The most important directives and standards are listed below. These are used as basis for the SINAMICS G180 compact units and they must be carefully observed to achieve an EMC-compliant configuration that is safe both functionally and in operation.
Standards for compact units
European directives
2006/95/EC
Low-voltage directive: Legal guidelines of the EU member states concerning electrical equipment for use within specified voltage limits
2004/108/EC
EMC Directive: Legal guidelines of the EU member states for electromagnetic compatibility
International and European standards
EN 954-1
Safety of machinery – Safety-related parts of control systems; Part 1: General design principles
EN ISO 13849?1
Safety of machinery – Safety-related parts of control systems; Part 1: General design principles (EN ISO 13849-1:2006 (replaced EN 954-1)
EN 60146?1?1
Semiconductor converters – General requirements and line-commutated converters Part 1-1: Specification of basic requirements
EN 60204?1
Electrical equipment of machines Part 1: General definitions
EN 60529
Degrees of protection provided by enclosures (IP code)
EN 61140
Protection against electric shock - Common aspects for installation and equipment
EN 61508?1
Functional safety of electrical/electronic/programmable electronic safety-related systems, Part 1: General requirements
EN 61800?2
Adjustable speed electrical power drive systems, Part 2: General requirements – Rating specifications for low-voltage adjustable frequency AC power drive systems
EN 61800?3
Adjustable speed electrical power drive systems, Part 3: EMC requirements and specific test methods
EN 61800-5-1
Adjustable speed electrical power drive systems, Part 5-1: Safety requirements - Electrical, thermal and energy requirements
EN 61800?5?2
Adjustable speed electrical power drive systems, Part 5-2: Safety requirements - Functional safety (IEC 61800-5-2:2007)
North American standards
UL508C1)
Power conversion equipment
Approvals
TUV NRTL US1)
Nationally Recognized Testing Laboratory
1) On request
General technical data
Electrical data
Line voltages
Type of supply system
Power ranges
230 ... 400 ... 500 V 3 AC, -15/+10 %
TN/TT system
2.2 ... 160 kW (at 400 V)
230 ... 500 V 3 AC, -15/+10 %
IT system
2.2 ... 200 kW (at 500 V)
230 ... 690 V 3 AC, -15/+10 %
TN/TT or IT system
7.5 ... 200 kW (at 690 V)
Line frequency
47 ... 63 Hz
Output frequency
0 ... 250 Hz
Voltage rise in motor
Typ. 500 ... 1000 V/?s, but < 1500 V/?s
Typical line harmonics (I) in % of fundamental mode for the 5/7/11/13/17/19/23/25 harmonics max.
38/18/8/7/5/4/3/2
Typical line harmonics (I) in % of fundamental mode for the 5/7/11/13/17/19/23/25 harmonics max. with LHF filter
1.4/3.6/2.4/1.7/1.0/0.6/0.8/0.4
Pulse number
6
Overvoltage category
III to EN 61800?5?1
Short Circuit Current Rating (SCCR) according to UL508C (up to 600 V), in conjunction with the specified fuses or circuit breakers
60 kA
Control method
For motors: Field-oriented control (FOC) with sensor and approval for explosion-proof motors as well as vector control (SVC) with/without sensor (speed, process speed (n), torque, hoist1), line synchronization1))
Motor-independent control of current or voltage (current, process current (I), voltage, process voltage (U))
Fixed speeds
3 fixed speeds + 1 minimum speed, parameterizable
Skipped speed ranges
2, parameterizable
Setpoint resolution
13 bits digital with n/f setpoint, 12 bits digital with U/I torque setpoint, 9 bits + sign analog
Braking operation
The oversaturation control system makes it possible to generate a braking torque of up to 50 % at low to mid-range speeds, and of up to 10 % at high speeds. If a higher braking torque is required, an optionally available braking module with appropriate braking resistor must be installed.
Mechanical data
Degree of protection
IP20, optionally IP21 provided by protective top cover (aluminum, unpainted)
Protection class
I acc. to EN 61800?5?1
Touch protection
EN 50274 / BGV A3
Type of cooling
Forced air cooling AF to EN 60146
Paint finish
RAL 9023 (R-Pearl Dark Grey)
Cable entry
From below
Ambient conditions2)
Storage 3)
Transport 3)
Operation
Ambient temperature
-25 ... +70 °C
Class 1K4 acc. to EN 60721-3-1
-25 ... +70 °C down to -40 °C for 24h Class 2K3 acc. to EN 60721?3?2
Air: 0 ... 40 °C/
–
Relative humidity (condensation not permissible)
5 ... 95 % Class 1K3 acc. to EN 60721?3?1
5 ... 95 % Class 2K3 acc. to EN 60721?3?2
5 ... 95 % Class 3K3 acc. to EN 60721?3?3
Environmental class/harmful chemical substances
Class 1C2 acc. to EN 60721?3?1
Class 2C2 acc. to EN 60721?3?2
Class 3C2 acc. to EN 60721?3?3
Organic/biological influences
Class 1B1 acc. to EN 60721?3?1
Class 2B1 acc. to EN 60721?3?2
Class 3B1 acc. to EN 60721?3?3
Pollution degree
2 acc. to EN 61800?5?1
Installation altitude
Up to 1000 m above sea level without derating, > 1000 m see derating table (in chapter Configuring instructions)
Mechanical stability2)
Storage 3)
Transport 3)
Operation
Vibratory load
Deflection
Acceleration
1.5 mm at 5 ... 9 Hz
5 m/s2 at > 9 ... 200 Hz
Class 1M2 acc. to EN 60721?3?1
3.1 mm at 5 ... 9 Hz
10 m/s2 at > 9 ... 200 Hz
Class 2M2 acc. to EN 60721?3?2
0.075 mm at 10 … 58 Hz
10 m/s2 at > 58 … 200 Hz
-
Shock load
Acceleration
40 m/s2 at 22 ms
Class 1M2 acc. to EN 60721?3?1
100 m/s2 at 11 ms
Class 2M2 acc. to EN 60721?3?2
100 m/s2 at 11 ms
Class 3M4 acc. to EN 60721?3?3
Compliance with standards
CE Label
Acc. to EMC Directive No. 2004/108/EC and Low-Voltage Directive No. 2006/95/EC
Radio interference suppression
Complies with EMC guidelines defined in EN 61800?3 thanks to line filter which is integrated as standard (with grounded supply system):
Category C2 for compact units in TN/TT system of the first environment (residential area), category C1 available as an option
Category C4 for compact units in IT system of the second environment (industrial area)
Approvals
TUV NRTL US2)
1) On request
2) Higher standards on request
3) In transport packaging
Deviations from the specified classes are underlined.
400 V, 6?pulse
Line voltage, supply system type
230 ... 500 V 3 AC, TT/TN
SINAMICS G180 compact units
6SE0100?1AC15?5?A7
6SE0100?1AC17?0?A7
6SE0100?1AC21?0?A7
6SE0100?1AC21?3?A7
6SE0100?1AC21?8?A7
Converter type
2T2A?07400?002
2T2A?07400?003
2T2A?07400?004
2T2A?07400?005
2T2A?07400?007
Electrical data at motor end
Type rating 1)
at 50 Hz 400 V
kW
2.2
3
4
5.5
7.5
at 60 Hz 460 V
hp
3
5
6
9
12
Output voltage2)
V
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
Output current
Continuous current
A
5.5
7
9.5
13
18
Short-time current (60 s every 10 minutes) max.
A
6.5
8
11
15
20
Overload capability (60 s every 10 minutes) max.
%
18
14
16
15
11
Output power
kVA
3.8
4.8
6.6
9
12.5
Output frequency, max.
Hz
250
250
250
250
250
Rated clock cycle
kHz
4.5
4.5
4.5
4.5
4.5
adjustable from
kHz
3 ... 7.5
3 ... 7.5
3 ... 7.5
3 ... 7.5
3 ... 7.5
Power loss 3)
kW
0.13
0.16
0.2
0.26
0.33
Rated efficiency
%
95.2
95.8
95.9
96
96.2
Electrical data at line end
Connected load
kVA
3.7
4.5
6.2
8.5
12
Rated input voltage
V
400
400
400
400
400
Input current
Continuous line current
A
5.3
6.5
8.9
12.2
17.3
Short-time line current (60 s) max.
A
6.3
7.4
10
14
19
Line fuse (provided by customer)
gL (A)
6 … 16
10 ... 16
10 ... 16
16
20 ... 32
?line
0.927
0.94
0.918
0.937
0.918
Cos ?line
1
1
1
1
1
Radio interference suppression acc. to EN 61800?3
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
Mechanical data
Coolant requirements
m3/h
45
45
90
90
90
Sound pressure level LpA
(1 m) at 50/60 Hz
dB
60
60
60
60
60
Max. cable length between converter and motor with standard insulation
on systems ? 400 V (shielded)
m
200/3504)
200/3504)
200/3504)
200/3504)
200/3504)
on systems > 400 V (shielded)
m
150/3004)
150/3004)
150/3004)
150/3004)
150/3004)
Line/load connection
L1, L2, L3/U2, V2, W2
For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions"
Dimensions
Width
mm
165
165
165
165
165
Height (without mounting brackets)
mm
410
410
410
410
510
Depth
mm
320
320
320
320
320
Weight, approx.
kg
11.5
11.5
11.5
11.5
16.5
Approvals, according to
NRTL5)
NRTL5)
NRTL5)
NRTL5)
NRTL5)
Frame size
K1
K1
K1
K1
K2
1) Rated power of a typical 2- to 6-pole standard motor.
2) Typical output voltage dependent on filter and unit type.
3) Maximum power loss with continuous current.
4) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is integrated in unit).
5) On request
Line voltage, supply system type
230 ... 500 V 3 AC, TT/TN
SINAMICS G180 compact units
6SE0100?1AC22?5?A7
6SE0100?1AC23?7?A7
6SE0100?1AC24?8?A7
6SE0100?1AC25?8?A7
6SE0100?1AC27?8?A7
Converter type
2T2A?07400?011
2T2A?07400?015
2T2A?07400?022
2T2A?07400?030
2T2A?07400?037
Electrical data at motor end
Type rating 1)
at 50 Hz 400 V
kW
11
15
22
30
37
at 60 Hz 460 V
hp
17
23
34
46
57
Output voltage2)
V
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
Output current
Continuous current
A
24.5
37
48
58
78
Short-time current (60 s every 10 minutes) max.
A
27
44
54
63
88
Overload capability (60 s every 10 minutes) max.
%
10
19
13
9
13
Output power
kVA
17
25.6
33.3
40.2
54
Output frequency, max.
Hz
250
250
250
250
250
Rated clock cycle
kHz
4.5
4.5
4.5
4.5
3
adjustable from
kHz
3 ... 7.5
3 ... 7.5
3 ... 7.5
3 ... 7.5
2 ... 5
Power loss 3)
kW
0.47
0.6
0.84
1.1
1.35
Rated efficiency
%
96.3
96.5
96.6
96.7
96.7
Electrical data at line end
Connected load
kVA
15.7
24.3
31.8
39.1
52.2
Rated input voltage
V
400
400
400
400
400
Input current
Continuous line current
A
22.7
35.1
45.9
56.5
75.3
Short-time line current (60 s) max.
A
25
42
52
61
85
Line fuse (provided by customer)
gL (A)
25 ... 32
40 ... 80
50 ... 80
63 … 80
80 ... 100
?line
0.932
0.932
0.932
0.924
0.932
Cos ?line
1
1
1
1
1
Radio interference suppression acc. to EN 61800?3
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
Mechanical data
Coolant requirements
m3/h
130
280
280
280
750
Sound pressure level LpA
(1 m) at 50/60 Hz
dB
60
60
60
60
62
Max. cable length between converter and motor with standard insulation
on systems ? 400 V (shielded)
m
200/3504)
200/3504)
200/3504)
200/3504)
200/3504)
on systems > 400 V (shielded)
m
150/3004)
150/3004)
150/3004)
150/3004)
150/3004)
Line/load connection
L1, L2, L3/U2, V2, W2
For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions"
Dimensions
Width
mm
165
225
225
225
350
Height (without mounting brackets)
mm
510
610
610
610
710
Depth
mm
320
320
320
320
320
Weight, approx.
kg
16.5
30
31
31
51
Approvals, according to
NRTL5)
NRTL5)
NRTL5)
NRTL5)
NRTL5)
Frame size
K2
K3
K3
K3
K4
1) Rated power of a typical 2- to 6-pole standard motor.
2) Typical output voltage dependent on filter and unit type.
3) Maximum power loss with continuous current.
4) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is integrated in unit).
5) On request
Line voltage, supply system type
230 ... 500 V 3 AC, TT/TN
SINAMICS G180 compact units
6SE0100?1AC28?8?A7
6SE0100?1AC31?1?A7
6SE0100?1AC31?5?A7
6SE0100?1AC31?8?A7
6SE0100?1AC32?1?A7
Converter type
2T2A?07400?045
2T2A?07400?055
2T2A?07400?075
2T2A?07400?090
2T2A?07400?110
Electrical data at motor end
Type rating 1)
at 50 Hz 400 V
kW
45
55
75
90
110
at 60 Hz 460 V
hp
69
85
116
139
170
Output voltage2)
V
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
Output current
Continuous current
A
88
110
145
175
205
Short-time current (60 s every 10 minutes) max.
A
110
126
165
204
240
Overload capability (60 s every 10 minutes) max.
%
25
15
14
17
17
Output power
kVA
61
76.2
100
121
142
Output frequency, max.
Hz
250
250
250
250
250
Rated clock cycle
kHz
3
3
3
3
3
adjustable from
kHz
2 ... 5
2 ... 5
2 ... 5
2 ... 5
2 ... 5
Power loss 3)
kW
1.59
1.86
2.37
2.83
3.33
Rated efficiency
%
96.8
96.9
97.1
97.1
97.2
Electrical data at line end
Connected load
kVA
57.3
74.8
97.7
119
134
Rated input voltage
V
400
400
400
400
400
Input current
Continuous line current
A
82.7
108
141
172
194
Short-time line current (60 s) max.
A
103
124
160
200
227
Line fuse (provided by customer)
gL (A)
100
125
160
200
200 ... 250
?line
0.924
0.929
0.929
0.924
0.924
Cos ?line
1
1
1
1
1
Radio interference suppression acc. to EN 61800?3
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
Mechanical data
Coolant requirements
m3/h
750
750
1050
1050
1050
Sound pressure level LpA
(1 m) at 50/60 Hz
dB
62
62
64
64
64
Max. cable length between converter and motor with standard insulation
on systems ? 400 V (shielded)
m
200/3504)
200/3504)
200/3504)
200/3504)
200/3504)
on systems > 400 V (shielded)
m
150/3004)
150/3004)
150/3004)
150/3004)
150/3004)
Line/load connection
L1, L2, L3/U2, V2, W2
For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions"
Dimensions
Width
mm
350
350
350
350
350
Height (without mounting brackets)
mm
710
710
1060
1060
1060
Depth
mm
320
320
320
320
320
Weight, approx.
kg
53
55
90
94
96
Approvals, according to
NRTL5)
NRTL5)
NRTL5)
NRTL5)
NRTL5)
Frame size
K4
K4
K5
K5
K5
1) Rated power of a typical 2- to 6-pole standard motor.
2) Typical output voltage dependent on filter and unit type.
3) Maximum power loss with continuous current.
4) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is integrated in unit).
5) On request
Line voltage, supply system type
230 ... 500 V 3 AC, TT/TN
SINAMICS G180 compact units
6SE0100?1AC32?5?A7
6SE0100?1AC33?0?A7
Converter type
2T2A?07400?132
2T2A?07400?160
Electrical data at motor end
Type rating 1)
at 50 Hz 400 V
kW
132
160
at 60 Hz 460 V
hp
204
247
Output voltage2)
V
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
Output current
Continuous current
A
245
295
Short-time current (60 s every 10 minutes) max.
A
300
360
Overload capability (60 s every 10 minutes) max.
%
22
22
Output power
kVA
170
204
Output frequency, max.
Hz
250
250
Rated clock cycle
kHz
3
3
adjustable from
kHz
2 ... 5
2 ... 5
Power loss 3)
kW
3.84
4.65
Rated efficiency
%
97.3
97.3
Electrical data at line end
Connected load
kVA
161
197
Rated input voltage
V
400
400
Input current
Continuous line current
A
232
284
Short-time line current (60 s) max.
A
284
347
Line fuse (provided by customer)
gL (A)
250 ... 315
315 ... 400
?line
0.924
0.924
Cos ?line
1
1
Radio interference suppression acc. to EN 61800?3
C2 (class A filter)
C2 (class A filter)
Mechanical data
Coolant requirements
m3/h
1600
1600
Sound pressure level LpA
(1 m) at 50/60 Hz
dB
66
66
Max. cable length between converter and motor with standard insulation
on systems ? 400 V (shielded)
m
200/3504)
200/3504)
on systems > 400 V (shielded)
m
150/3004)
150/3004)
Line/load connection
L1, L2, L3/U2, V2, W2
For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions"
Dimensions
Width
mm
500
500
Height (without mounting brackets)
mm
1060
1060
Depth
mm
320
320
Weight, approx.
kg
160
170
Approvals, according to
NRTL5)
NRTL5)
Frame size
K6
K6
1) Rated power of a typical 2- to 6-pole standard motor.
2) Typical output voltage dependent on filter and unit type.
3) Maximum power loss with continuous current.
4) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is integrated in unit).
5) On request
500 V, 6?pulse
Line voltage, supply system type
230 ... 500 V 3 AC, IT
SINAMICS G180 compact units
6SE0100?1AD14?5?A7
6SE0100?1AD15?5?A7
6SE0100?1AD17?0?A7
6SE0100?1AD21?0?A7
6SE0100?1AD21?3?A7
Converter type
2T2A?07500?002
2T2A?07500?003
2T2A?07500?004
2T2A?07500?005
2T2A?07500?007
Electrical data at motor end
Type rating 1)
at 50 Hz 500 V
kW
2.2
3
4
5.5
7.5
at 60 Hz 460 V
hp
3
4
5
7
9
Output voltage2)
V
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
Output current
Continuous current
A
4.5
5.5
7
9.5
13
Short-time current (60 s every 10 minutes) max.
A
5
6.5
8
11
15
Overload capability (60 s every 10 minutes) max.
%
11
18
14
16
15
Output power
kVA
3.9
4.8
6.1
8.2
11.3
Output frequency, max.
Hz
250
250
250
250
250
Rated clock cycle
kHz
4.5
4.5
4.5
4.5
4.5
adjustable from
kHz
3 ... 7.5
3 ... 7.5
3 ... 7.5
3 ... 7.5
3 ... 7.5
Power loss 3)
kW
0.12
0.16
0.2
0.26
0.34
Rated efficiency
%
95.6
95.7
95.9
96.0
96.1
Electrical data at line end
Connected load
kVA
3.7
4.6
6.4
8.6
12.1
Rated input voltage
V
500
500
500
500
500
Input current
Continuous line current
A
4.4
5.2
6.5
9.3
12.5
Short-time line current (60 s) max.
A
4.9
6.1
7.4
11
14
Line fuse (provided by customer)
gL (A)
4 ... 16
6 ... 16
10 ... 16
10 ... 16
16
?line
0.902
0.912
0.932
0.908
0.927
Cos ?line
1
1
1
1
1
Radio interference suppression acc. to EN 61800?3
C4
C4
C4
C4
C4
Mechanical data
Coolant requirements
m3/h
45
45
45
90
90
Sound pressure level LpA
(1 m) at 50/60 Hz
dB
60
60
60
60
60
Max. cable length between converter and motor with standard insulation
(shielded)
m
3004)
3004)
3004)
3004)
3004)
Line/load connection
L1, L2, L3/U2, V2, W2
For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions"
Dimensions
Width
mm
165
165
165
165
165
Height (without mounting brackets)
mm
410
410
410
410
410
Depth
mm
320
320
320
320
320
Weight, approx.
kg
11.5
11.5
11.5
11.5
11.5
Approvals, according to
NRTL5)
NRTL5)
NRTL5)
NRTL5)
NRTL5)
Frame size
K1
K1
K1
K1
K1
1) Rated power of a typical 2- to 6-pole standard motor.
2) Typical output voltage dependent on filter and unit type.
3) Maximum power loss with continuous current.
4) Option L10 included (strengthened dv/dt filter; strengthened filter is integrated in unit).
5) On request
Line voltage, supply system type
230 ... 500 V 3 AC, IT
SINAMICS G180 compact units
6SE0100?1AD21?8?A7
6SE0100?1AD22?5?A7
6SE0100?1AD23?7?A7
6SE0100?1AD24?8?A7
6SE0100?1AD25?8?A7
Converter type
2T2A?07500?011
2T2A?07500?015
2T2A?07500?022
2T2A?07500?030
2T2A?07500?037
Electrical data at motor end
Type rating 1)
at 50 Hz 500 V
kW
11
15
22
30
37
at 60 Hz 460 V
hp
17
23
34
46
57
Output voltage2)
V
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
Output current
Continuous current
A
18
24.5
37
48
58
Short-time current (60 s every 10 minutes) max.
A
20
27
44
54
63
Overload capability (60 s every 10 minutes) max.
%
11
10
19
13
9
Output power
kVA
15.6
21.2
32
41.6
50.2
Output frequency, max.
Hz
250
250
250
250
250
Rated clock cycle
kHz
4.5
4.5
4.5
4.5
4.5
adjustable from
kHz
3 ... 7.5
3 ... 7.5
3 ... 7.5
3 ... 7.5
3 ... 7.5
Power loss 3)
kW
0.48
0.63
0.89
1.17
1.35
Rated efficiency
%
96.2
96.3
96.4
96.5
96.7
Electrical data at line end
Connected load
kVA
16
24.4
32
39.2
52.3
Rated input voltage
V
500
500
500
500
500
Input current
Continuous line current
A
17.4
23.4
35.8
46.8
57.1
Short-time line current (60 s) max.
A
19
26
43
53
62
Line fuse (provided by customer)
gL (A)
20 ... 32
25 ... 32
40 ... 80
50 ... 80
63 ... 80
?line
0.902
0.924
0.918
0.924
0.912
Cos ?line
1
1
1
1
1
Radio interference suppression acc. to EN 61800?3
C4
C4
C4
C4
C4
Mechanical data
Coolant requirements
m3/h
90
130
280
280
280
Sound pressure level LpA
(1 m) at 50/60 Hz
dB
60
60
60
60
62
Max. cable length between converter and motor with standard insulation
(shielded)
m
3004)
3004)
3004)
3004)
3004)
Line/load connection
L1, L2, L3/U2, V2, W2
For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions"
Dimensions
Width
mm
165
165
225
225
225
Height (without mounting brackets)
mm
510
510
610
610
610
Depth
mm
320
320
320
320
320
Weight, approx.
kg
16.5
17.5
30
32
32
Approvals, according to
NRTL5)
NRTL5)
NRTL5)
NRTL5)
NRTL5)
Frame size
K2
K2
K3
K3
K3
1) Rated power of a typical 2- to 6-pole standard motor.
2) Typical output voltage dependent on filter and unit type.
3) Maximum power loss with continuous current.
4) Option L10 included (strengthened dv/dt filter; strengthened filter is integrated in unit).
5) On request
Line voltage, supply system type
230 ... 500 V 3 AC, IT
SINAMICS G180 compact units
6SE0100?1AD27?8?A7
6SE0100?1AD28?8?A7
6SE0100?1AD31?1?A7
6SE0100?1AD31?5?A7
6SE0100?1AD31?8?A7
Converter type
2T2A?07500?045
2T2A?07500?055
2T2A?07500?075
2T2A?07500?090
2T2A?07500?110
Electrical data at motor end
Type rating 1)
at 50 Hz 500 V
kW
45
55
75
90
110
at 60 Hz 460 V
hp
56
68
93
111
136
Output voltage2)
V
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
Output current
Continuous current
A
78
88
110
145
175
Short-time current (60 s every 10 minutes) max.
A
88
110
126
165
204
Overload capability (60 s every 10 minutes) max.
%
13
25
15
14
17
Output power
kVA
67.5
76.2
95.3
126
152
Output frequency, max.
Hz
250
250
250
250
250
Rated clock cycle
kHz
3
3
3
3
3
adjustable from
kHz
2 ... 5
2 ... 5
2 ... 5
20 ... 5
2 ... 5
Power loss 3)
kW
1.59
1.8
2.37
2.83
3.33
Rated efficiency
%
96.8
97.0
97.1
97.1
97.2
Electrical data at line end
Connected load
kVA
57.5
74.8
98.4
119
136
Rated input voltage
V
500
500
500
500
500
Input current
Continuous line current
A
73.7
87.6
109
143
170
Short-time line current (60 s) max.
A
83
110
125
163
198
Line fuse (provided by customer)
gL (A)
80 ... 100
100
125
160
200
?line
0.918
0.912
0.918
0.918
0.908
Cos ?line
1
1
1
1
1
Radio interference suppression acc. to EN 61800?3
C4
C4
C4
C4
C4
Mechanical data
Coolant requirements
m3/h
750
750
750
1050
1050
Sound pressure level LpA
(1 m) at 50/60 Hz
dB
62
62
64
64
64
Max. cable length between converter and motor with standard insulation
(shielded)
m
3004)
3004)
3004)
3004)
3004)
Line/load connection
L1, L2, L3/U2, V2, W2
For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions"
Dimensions
Width
mm
350
350
350
350
350
Height (without mounting brackets)
mm
710
710
710
1060
1060
Depth
mm
320
320
320
320
320
Weight, approx.
kg
51
53
55
90
94
Approvals, according to
NRTL5)
NRTL5)
NRTL5)
NRTL5)
NRTL5)
Frame size
K4
K4
K4
K5
K5
1) Rated power of a typical 2- to 6-pole standard motor.
2) Typical output voltage dependent on filter and unit type.
3) Maximum power loss with continuous current.
4) Option L10 included (strengthened dv/dt filter; strengthened filter is integrated in unit).
5) On request
Line voltage, supply system type
230 ... 500 V 3 AC, IT
SINAMICS G180 compact units
6SE0100?1AD32?1?A7
6SE0100?1AD32?5?A7
6SE0100?1AD33?0?A7
Converter type
2T2A?07500?132
2T2A?07500?160
2T2A?07500?200
Electrical data at motor end
Type rating 1)
at 50 Hz 500 V
kW
132
160
200
at 60 Hz 460 V
hp
163
197
247
Output voltage2)
V
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
Output current
Continuous current
A
205
245
295
Short-time current (60 s every 10 minutes) max.
A
240
300
360
Overload capability (60 s every 10 minutes) max.
%
17
22
22
Output power
kVA
178
212
256
Output frequency, max.
Hz
250
250
250
Rated clock cycle
kHz
3
3
3
adjustable from
kHz
2 ... 5
2 ... 5
2 ... 5
Power loss 3)
kW
3.84
4.48
5.6
Rated efficiency
%
97.3
97.4
97.4
Electrical data at line end
Connected load
kVA
161
197
3.8
Rated input voltage
V
500
500
500
Input current
Continuous line current
A
196
237
286
Short-time line current (60 s) max.
A
230
290
349
Line fuse (provided by customer)
gL (A)
200 ... 250
250 ... 315
315 ... 400
?line
0.912
0.912
0.912
Cos ?line
1
1
1
Radio interference suppression acc. to EN 61800?3
C4
C4
C4
Mechanical data
Coolant requirements
m3/h
1050
1600
1600
Sound pressure level LpA
(1 m) at 50/60 Hz
dB
66
66
60
Max. cable length between converter and motor with standard insulation
(shielded)
m
3004)
3004)
3004)
Line/load connection
L1, L2, L3/U2, V2, W2
For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions"
Dimensions
Width
mm
350
500
500
Height (without mounting brackets)
mm
1060
1060
1060
Depth
mm
320
320
320
Weight, approx.
kg
96
170
180
Approvals, according to
NRTL5)
NRTL5)
NRTL5)
Frame size
K5
K6
K6
1) Rated power of a typical 2- to 6-pole standard motor.
2) Typical output voltage dependent on filter and unit type.
3) Maximum power loss with continuous current.
4) Option L10 included (strengthened dv/dt filter; strengthened filter is integrated in unit).
5) On request
690 V, 6?pulse
Line voltage, supply system type
230 ... 690 V 3 AC, TT/TN or IT
SINAMICS G180 compact units
6SE0100?1A?21?0?A7
6SE0100?1A?21?3?A7
6SE0100?1A?21?8?A7
6SE0100?1A?22?5?A7
6SE0100?1A?23?4?A7
Converter type
2T2A?07600?007
2T2A?07600?011
2T2A?07600?015
2T2A?07600?022
2T2A?07600?030
Electrical data at motor end
Type rating 1)
at 50 Hz 690 V
kW
7.5
11
15
22
30
at 60 Hz 575 V
hp
8
12
17
25
34
Output voltage2)
V
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
Output current
Continuous current
A
9.5
13
18
27
36
Short-time current (60 s every 10 minutes) max.
A
11
16
21
33
45
Overload capability (60 s every 10 minutes) max.
%
16
23
17
22
25
Output power
kVA
11.4
15.5
21.5
32.3
43
Output frequency, max.
Hz
250
250
250
250
250
Rated clock cycle
kHz
3
3
3
3
3
adjustable from
kHz
2 ... 5
2 ... 5
2 ... 5
2 ... 5
2 ... 5
Power loss 3)
kW
0.29
0.4
0.55
0.74
1
Rated efficiency
%
96.7
96.8
96.8
97.0
97.0
Electrical data at line end
Connected load
kVA
3.7
4.6
6.4
8.6
12.1
Rated input voltage
V
690
690
690
690
690
Input current
Continuous line current
A
8.8
11.8
16.8
25.3
37.3
Short-time line current (60 s) max.
A
10
14
20
31
47
Line fuse (provided by customer)
gL (A)
10 ... 32
16 ... 32
20 ... 32
32
40 ... 63
?line
0.94
0.948
0.94
0.948
0.867
Cos ?line
1
1
1
1
1
Radio interference suppression acc. to EN 61800?34)
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
Mechanical data
Coolant requirements
m3/h
90
90
130
130
750
Sound pressure level LpA
(1 m) at 50/60 Hz
dB
60
60
60
60
60
Max. cable length between converter and motor with standard insulation
(shielded)
m
3005)
3005)
3005)
3005)
3005)
Line/load connection
L1, L2, L3/U2, V2, W2
For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions"
Dimensions
Width
mm
225
225
225
225
350
Height (without mounting brackets)
mm
610
610
610
610
710
Depth
mm
320
320
320
320
320
Weight, approx.
kg
26
26
28
28
55
Approvals, according to
NRTL6)
NRTL6)
NRTL6)
NRTL6)
NRTL6)
Frame size
K3
K3
K3
K3
K4
1) Rated power of a typical 2- to 6-pole standard motor.
2) Typical output voltage dependent on filter and unit type.
3) Maximum power loss with continuous current.
4) EMC filter not required for IT system, in which case RI suppression category C4.
5) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is integrated in unit).
6) On request; the voltage range for NRTL units ends at max. 600 V.
Line voltage, supply system type
230 ... 690 V 3 AC, TT/TN or IT
SINAMICS G180 compact units
6SE0100?1A?24?2?A7
6SE0100?1A?25?0?A7
6SE0100?1A?25?8?A7
6SE0100?1A?28?0?A7
6SE0100?1A?31?0?A7
Converter type
2T2A?07600?037
2T2A?07600?045
2T2A?07600?055
2T2A?07600?075
2T2A?07600?090
Electrical data at motor end
Type rating 1)
at 50 Hz 690 V
kW
37
45
55
75
90
at 60 Hz 575 V
hp
41
50
62
84
101
Output voltage2)
V
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
Output current
Continuous current
A
43
50
60
80
95
Short-time current (60 s every 10 minutes) max.
A
55
65
75
90
120
Overload capability (60 s every 10 minutes) max.
%
28
30
25
13
26
Output power
kVA
51.4
59.8
71.7
95.6
114
Output frequency, max.
Hz
250
250
250
250
250
Rated clock cycle
kHz
3
3
3
3
3
adjustable from
kHz
2 ... 5
2 ... 5
2 ... 5
2 ... 5
2 ... 5
Power loss 3)
kW
1.19
1.44
1.68
2.28
2.63
Rated efficiency
%
97.1
97.1
97.2
97.2
97.3
Electrical data at line end
Connected load
kVA
16
24.4
32
39.2
52.3
Rated input voltage
V
690
690
690
690
690
Input current
Continuous line current
A
42.9
50.1
60.7
80.9
102
Short-time line current (60 s) max.
A
55
65
76
91
129
Line fuse (provided by customer)
gL (A)
50 ... 63
63
63 ... 80
100
125
?line
0.898
0.863
0.894
0.896
0.845
Cos ?line
1
1
1
1
1
Radio interference suppression acc. to EN 61800?34)
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
Mechanical data
Coolant requirements
m3/h
750
750
750
750
1050
Sound pressure level LpA
(1 m) at 50/60 Hz
dB
60
60
60
60
62
Max. cable length between converter and motor with standard insulation
(shielded)
m
3005)
3005)
3005)
3005)
150 (300) 6)
Line/load connection
L1, L2, L3/U2, V2, W2
For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions"
Dimensions
Width
mm
350
350
350
350
350
Height (without mounting brackets)
mm
710
710
710
710
1060
Depth
mm
320
320
320
320
320
Weight, approx.
kg
55
59
59
59
90
Approvals, according to
NRTL7)
NRTL7)
NRTL7)
NRTL7)
NRTL7)
Frame size
K4
K4
K4
K4
K5
1) Rated power of a typical 2- to 6-pole standard motor.
2) Typical output voltage dependent on filter and unit type.
3) Maximum power loss with continuous current.
4) EMC filter not required for IT system, in which case RI suppression category C4.
5) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is integrated in unit).
6) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is supplied separately with unit).
7) On request; the voltage range for NRTL units ends at max. 600 V.
Line voltage, supply system type
230 ... 690 V 3 AC, TT/TN or IT
SINAMICS G180 compact units
6SE0100?1A?31?2?A7
6SE0100?1A?31?4?A7
6SE0100?1A?31?7?A7
6SE0100?1A?32?1?A7
Converter type
2T2A?07600?110
2T2A?07600?132
2T2A?07600?160
2T2A?07600?200
Electrical data at motor end
Type rating 1)
at 50 Hz 690 V
kW
110
132
160
200
at 60 Hz 575 V
hp
122
148
179
224
Output voltage2)
V
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
0 ... 0.98 ? Vline
Output current
Continuous current
A
120
150
175
210
Short-time current (60 s every 10 minutes) max.
A
140
175
210
255
Overload capability (60 s every 10 minutes) max.
%
17
17
20
21
Output power
kVA
143
179
209
251
Output frequency, max.
Hz
250
250
250
250
Rated clock cycle
kHz
3
3
3
3
adjustable from
kHz
2 ... 5
2 ... 5
2 ... 5
2 ... 5
Power loss 3)
kW
3.21
3.7
4.48
5.38
Rated efficiency
%
97.3
97.4
97.4
97.5
Electrical data at line end
Connected load
kVA
57.5
74.8
98.4
119
Rated input voltage
V
690
690
690
690
Input current
Continuous line current
A
119
153
180
222
Short-time line current (60 s) max.
A
139
178
216
270
Line fuse (provided by customer)
gL (A)
125 ... 160
160 ... 200
200 ... 250
250 ... 315
?line
0.883
0.857
0.862
0.838
Cos ?line
1
1
1
1
Radio interference suppression acc. to EN 61800?3
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
C2 (class A filter)
Mechanical data
Coolant requirements
m3/h
1050
1050
1600
1600
Sound pressure level LpA
(1 m) at 50/60 Hz
dB
62
62
64
64
Max. cable length between converter and motor with standard insulation
(shielded)
m
150/3004)
150/3004)
150/3004)
150/3004)
Line/load connection
L1, L2, L3/U2, V2, W2
For connection cross-sections, see "Cable cross-sections and connections" in section "Configuring instructions"
Dimensions
Width
mm
350
350
500
500
Height (without mounting brackets)
mm
1060
1060
1060
1060
Depth
mm
320
320
320
320
Weight, approx.
kg
94
96
170
180
Approvals, according to
NRTL5)
NRTL5)
NRTL5)
NRTL5)
Frame size
K5
K5
K6
K6
1) Rated power of a typical 2- to 6-pole standard motor.
2) Typical output voltage dependent on filter and unit type.
3) Maximum power loss with continuous current.
4) Value is applicable with option L10 (strengthened dv/dt filter; strengthened filter is supplied separately with unit).
5) On request; the voltage range for NRTL units ends at max. 600 V.
skener.ru
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Àðìàòóðà DENDOR
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Äàò÷èêè è èçìåðèòåëè
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ðåãóëÿòîðû è ðåãèñòðàòîðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ïíåâìàòè÷åñêîå îáîðóäîâàíèå
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Êðàíû è Êëàïàíû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Èçìåðèòåëüíûå ïðèáîðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ñèñòåìû áåñïðîâîäíîãî óïðàâëåíèÿ «óìíûé äîì»
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Áåñêîíòàêòíûå âûêëþ÷àòåëè Êîíå÷íûå âûêëþ÷àòåëè Îïòè÷åñêèå äàò÷èêè Ýíêîäåðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Óñòàíîâêà óìÿã÷åíèÿ
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Óñòàíîâêà îáåçæåëåçèâàíèÿ
