 | 23 | 34 | 46 | 57 | Output voltage2) | V | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | Output current | | | | | | | | A | 24.5 | 37 | 48 | 58 | 78 | - Short-time current
(60s every 10minutes) max.
| A | 27 | 44 | 54 | 63 | 88 | Overload capability
(60s every 10minutes) max. | % | 10 | 19 | 13 | 9 | 13 | Output power | kVA | 17 | 25.6 | 33.3 | 40.2 | 54 | Output frequency, max. | Hz | 250 | 250 | 250 | 250 | 250 | Rated clock cycle | kHz | 4.5 | 4.5 | 4.5 | 4.5 | 3 | adjustable from | kHz | 3...7.5 | 3...7.5 | 3...7.5 | 3...7.5 | 2...5 | Power loss 3) | kW | 0.47 | 0.6 | 0.84 | 1.1 | 1.35 | Rated efficiency | % | 96.3 | 96.5 | 96.6 | 96.7 | 96.7 | Electrical data at line end | Connected load | kVA | 15.7 | 24.3 | 31.8 | 39.1 | 52.2 | Rated input voltage | V | 400 | 400 | 400 | 400 | 400 | Input current | | | | | | | | A | 22.7 | 35.1 | 45.9 | 56.5 | 75.3 | - Short-time line current (60s) max.
| A | 25 | 42 | 52 | 61 | 85 | Line fuse (provided by customer) | gL(A) | 25...32 | 40...80 | 50...80 | 63…80 | 80...100 | λline | | 0.932 | 0.932 | 0.932 | 0.924 | 0.932 | Cosφline | | 1 | 1 | 1 | 1 | 1 | Radio interference suppression acc. to
EN61800‑3 | | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | Mechanical data | Coolant requirements | m3/h | 130 | 280 | 280 | 280 | 750 | Sound pressure level LpA | | | | | | | (1 m) at 50/60 Hz | dB | 60 | 60 | 60 | 60 | 62 | Max. cable length between converter and motor with standard insulation | | | | | | | - on systems ≤400V (shielded)
| m | 200/3504) | 200/3504) | 200/3504) | 200/3504) | 200/3504) | - on systems >400V (shielded)
| m | 150/3004) | 150/3004) | 150/3004) | 150/3004) | 150/3004) | Line/load connection | | | | | | | L1, L2, L3/U2, V2, W2 | | | | | | | For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions" | | | | | | | Dimensions | | | | | | | | mm | 165 | 225 | 225 | 225 | 350 | - Height
(without mounting brackets)
| mm | 510 | 610 | 610 | 610 | 710 | | mm | 320 | 320 | 320 | 320 | 320 | Weight, approx. | kg | 16.5 | 30 | 31 | 31 | 51 | Approvals, according to | | NRTL5) | NRTL5) | NRTL5) | NRTL5) | NRTL5) | Frame size | | K2 | K3 | K3 | K3 | K4 |
1)Rated power of a typical 2- to 6-pole standard motor. 2) Typical output voltage dependent on filter and unit type. 3) Maximum power loss with continuous current. 4) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is integrated in unit). 5) On request Line voltage, supply system type | | 230...500V3AC, TT/TN |
|---|
SINAMICS G180
compact units | | 6SE0100‑1AC28‑8❑A7 | 6SE0100‑1AC31‑1❑A7 | 6SE0100‑1AC31‑5❑A7 | 6SE0100‑1AC31‑8❑A7 | 6SE0100‑1AC32‑1❑A7 | Converter type | | 2T2A‑07400‑045 | 2T2A‑07400‑055 | 2T2A‑07400‑075 | 2T2A‑07400‑090 | 2T2A‑07400‑110 | Electrical data at motor end | Type rating 1) | | | | | | | | kW | 45 | 55 | 75 | 90 | 110 | | hp | 69 | 85 | 116 | 139 | 170 | Output voltage2) | V | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | Output current | | | | | | | | A | 88 | 110 | 145 | 175 | 205 | - Short-time current
(60s every 10minutes) max.
| A | 110 | 126 | 165 | 204 | 240 | Overload capability
(60s every 10minutes) max. | % | 25 | 15 | 14 | 17 | 17 | Output power | kVA | 61 | 76.2 | 100 | 121 | 142 | Output frequency, max. | Hz | 250 | 250 | 250 | 250 | 250 | Rated clock cycle | kHz | 3 | 3 | 3 | 3 | 3 | adjustable from | kHz | 2...5 | 2...5 | 2...5 | 2...5 | 2...5 | Power loss 3) | kW | 1.59 | 1.86 | 2.37 | 2.83 | 3.33 | Rated efficiency | % | 96.8 | 96.9 | 97.1 | 97.1 | 97.2 | Electrical data at line end | Connected load | kVA | 57.3 | 74.8 | 97.7 | 119 | 134 | Rated input voltage | V | 400 | 400 | 400 | 400 | 400 | Input current | | | | | | | | A | 82.7 | 108 | 141 | 172 | 194 | - Short-time line current (60s) max.
| A | 103 | 124 | 160 | 200 | 227 | Line fuse (provided by customer) | gL(A) | 100 | 125 | 160 | 200 | 200...250 | λline | | 0.924 | 0.929 | 0.929 | 0.924 | 0.924 | Cosφline | | 1 | 1 | 1 | 1 | 1 | Radio interference suppression acc. to
EN61800‑3 | | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | Mechanical data | Coolant requirements | m3/h | 750 | 750 | 1050 | 1050 | 1050 | Sound pressure level LpA | | | | | | | (1 m) at 50/60 Hz | dB | 62 | 62 | 64 | 64 | 64 | Max. cable length between converter and motor with standard insulation | | | | | | | - on systems ≤400V (shielded)
| m | 200/3504) | 200/3504) | 200/3504) | 200/3504) | 200/3504) | - on systems >400V (shielded)
| m | 150/3004) | 150/3004) | 150/3004) | 150/3004) | 150/3004) | Line/load connection | | | | | | | L1, L2, L3/U2, V2, W2 | | | | | | | For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions" | | | | | | | Dimensions | | | | | | | | mm | 350 | 350 | 350 | 350 | 350 | - Height
(without mounting brackets)
| mm | 710 | 710 | 1060 | 1060 | 1060 | | mm | 320 | 320 | 320 | 320 | 320 | Weight, approx. | kg | 53 | 55 | 90 | 94 | 96 | Approvals, according to | | NRTL5) | NRTL5) | NRTL5) | NRTL5) | NRTL5) | Frame size | | K4 | K4 | K5 | K5 | K5 |
1)Rated power of a typical 2- to 6-pole standard motor. 2) Typical output voltage dependent on filter and unit type. 3) Maximum power loss with continuous current. 4) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is integrated in unit). 5) On request Line voltage, supply system type | | 230...500V3AC, TT/TN |
|---|
SINAMICS G180
compact units | | 6SE0100‑1AC32‑5❑A7 | 6SE0100‑1AC33‑0❑A7 | | | | Converter type | | 2T2A‑07400‑132 | 2T2A‑07400‑160 | | | | Electrical data at motor end | Type rating 1) | | | | | | | | kW | 132 | 160 | | | | | hp | 204 | 247 | | | | Output voltage2) | V | 0...0.98×Vline | 0...0.98×Vline | | | | Output current | | | | | | | | A | 245 | 295 | | | | - Short-time current
(60s every 10minutes) max.
| A | 300 | 360 | | | | Overload capability
(60s every 10minutes) max. | % | 22 | 22 | | | | Output power | kVA | 170 | 204 | | | | Output frequency, max. | Hz | 250 | 250 | | | | Rated clock cycle | kHz | 3 | 3 | | | | adjustable from | kHz | 2...5 | 2...5 | | | | Power loss 3) | kW | 3.84 | 4.65 | | | | Rated efficiency | % | 97.3 | 97.3 | | | | Electrical data at line end | Connected load | kVA | 161 | 197 | | | | Rated input voltage | V | 400 | 400 | | | | Input current | | | | | | | | A | 232 | 284 | | | | - Short-time line current (60s) max.
| A | 284 | 347 | | | | Line fuse (provided by customer) | gL(A) | 250...315 | 315...400 | | | | λline | | 0.924 | 0.924 | | | | Cosφline | | 1 | 1 | | | | Radio interference suppression acc. to
EN61800‑3 | | C2 (class A filter) | C2 (class A filter) | | | | Mechanical data | Coolant requirements | m3/h | 1600 | 1600 | | | | Sound pressure level LpA | | | | | | | (1 m) at 50/60 Hz | dB | 66 | 66 | | | | Max. cable length between converter and motor with standard insulation | | | | | | | - on systems ≤400V (shielded)
| m | 200/3504) | 200/3504) | | | | - on systems >400V (shielded)
| m | 150/3004) | 150/3004) | | | | Line/load connection | | | | | | | L1, L2, L3/U2, V2, W2 | | | | | | | For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions" | | | | | | | Dimensions | | | | | | | | mm | 500 | 500 | | | | - Height
(without mounting brackets)
| mm | 1060 | 1060 | | | | | mm | 320 | 320 | | | | Weight, approx. | kg | 160 | 170 | | | | Approvals, according to | | NRTL5) | NRTL5) | | | | Frame size | | K6 | K6 | | | |
1)Rated power of a typical 2- to 6-pole standard motor. 2) Typical output voltage dependent on filter and unit type. 3) Maximum power loss with continuous current. 4) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is integrated in unit). 5) On request 500 V, 6‑pulseLine voltage, supply system type | | 230...500V3AC, IT |
|---|
SINAMICS G180
compact units | | 6SE0100‑1AD14‑5❑A7 | 6SE0100‑1AD15‑5❑A7 | 6SE0100‑1AD17‑0❑A7 | 6SE0100‑1AD21‑0❑A7 | 6SE0100‑1AD21‑3❑A7 | Converter type | | 2T2A‑07500‑002 | 2T2A‑07500‑003 | 2T2A‑07500‑004 | 2T2A‑07500‑005 | 2T2A‑07500‑007 | Electrical data at motor end | Type rating 1) | | | | | | | | kW | 2.2 | 3 | 4 | 5.5 | 7.5 | | hp | 3 | 4 | 5 | 7 | 9 | Output voltage2) | V | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | Output current | | | | | | | | A | 4.5 | 5.5 | 7 | 9.5 | 13 | - Short-time current
(60s every 10minutes) max.
| A | 5 | 6.5 | 8 | 11 | 15 | Overload capability
(60s every 10minutes) max. | % | 11 | 18 | 14 | 16 | 15 | Output power | kVA | 3.9 | 4.8 | 6.1 | 8.2 | 11.3 | Output frequency, max. | Hz | 250 | 250 | 250 | 250 | 250 | Rated clock cycle | kHz | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | adjustable from | kHz | 3...7.5 | 3...7.5 | 3...7.5 | 3...7.5 | 3...7.5 | Power loss 3) | kW | 0.12 | 0.16 | 0.2 | 0.26 | 0.34 | Rated efficiency | % | 95.6 | 95.7 | 95.9 | 96.0 | 96.1 | Electrical data at line end | Connected load | kVA | 3.7 | 4.6 | 6.4 | 8.6 | 12.1 | Rated input voltage | V | 500 | 500 | 500 | 500 | 500 | Input current | | | | | | | | A | 4.4 | 5.2 | 6.5 | 9.3 | 12.5 | - Short-time line current (60s) max.
| A | 4.9 | 6.1 | 7.4 | 11 | 14 | Line fuse (provided by customer) | gL(A) | 4...16 | 6...16 | 10...16 | 10...16 | 16 | λline | | 0.902 | 0.912 | 0.932 | 0.908 | 0.927 | Cosφline | | 1 | 1 | 1 | 1 | 1 | Radio interference suppression acc. to
EN61800‑3 | | C4 | C4 | C4 | C4 | C4 | Mechanical data | Coolant requirements | m3/h | 45 | 45 | 45 | 90 | 90 | Sound pressure level LpA | | | | | | | (1 m) at 50/60 Hz | dB | 60 | 60 | 60 | 60 | 60 | Max. cable length between converter and motor with standard insulation | | | | | | | | m | 3004) | 3004) | 3004) | 3004) | 3004) | Line/load connection | | | | | | | L1, L2, L3/U2, V2, W2 | | | | | | | For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions" | | | | | | | Dimensions | | | | | | | | mm | 165 | 165 | 165 | 165 | 165 | - Height
(without mounting brackets)
| mm | 410 | 410 | 410 | 410 | 410 | | mm | 320 | 320 | 320 | 320 | 320 | Weight, approx. | kg | 11.5 | 11.5 | 11.5 | 11.5 | 11.5 | Approvals, according to | | NRTL5) | NRTL5) | NRTL5) | NRTL5) | NRTL5) | Frame size | | K1 | K1 | K1 | K1 | K1 |
1)Rated power of a typical 2- to 6-pole standard motor. 2) Typical output voltage dependent on filter and unit type. 3) Maximum power loss with continuous current. 4) Option L10 included (strengthened dv/dt filter; strengthened filter is integrated in unit). 5) On request Line voltage, supply system type | | 230...500V3AC, IT |
|---|
SINAMICS G180
compact units | | 6SE0100‑1AD21‑8❑A7 | 6SE0100‑1AD22‑5❑A7 | 6SE0100‑1AD23‑7❑A7 | 6SE0100‑1AD24‑8❑A7 | 6SE0100‑1AD25‑8❑A7 | Converter type | | 2T2A‑07500‑011 | 2T2A‑07500‑015 | 2T2A‑07500‑022 | 2T2A‑07500‑030 | 2T2A‑07500‑037 | Electrical data at motor end | Type rating 1) | | | | | | | | kW | 11 | 15 | 22 | 30 | 37 | | hp | 17 | 23 | 34 | 46 | 57 | Output voltage2) | V | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98× Vline | Output current | | | | | | | | A | 18 | 24.5 | 37 | 48 | 58 | - Short-time current
(60s every 10minutes) max.
| A | 20 | 27 | 44 | 54 | 63 | Overload capability
(60s every 10minutes) max. | % | 11 | 10 | 19 | 13 | 9 | Output power | kVA | 15.6 | 21.2 | 32 | 41.6 | 50.2 | Output frequency, max. | Hz | 250 | 250 | 250 | 250 | 250 | Rated clock cycle | kHz | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | adjustable from | kHz | 3...7.5 | 3...7.5 | 3...7.5 | 3...7.5 | 3...7.5 | Power loss 3) | kW | 0.48 | 0.63 | 0.89 | 1.17 | 1.35 | Rated efficiency | % | 96.2 | 96.3 | 96.4 | 96.5 | 96.7 | Electrical data at line end | Connected load | kVA | 16 | 24.4 | 32 | 39.2 | 52.3 | Rated input voltage | V | 500 | 500 | 500 | 500 | 500 | Input current | | | | | | | | A | 17.4 | 23.4 | 35.8 | 46.8 | 57.1 | - Short-time line current (60s) max.
| A | 19 | 26 | 43 | 53 | 62 | Line fuse (provided by customer) | gL(A) | 20...32 | 25...32 | 40...80 | 50...80 | 63...80 | λline | | 0.902 | 0.924 | 0.918 | 0.924 | 0.912 | Cosφline | | 1 | 1 | 1 | 1 | 1 | Radio interference suppression acc. to
EN61800‑3 | | C4 | C4 | C4 | C4 | C4 | Mechanical data | Coolant requirements | m3/h | 90 | 130 | 280 | 280 | 280 | Sound pressure level LpA | | | | | | | (1 m) at 50/60 Hz | dB | 60 | 60 | 60 | 60 | 62 | Max. cable length between converter and motor with standard insulation | | | | | | | | m | 3004) | 3004) | 3004) | 3004) | 3004) | Line/load connection | | | | | | | L1, L2, L3/U2, V2, W2 | | | | | | | For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions" | | | | | | | Dimensions | | | | | | | | mm | 165 | 165 | 225 | 225 | 225 | - Height
(without mounting brackets)
| mm | 510 | 510 | 610 | 610 | 610 | | mm | 320 | 320 | 320 | 320 | 320 | Weight, approx. | kg | 16.5 | 17.5 | 30 | 32 | 32 | Approvals, according to | | NRTL5) | NRTL5) | NRTL5) | NRTL5) | NRTL5) | Frame size | | K2 | K2 | K3 | K3 | K3 |
1)Rated power of a typical 2- to 6-pole standard motor. 2) Typical output voltage dependent on filter and unit type. 3) Maximum power loss with continuous current. 4) Option L10 included (strengthened dv/dt filter; strengthened filter is integrated in unit). 5) On request Line voltage, supply system type | | 230...500V3AC, IT |
|---|
SINAMICS G180
compact units | | 6SE0100‑1AD27‑8❑A7 | 6SE0100‑1AD28‑8❑A7 | 6SE0100‑1AD31‑1❑A7 | 6SE0100‑1AD31‑5❑A7 | 6SE0100‑1AD31‑8❑A7 | Converter type | | 2T2A‑07500‑045 | 2T2A‑07500‑055 | 2T2A‑07500‑075 | 2T2A‑07500‑090 | 2T2A‑07500‑110 | Electrical data at motor end | Type rating 1) | | | | | | | | kW | 45 | 55 | 75 | 90 | 110 | | hp | 56 | 68 | 93 | 111 | 136 | Output voltage2) | V | 0...0.98×Vline | 0...0.98× Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | Output current | | | | | | | | A | 78 | 88 | 110 | 145 | 175 | - Short-time current
(60s every 10minutes) max.
| A | 88 | 110 | 126 | 165 | 204 | Overload capability
(60s every 10minutes) max. | % | 13 | 25 | 15 | 14 | 17 | Output power | kVA | 67.5 | 76.2 | 95.3 | 126 | 152 | Output frequency, max. | Hz | 250 | 250 | 250 | 250 | 250 | Rated clock cycle | kHz | 3 | 3 | 3 | 3 | 3 | adjustable from | kHz | 2...5 | 2...5 | 2...5 | 20...5 | 2...5 | Power loss 3) | kW | 1.59 | 1.8 | 2.37 | 2.83 | 3.33 | Rated efficiency | % | 96.8 | 97.0 | 97.1 | 97.1 | 97.2 | Electrical data at line end | Connected load | kVA | 57.5 | 74.8 | 98.4 | 119 | 136 | Rated input voltage | V | 500 | 500 | 500 | 500 | 500 | Input current | | | | | | | | A | 73.7 | 87.6 | 109 | 143 | 170 | - Short-time line current (60s) max.
| A | 83 | 110 | 125 | 163 | 198 | Line fuse (provided by customer) | gL(A) | 80...100 | 100 | 125 | 160 | 200 | λline | | 0.918 | 0.912 | 0.918 | 0.918 | 0.908 | Cosφline | | 1 | 1 | 1 | 1 | 1 | Radio interference suppression acc. to
EN61800‑3 | | C4 | C4 | C4 | C4 | C4 | Mechanical data | Coolant requirements | m3/h | 750 | 750 | 750 | 1050 | 1050 | Sound pressure level LpA | | | | | | | (1 m) at 50/60 Hz | dB | 62 | 62 | 64 | 64 | 64 | Max. cable length between converter and motor with standard insulation | | | | | | | | m | 3004) | 3004) | 3004) | 3004) | 3004) | Line/load connection | | | | | | | L1, L2, L3/U2, V2, W2 | | | | | | | For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions" | | | | | | | Dimensions | | | | | | | | mm | 350 | 350 | 350 | 350 | 350 | - Height
(without mounting brackets)
| mm | 710 | 710 | 710 | 1060 | 1060 | | mm | 320 | 320 | 320 | 320 | 320 | Weight, approx. | kg | 51 | 53 | 55 | 90 | 94 | Approvals, according to | | NRTL5) | NRTL5) | NRTL5) | NRTL5) | NRTL5) | Frame size | | K4 | K4 | K4 | K5 | K5 |
1)Rated power of a typical 2- to 6-pole standard motor. 2) Typical output voltage dependent on filter and unit type. 3) Maximum power loss with continuous current. 4) Option L10 included (strengthened dv/dt filter; strengthened filter is integrated in unit). 5) On request Line voltage, supply system type | | 230...500V3AC, IT |
|---|
SINAMICS G180
compact units | | 6SE0100‑1AD32‑1❑A7 | 6SE0100‑1AD32‑5❑A7 | 6SE0100‑1AD33‑0❑A7 | | | Converter type | | 2T2A‑07500‑132 | 2T2A‑07500‑160 | 2T2A‑07500‑200 | | | Electrical data at motor end | Type rating 1) | | | | | | | | kW | 132 | 160 | 200 | | | | hp | 163 | 197 | 247 | | | Output voltage2) | V | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | | | Output current | | | | | | | | A | 205 | 245 | 295 | | | - Short-time current
(60s every 10minutes) max.
| A | 240 | 300 | 360 | | | Overload capability
(60s every 10minutes) max. | % | 17 | 22 | 22 | | | Output power | kVA | 178 | 212 | 256 | | | Output frequency, max. | Hz | 250 | 250 | 250 | | | Rated clock cycle | kHz | 3 | 3 | 3 | | | adjustable from | kHz | 2...5 | 2...5 | 2...5 | | | Power loss 3) | kW | 3.84 | 4.48 | 5.6 | | | Rated efficiency | % | 97.3 | 97.4 | 97.4 | | | Electrical data at line end | Connected load | kVA | 161 | 197 | 3.8 | | | Rated input voltage | V | 500 | 500 | 500 | | | Input current | | | | | | | | A | 196 | 237 | 286 | | | - Short-time line current (60s) max.
| A | 230 | 290 | 349 | | | Line fuse (provided by customer) | gL(A) | 200...250 | 250...315 | 315...400 | | | λline | | 0.912 | 0.912 | 0.912 | | | Cosφline | | 1 | 1 | 1 | | | Radio interference suppression acc. to
EN61800‑3 | | C4 | C4 | C4 | | | Mechanical data | Coolant requirements | m3/h | 1050 | 1600 | 1600 | | | Sound pressure level LpA | | | | | | | (1 m) at 50/60 Hz | dB | 66 | 66 | 60 | | | Max. cable length between converter and motor with standard insulation | | | | | | | | m | 3004) | 3004) | 3004) | | | Line/load connection | | | | | | | L1, L2, L3/U2, V2, W2 | | | | | | | For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions" | | | | | | | Dimensions | | | | | | | | mm | 350 | 500 | 500 | | | - Height
(without mounting brackets)
| mm | 1060 | 1060 | 1060 | | | | mm | 320 | 320 | 320 | | | Weight, approx. | kg | 96 | 170 | 180 | | | Approvals, according to | | NRTL5) | NRTL5) | NRTL5) | | | Frame size | | K5 | K6 | K6 | | |
1)Rated power of a typical 2- to 6-pole standard motor. 2) Typical output voltage dependent on filter and unit type. 3) Maximum power loss with continuous current. 4) Option L10 included (strengthened dv/dt filter; strengthened filter is integrated in unit). 5) On request 690 V, 6‑pulseLine voltage, supply system type | | 230...690 V3AC, TT/TN or IT |
|---|
SINAMICS G180
compact units | | 6SE0100‑1A❑21‑0❑A7 | 6SE0100‑1A❑21‑3❑A7 | 6SE0100‑1A❑21‑8❑A7 | 6SE0100‑1A❑22‑5❑A7 | 6SE0100‑1A❑23‑4❑A7 | Converter type | | 2T2A‑07600‑007 | 2T2A‑07600‑011 | 2T2A‑07600‑015 | 2T2A‑07600‑022 | 2T2A‑07600‑030 | Electrical data at motor end | Type rating 1) | | | | | | | | kW | 7.5 | 11 | 15 | 22 | 30 | | hp | 8 | 12 | 17 | 25 | 34 | Output voltage2) | V | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | Output current | | | | | | | | A | 9.5 | 13 | 18 | 27 | 36 | - Short-time current
(60s every 10minutes) max.
| A | 11 | 16 | 21 | 33 | 45 | Overload capability
(60s every 10minutes) max. | % | 16 | 23 | 17 | 22 | 25 | Output power | kVA | 11.4 | 15.5 | 21.5 | 32.3 | 43 | Output frequency, max. | Hz | 250 | 250 | 250 | 250 | 250 | Rated clock cycle | kHz | 3 | 3 | 3 | 3 | 3 | adjustable from | kHz | 2...5 | 2...5 | 2...5 | 2...5 | 2...5 | Power loss 3) | kW | 0.29 | 0.4 | 0.55 | 0.74 | 1 | Rated efficiency | % | 96.7 | 96.8 | 96.8 | 97.0 | 97.0 | Electrical data at line end | Connected load | kVA | 3.7 | 4.6 | 6.4 | 8.6 | 12.1 | Rated input voltage | V | 690 | 690 | 690 | 690 | 690 | Input current | | | | | | | | A | 8.8 | 11.8 | 16.8 | 25.3 | 37.3 | - Short-time line current (60s) max.
| A | 10 | 14 | 20 | 31 | 47 | Line fuse (provided by customer) | gL(A) | 10...32 | 16...32 | 20...32 | 32 | 40...63 | λline | | 0.94 | 0.948 | 0.94 | 0.948 | 0.867 | Cosφline | | 1 | 1 | 1 | 1 | 1 | Radio interference suppression acc. to
EN61800‑34) | | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | Mechanical data | Coolant requirements | m3/h | 90 | 90 | 130 | 130 | 750 | Sound pressure level LpA | | | | | | | (1 m) at 50/60 Hz | dB | 60 | 60 | 60 | 60 | 60 | Max. cable length between converter and motor with standard insulation | | | | | | | | m | 3005) | 3005) | 3005) | 3005) | 3005) | Line/load connection | | | | | | | L1, L2, L3/U2, V2, W2 | | | | | | | For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions" | | | | | | | Dimensions | | | | | | | | mm | 225 | 225 | 225 | 225 | 350 | - Height
(without mounting brackets)
| mm | 610 | 610 | 610 | 610 | 710 | | mm | 320 | 320 | 320 | 320 | 320 | Weight, approx. | kg | 26 | 26 | 28 | 28 | 55 | Approvals, according to | | NRTL6) | NRTL6) | NRTL6) | NRTL6) | NRTL6) | Frame size | | K3 | K3 | K3 | K3 | K4 |
1)Rated power of a typical 2- to 6-pole standard motor. 2) Typical output voltage dependent on filter and unit type. 3) Maximum power loss with continuous current. 4)EMC filter not required for IT system, in which case RI suppression category C4. 5) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is integrated in unit). 6)On request; the voltage range for NRTL units ends at max. 600V. Line voltage, supply system type | | 230...690 V3AC, TT/TN or IT |
|---|
SINAMICS G180
compact units | | 6SE0100‑1A❑24‑2❑A7 | 6SE0100‑1A❑25‑0❑A7 | 6SE0100‑1A❑25‑8❑A7 | 6SE0100‑1A❑28‑0❑A7 | 6SE0100‑1A❑31‑0❑A7 | Converter type | | 2T2A‑07600‑037 | 2T2A‑07600‑045 | 2T2A‑07600‑055 | 2T2A‑07600‑075 | 2T2A‑07600‑090 | Electrical data at motor end | Type rating 1) | | | | | | | | kW | 37 | 45 | 55 | 75 | 90 | | hp | 41 | 50 | 62 | 84 | 101 | Output voltage2) | V | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | Output current | | | | | | | | A | 43 | 50 | 60 | 80 | 95 | - Short-time current
(60s every 10minutes) max.
| A | 55 | 65 | 75 | 90 | 120 | Overload capability
(60s every 10minutes) max. | % | 28 | 30 | 25 | 13 | 26 | Output power | kVA | 51.4 | 59.8 | 71.7 | 95.6 | 114 | Output frequency, max. | Hz | 250 | 250 | 250 | 250 | 250 | Rated clock cycle | kHz | 3 | 3 | 3 | 3 | 3 | adjustable from | kHz | 2...5 | 2...5 | 2...5 | 2...5 | 2...5 | Power loss 3) | kW | 1.19 | 1.44 | 1.68 | 2.28 | 2.63 | Rated efficiency | % | 97.1 | 97.1 | 97.2 | 97.2 | 97.3 | Electrical data at line end | Connected load | kVA | 16 | 24.4 | 32 | 39.2 | 52.3 | Rated input voltage | V | 690 | 690 | 690 | 690 | 690 | Input current | | | | | | | | A | 42.9 | 50.1 | 60.7 | 80.9 | 102 | - Short-time line current (60s) max.
| A | 55 | 65 | 76 | 91 | 129 | Line fuse (provided by customer) | gL(A) | 50...63 | 63 | 63...80 | 100 | 125 | λline | | 0.898 | 0.863 | 0.894 | 0.896 | 0.845 | Cosφline | | 1 | 1 | 1 | 1 | 1 | Radio interference suppression acc. to
EN61800‑34) | | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | Mechanical data | Coolant requirements | m3/h | 750 | 750 | 750 | 750 | 1050 | Sound pressure level LpA | | | | | | | (1 m) at 50/60 Hz | dB | 60 | 60 | 60 | 60 | 62 | Max. cable length between converter and motor with standard insulation | | | | | | | | m | 3005) | 3005) | 3005) | 3005) | 150 (300) 6) | Line/load connection | | | | | | | L1, L2, L3/U2, V2, W2 | | | | | | | For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions" | | | | | | | Dimensions | | | | | | | | mm | 350 | 350 | 350 | 350 | 350 | - Height
(without mounting brackets)
| mm | 710 | 710 | 710 | 710 | 1060 | | mm | 320 | 320 | 320 | 320 | 320 | Weight, approx. | kg | 55 | 59 | 59 | 59 | 90 | Approvals, according to | | NRTL7) | NRTL7) | NRTL7) | NRTL7) | NRTL7) | Frame size | | K4 | K4 | K4 | K4 | K5 |
1)Rated power of a typical 2- to 6-pole standard motor. 2) Typical output voltage dependent on filter and unit type. 3) Maximum power loss with continuous current. 4)EMC filter not required for IT system, in which case RI suppression category C4. 5) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is integrated in unit). 6) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is supplied separately with unit). 7)On request; the voltage range for NRTL units ends at max. 600V. Line voltage, supply system type | | 230...690 V3AC, TT/TN or IT |
|---|
SINAMICS G180
compact units | | 6SE0100‑1A❑31‑2❑A7 | 6SE0100‑1A❑31‑4❑A7 | 6SE0100‑1A❑31‑7❑A7 | 6SE0100‑1A❑32‑1❑A7 | | Converter type | | 2T2A‑07600‑110 | 2T2A‑07600‑132 | 2T2A‑07600‑160 | 2T2A‑07600‑200 | | Electrical data at motor end | Type rating 1) | | | | | | | | kW | 110 | 132 | 160 | 200 | | | hp | 122 | 148 | 179 | 224 | | Output voltage2) | V | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | 0...0.98×Vline | | Output current | | | | | | | | A | 120 | 150 | 175 | 210 | | - Short-time current
(60s every 10minutes) max.
| A | 140 | 175 | 210 | 255 | | Overload capability
(60s every 10minutes) max. | % | 17 | 17 | 20 | 21 | | Output power | kVA | 143 | 179 | 209 | 251 | | Output frequency, max. | Hz | 250 | 250 | 250 | 250 | | Rated clock cycle | kHz | 3 | 3 | 3 | 3 | | adjustable from | kHz | 2...5 | 2...5 | 2...5 | 2...5 | | Power loss 3) | kW | 3.21 | 3.7 | 4.48 | 5.38 | | Rated efficiency | % | 97.3 | 97.4 | 97.4 | 97.5 | | Electrical data at line end | Connected load | kVA | 57.5 | 74.8 | 98.4 | 119 | | Rated input voltage | V | 690 | 690 | 690 | 690 | | Input current | | | | | | | | A | 119 | 153 | 180 | 222 | | - Short-time line current (60s) max.
| A | 139 | 178 | 216 | 270 | | Line fuse (provided by customer) | gL(A) | 125...160 | 160...200 | 200...250 | 250...315 | | λline | | 0.883 | 0.857 | 0.862 | 0.838 | | Cosφline | | 1 | 1 | 1 | 1 | | Radio interference suppression acc. to
EN61800‑3 | | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | C2 (class A filter) | | Mechanical data | Coolant requirements | m3/h | 1050 | 1050 | 1600 | 1600 | | Sound pressure level LpA | | | | | | | (1 m) at 50/60 Hz | dB | 62 | 62 | 64 | 64 | | Max. cable length between converter and motor with standard insulation | | | | | | | | m | 150/3004) | 150/3004) | 150/3004) | 150/3004) | | Line/load connection | | | | | | | L1, L2, L3/U2, V2, W2 | | | | | | | For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions" | | | | | | | Dimensions | | | | | | | | mm | 350 | 350 | 500 | 500 | | - Height
(without mounting brackets)
| mm | 1060 | 1060 | 1060 | 1060 | | | mm | 320 | 320 | 320 | 320 | | Weight, approx. | kg | 94 | 96 | 170 | 180 | | Approvals, according to | | NRTL5) | NRTL5) | NRTL5) | NRTL5) | | Frame size | | K5 | K5 | K6 | K6 | |
1)Rated power of a typical 2- to 6-pole standard motor. 2) Typical output voltage dependent on filter and unit type. 3) Maximum power loss with continuous current. 4) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is supplied separately with unit). 5) On request; the voltage range for NRTL units ends at max. 600V.
|
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
DENDOR
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS -
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK -
|
