|
| | | | | |
General technical specificationsPower Modules | PM240P-2 |
|---|
System operating voltage | 380 ... 480 V 3 AC ±10 % (in operation -20 % < 1 min) 500 ... 690 V 3 AC ±10 % (in operation -20 % < 1 min) | Grid requirement
Short-circuit power RSC | >25 | Input frequency | 47 ... 63 Hz | Output frequency | | | 0 ... 550 Hz | | 0 ... 200 Hz | Pulse frequency | | - At 380 ... 480 V 3 AC ±10 %
| up to 90 kW (121 hp) (LO): 4 kHz from 110 kW (148 hp) (LO): 2 kHz Higher pulse frequencies up to 16 kHz, see derating data | - At 500 ... 690 V 3 AC ±10 %
| 2 kHz, can be adjusted to 4 kHz | Power factor λ | 0.95 at 380 ... 480 V 3 AC 0.9 at 500 ... 690 V 3 AC | Offset factor cos φ | 0.99 | Inverter efficiency | >97 % at 380 ... 480 V 3 AC >98 % at 500 ... 690 V 3 AC | Output voltage, max. In % of input voltage | 95 % | Overload capability | | Note: When the overload capability is used, the base-load current IL is not reduced. | 1.35 × base-load current IL (i.e. 135 % overload) for 3 s plus 1.1 × base-load current IL (i.e. 110 % overload) for 57 s within a cycle time of 300 s | Note: When the overload capability is used, the base-load current IH is not reduced. | 1.5 × base-load current IH (i. e. 150 % overload) for 60 s within a cycle time of 300 s | Electromagnetic compatibility | - Devices without line filter
- Devices with line filter class A for compliance with conducted and radiated interference requirements of Category C2
| Possible braking methods | - DC braking
- Compound braking
| Degree of protection | IP20 | Operating temperature | | | -20 ... +40 °C (-4 ... +104 °F) without derating
>40 ... 60 °C (>104 ... 140 °F) see derating characteristics | | -20 ... +50 °C (-4 ... +122 °F) without derating
>50 ... 60 °C (>122 ... 140 °F) see derating characteristics | Relative humidity | 5 … 95 %, condensation not permitted | Storage temperature | -25 ... +55 °C (-13 ... +131 °F) | Cooling | Internal air cooling, power units with increased air cooling by built-in fans | Installation altitude | Up to 1000 m (3281 ft) above sea level without derating,
> 1000 m (3281 ft) see derating characteristics | Protection functions | - Undervoltage
- Overvoltage
- Overcurrent/overload
- Overtemperature
- Ground fault
- Short-circuit
- Stall protection
- Motor blocking protection
- Motor overtemperature
- Inverter overtemperature
- Parameter locking
| Short-Circuit Current Rating SCCR (Short-Circuit Current Rating) 1) | 65 kA | Compliance with standards | UL, cUL, CE, RCM, SEMI F47 | CE marking | According to Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU |
1) Applies to industrial control panel installations to NEC article 409 or UL 61800-5-1. PM240P-2 Power ModulesLine voltage 380 ... 480 V 3 AC | PM240P-2 Power Modules |
|---|
Without integrated line filter | 6SL3210-1RE24-5UL0 | 6SL3210-1RE26-0UL0 | 6SL3210-1RE27-5UL0 | 6SL3210-1RE28-8UL0 | 6SL3210-1RE31-1UL0 |
|---|
With integrated line filter | 6SL3210-1RE24-5AL0 | 6SL3210-1RE26-0AL0 | 6SL3210-1RE27-5AL0 | 6SL3210-1RE28-8AL0 | 6SL3210-1RE31-1AL0 |
|---|
Output current at 50 Hz 400 V 3 AC | | | | | | | | A | 45 | 60 | 75 | 90 | 110 | | A | 45 | 60 | 75 | 90 | 110 | | A | 38 | 45 | 60 | 75 | 90 | | A | 61 | 81 | 102 | 122 | 149 | Rated power | | | | | | | | kW | 22 | 30 | 37 | 45 | 55 | | kW | 18.5 | 22 | 30 | 37 | 45 | Rated pulse frequency | kHz | 4 | 4 | 4 | 4 | 4 | Efficiency η | % | 98 | 98 | 98 | 98 | 98 | Power loss 3) at rated current | | | | | | | - Without integrated line filter
| kW | 0.7 | 0.85 | 1.12 | 1.25 | 1.59 | - With integrated line filter
| kW | 0.71 | 0.85 | 1.12 | 1.28 | 1.63 | Cooling air requirement | m3/s (ft3/s) | 0.055 (1.94) | 0.055 (1.94) | 0.055 (1.94) | 0.083 (2.93) | 0.083 (2.93) | Sound pressure level LpA (1 m) | dB | 71.6 | 71.6 | 71.6 | 70.6 | 70.6 | 24 V DC power supply for Control Unit | A | 1 | 1 | 1 | 1 | 1 | Rated input current Irated4) | | 42 | 57 | 70 | 86 | 104 | Line supply connection U1/L1, V1/L2, W1/L3 | | Screw terminal | Screw terminal | Screw terminal | Screw terminal | Screw terminal | | mm2 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 25 ... 70 | 25 ... 70 | Motor connection U2, V2, W2 | | Screw terminal | Screw terminal | Screw terminal | Screw terminal | Screw terminal | | mm2 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 25 ... 70 | 25 ... 70 | Feedback connection F3, R1 | | Screw terminal | Screw terminal | Screw terminal | Screw terminal | Screw terminal | | mm2 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 25 ... 70 | 25 ... 70 | PE connection | | Screw terminal | Screw terminal | Screw terminal | Screw terminal | Screw terminal | | mm2 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 25 ... 70 | 25 ... 70 | Motor cable length 5), max. | | | | | | | | m (ft) | 200 (656) | 200 (656) | 200 (656) | 200 (656) | 200 (656) | | m (ft) | 300 (984) | 300 (984) | 300 (984) | 300 (984) | 300 (984) | Degree of protection | | IP20 | IP20 | IP20 | IP20 | IP20 | Dimensions | | | | | | | | mm (in) | 200 (7.87) | 200 (7.87) | 200 (7.87) | 275 (10.8) | 275 (10.8) | | mm (in) | 472 (18.6) | 472 (18.6) | 472 (18.6) | 551 (21.7) | 551 (21.7) | | | | | | | | | mm (in) | 237 (9.33) | 237 (9.33) | 237 (9.33) | 237 (9.33) | 237 (9.33) | - With Control Unit and operator panel, max.
| mm (in) | 274.5 (10.8) | 274.5 (10.8) | 274.5 (10.8) | 274.5 (10.8) | 274.5 (10.8) | Frame size | | FSD | FSD | FSD | FSE | FSE | Weight, approx. | | | | | | | - Without integrated line filter
| kg (lb) | 16.6 (36.6) | 18.3 (40.3) | 18.3 (40.3) | 26 (57.3) | 26 (57.3) | - With integrated line filter
| kg (lb) | 18.3 (40.3) | 19 (41.9) | 19 (41.9) | 28 (61.7) | 28 (61.7) |
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO). 2) The base-load current IH is based on the duty cycle for high overload (HO). 3) Maximum values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311 4) The input current depends on the motor load and line impedance. The input currents apply for rated power loading (based on Irated) for a line impedance corresponding to uK = 1 %. 5) The specified cable lengths apply to Power Modules without output option and without compliance with the limit values for RI suppression. Line voltage 380 ... 480 V 3 AC | PM240P-2 Power Modules |
|---|
Without integrated line filter | 6SL3210-1RE31-5UL0 | 6SL3210-1RE31-8UL0 | 6SL3210-1RE32-1UL0 | 6SL3210-1RE32-5UL0 |
|---|
With integrated line filter | 6SL3210-1RE31-5AL0 | 6SL3210-1RE31-8AL0 | 6SL3210-1RE32-1AL0 | 6SL3210-1RE32-5AL0 |
|---|
Output current at 50 Hz 400 V 3 AC | | | | | | | A | 145 | 178 | 205 | 250 | | A | 145 | 178 | 205 | 250 | | A | 110 | 145 | 178 | 205 | | A | 196 | 214 | 277 | 338 | Rated power | | | | | | | kW | 75 | 90 | 110 | 132 | | kW | 55 | 75 | 90 | 110 | Rated pulse frequency | kHz | 4 | 4 | 2 | 2 | Efficiency η | % | 98 | 98 | 98 | 98 | Power loss 3) at rated current | | | | | | - Without integrated line filter
| kW | 1.58 | 2.07 | 2.28 | 2.97 | - With integrated line filter
| kW | 1.6 | 2.1 | 2.31 | 3.01 | Cooling air requirement | m3/s (ft3/s) | 0.153 (5.40) | 0.153 (5.40) | 0.153 (5.40) | 0.153 (5.40) | Sound pressure level LpA (1 m) | dB | 67.7 | 67.7 | 67.7 | 67.7 | 24 V DC power supply for Control Unit | A | 1 | 1 | 1 | 1 | Rated input current Irated4) | A | 140 | 172 | 198 | 242 | Line supply connection U1/L1, V1/L2, W1/L3 | | M10 screw stud | M10 screw stud | M10 screw stud | M10 screw stud | | mm2 | 35 ... 120 | 35 ... 120 | 35 ... 120 | 35 ... 120 | Motor connection U2, V2, W2 | | M10 screw stud | M10 screw stud | M10 screw stud | M10 screw stud | | mm2 | 35 ... 120 | 35 ... 120 | 35 ... 120 | 35 ... 120 | Feedback connection F3, R1 | | M10 screw stud | M10 screw stud | M10 screw stud | M10 screw stud | | mm2 | 35 ... 2 x 120 | 35 ... 2 x 120 | 35 ... 2 x 120 | 35 ... 2 x 120 | PE connection | | M10 screw stud | M10 screw stud | M10 screw stud | M10 screw stud | | mm2 | 35 ... 120 | 35 ... 120 | 35 ... 120 | 35 ... 120 | Motor cable length 5), max. | | | | | | | m (ft) | 300 (984) | 300 (984) | 300 (984) | 300 (984) | | m (ft) | 450 (1476) | 450 (1476) | 450 (1476) | 450 (1476) | Degree of protection | | IP20 | IP20 | IP20 | IP20 | Dimensions | | | | | | | mm (in) | 305 (12.01) | 305 (12.01) | 305 (12.01) | 305 (12.01) | | mm (in) | 708 (27.9) | 708 (27.9) | 708 (27.9) | 708 (27.9) | | | | | | | | mm (in) | 357 (14.06) | 357 (14.06) | 357 (14.06) | 357 (14.06) | - With Control Unit and operator panel, max.
| mm (in) | 394.5 (15.5) | 394.5 (15.5) | 394.5 (15.5) | 394.5 (15.5) | Frame size | | FSF | FSF | FSF | FSF | Weight, approx. | | | | | | - Without integrated line filter
| kg (lb) | 57 (126) | 57 (126) | 61 (134) | 61 (134) | - With integrated line filter
| kg (lb) | 63 (139) | 63 (139) | 63 (139) | 63 (139) |
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO). 2) The base-load current IH is based on the duty cycle for high overload (HO). 3) Maximum values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311 4) The input current depends on the motor load and line impedance. The input currents apply for rated power loading (based on Irated) for a line impedance corresponding to uK = 1 %. 5) The specified cable lengths apply to Power Modules without output option and without compliance with the limit values for RI suppression. Line voltage 500 ... 690 V 3 AC | PM240P-2 Power Modules |
|---|
Without integrated line filter | 6SL3210-1RH21-4UL0 | 6SL3210-1RH22-0UL0 | 6SL3210-1RH22-3UL0 | 6SL3210-1RH22-7UL0 | 6SL3210-1RH23-5UL0 | 6SL3210-1RH24-2UL0 |
|---|
With integrated line filter | 6SL3210-1RH21-4AL0 | 6SL3210-1RH22-0AL0 | 6SL3210-1RH22-3AL0 | 6SL3210-1RH22-7AL0 | 6SL3210-1RH23-5AL0 | 6SL3210-1RH24-2AL0 |
|---|
Output current at 50 Hz 690 V 3 AC | | | | | | | | | A | 14 | 19 | 23 | 27 | 35 | 42 | | A | 14 | 19 | 23 | 27 | 35 | 42 | | A | 11 | 14 | 19 | 23 | 27 | 35 | | A | 19 | 26 | 32 | 37 | 48 | 57 | Rated power | | | | | | | | | kW | 11 | 15 | 18.5 | 22 | 30 | 37 | | kW | 7.5 | 11 | 15 | 18.5 | 22 | 30 | Rated pulse frequency | kHz | 2 | 2 | 2 | 2 | 2 | 2 | Efficiency η | % | 98 | 98 | 98 | 98 | 98 | 98 | Power loss 3) at rated current | | | | | | | | - Without integrated line filter
| kW | 0.36 | 0.45 | 0.52 | 0.61 | 0.77 | 0.94 | - With integrated line filter
| kW | 0.36 | 0.45 | 0.53 | 0.61 | 0.78 | 0.94 | Cooling air requirement | m3/s (ft3/s) | 0.055 (1.94) | 0.055 (1.94) | 0.055 (1.94) | 0.055 (1.94) | 0.055 (1.94) | 0.055 (1.94) | Sound pressure level LpA (1 m) | dB | 71.6 | 71.6 | 71.6 | 71.6 | 71.6 | 71.6 | 24 V DC power supply for Control Unit | A | 1 | 1 | 1 | 1 | 1 | 1 | Rated input current Irated4) | A | 14 | 18 | 22 | 25 | 33 | 40 | Line supply connection U1/L1, V1/L2, W1/L3 | | Screw-type terminal | Screw-type terminal | Screw-type terminal | Screw-type terminal | Screw-type terminal | Screw-type terminal | | mm2 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 10 ... 35 | Motor connection U2, V2, W2 | | Screw-type terminal | Screw-type terminal | Screw-type terminal | Screw-type terminal | Screw-type terminal | Screw-type terminal | | mm2 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 10 ... 35 | Feedback connection F3, R1 | | Screw-type terminal | Screw-type terminal | Screw-type terminal | Screw-type terminal | Screw-type terminal | Screw-type terminal | | mm2 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 10 ... 35 | PE connection | | Screw-type terminal | Screw-type terminal | Screw-type terminal | Screw-type terminal | Screw-type terminal | Screw-type terminal | | mm2 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 10 ... 35 | 10 ... 35 | Motor cable length 5), max. | | | | | | | | | m (ft) | 200 (656) | 200 (656) | 200 (656) | 200 (656) | 200 (656) | 200 (656) | | m (ft) | 300 (984) | 300 (984) | 300 (984) | 300 (984) | 300 (984) | 300 (984) | Degree of protection | | IP20 | IP20 | IP20 | IP20 | IP20 | IP20 | Dimensions | | | | | | | | | mm (in) | 200 (7.87) | 200 (7.87) | 200 (7.87) | 200 (7.87) | 200 (7.87) | 200 (7.87) | | mm (in) | 472 (18.6) | 472 (18.6) | 472 (18.6) | 472 (18.6) | 472 (18.6) | 472 (18.6) | | | | | | | | | | mm (in) | 237 (9.33) | 237 (9.33) | 237 (9.33) | 237 (9.33) | 237 (9.33) | 237 (9.33) | - With Control Unit and operator panel, max.
| mm (in) | 274.5 (10.8) | 274.5 (10.8) | 274.5 (10.8) | 274.5 (10.8) | 274.5 (10.8) | 274.5 (10.8) | Frame size | | FSD | FSD | FSD | FSD | FSD | FSD | Weight, approx. | | | | | | | | - Without integrated line filter
| kg (lb) | 17.4 (38.4) | 17.4 (38.4) | 17.4 (38.4) | 17.4 (38.4) | 17.4 (38.4) | 17.4 (38.4) | - With integrated line filter
| kg (lb) | 18.9 (41.7) | 18.9 (41.7) | 18.9 (41.7) | 18.9 (41.7) | 18.9 (41.7) | 18.9 (41.7) |
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO). 2) The base-load current IH is based on the duty cycle for high overload (HO). 3) Maximum values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311 4) The input current depends on the motor load and line impedance. The input currents apply for rated power loading (based on Irated) for a line impedance corresponding to uK = 1 %. 5) The specified cable lengths apply to Power Modules without output option and without compliance with the limit values for RI suppression. Line voltage 500 ... 690 V 3 AC | PM240P-2 Power Modules |
|---|
Without integrated line filter | 6SL3210-1RH25-2UL0 | 6SL3210-1RH26-2UL0 | 6SL3210-1RH28-0UL0 | 6SL3210-1RH31-0UL0 | 6SL3210-1RH31-2UL0 | 6SL3210-1RH31-4UL0 |
|---|
With integrated line filter | 6SL3210-1RH25-2AL0 | 6SL3210-1RH26-2AL0 | 6SL3210-1RH28-0AL0 | 6SL3210-1RH31-0AL0 | 6SL3210-1RH31-2AL0 | 6SL3210-1RH31-4AL0 |
|---|
Output current at 50 Hz 690 V 3 AC | | | | | | | | | A | 52 | 62 | 80 | 100 | 115 | 142 | | A | 52 | 62 | 80 | 100 | 115 | 142 | | A | 42 | 52 | 62 | 80 | 100 | 115 | | A | 71 | 84 | 108 | 135 | 156 | 192 | Rated power | | | | | | | | | kW | 45 | 55 | 75 | 90 | 110 | 132 | | kW | 37 | 45 | 55 | 75 | 90 | 110 | Rated pulse frequency | kHz | 2 | 2 | 2 | 2 | 2 | 2 | Efficiency η | % | 99 | 99 | 99 | 99 | 99 | 99 | Power loss 3) at rated current | | | | | | | | - Without integrated line filter
| kW | 1.08 | 1.3 | 1.37 | 1.75 | 1.95 | 2.49 | - With integrated line filter
| kW | 1.09 | 1.31 | 1.38 | 1.76 | 1.97 | 2.51 | Cooling air requirement | m3/s (ft3/s) | 0.055 (1.94) | 0.055 (1.94) | 0.055 (1.94) | 0.055 (1.94) | 0.055 (1.94) | 0.055 (1.94) | Sound pressure level LpA (1 m) | dB | 70.6 | 70.6 | 67.7 | 67.7 | 67.7 | 67.7 | 24 V DC power supply for Control Unit | A | 1 | 1 | 1 | 1 | 1 | 1 | Rated input current Irated4) | A | 50 | 59 | 78 | 97 | 111 | 137 | Line supply connection U1/L1, V1/L2, W1/L3 | | Screw-type terminal | Screw-type terminal | M10 screw stud | M10 screw stud | M10 screw stud | M10 screw stud | | mm2 | 25 ... 70 | 25 ... 70 | 35 ... 120 | 35 ... 120 | 35 ... 120 | 35 ... 120 | Motor connection U2, V2, W2 | | Screw-type terminal | Screw-type terminal | M10 screw stud | M10 screw stud | M10 screw stud | M10 screw stud | | mm2 | 25 ... 70 | 25 ... 70 | 35 ... 120 | 35 ... 120 | 35 ... 120 | 35 ... 120 | Feedback connection F3, R1 | | Screw-type terminal | Screw-type terminal | M10 screw stud | M10 screw stud | M10 screw stud | M10 screw stud | | mm2 | 25 ... 70 | 25 ... 70 | 35 ... 2 x 120 | 35 ... 2 x 120 | 35 ... 2 x 120 | 35 ... 2 x 120 | PE connection | | Screw-type terminal | Screw-type terminal | M10 screw stud | M10 screw stud | M10 screw stud | M10 screw stud | | mm2 | 25 ... 70 | 25 ... 70 | 35 ... 120 | 35 ... 120 | 35 ... 120 | 35 ... 120 | Motor cable length 5), max. | | | | | | | | | m (ft) | 200 (656) | 200 (656) | 300 (984) | 300 (984) | 300 (984) | 300 (984) | | m (ft) | 300 (984) | 300 (984) | 450 (1476) | 450 (1476) | 450 (1476) | 450 (1476) | Degree of protection | | IP20 | IP20 | IP20 | IP20 | IP20 | IP20 | Dimensions | | | | | | | | | mm (in) | 275 (10.8) | 275 (10.8) | 305 (12.01) | 305 (12.01) | 305 (12.01) | 305 (12.01) | | mm (in) | 551 (21.7) | 551 (21.7) | 708 (27.9) | 708 (27.9) | 708 (27.9) | 708 (27.9) | | | | | | | | | | mm (in) | 237 (9.33) | 237 (9.33) | 357 (14.1) | 357 (14.1) | 357 (14.1) | 357 (14.1) | - With Control Unit and operator panel, max.
| mm (in) | 274.5 (10.8) | 274.5 (10.8) | 394.5 (15.5) | 394.5 (15.5) | 394.5 (15.5) | 394.5 (15.5) | Frame size | | FSE | FSE | FSF | FSF | FSF | FSF | Weight, approx. | | | | | | | | - Without integrated line filter
| kg (lb) | 26 (57.3) | 26 (57.3) | 60 (132) | 60 (132) | 60 (132) | 60 (132) | - With integrated line filter
| kg (lb) | 28 (61.7) | 28 (61.7) | 64 (141) | 64 (141) | 64 (141) | 64 (141) |
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO). 2) The base-load current IH is based on the duty cycle for high overload (HO). 3) Maximum values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311 4) The input current depends on the motor load and line impedance. The input currents apply for rated power loading (based on Irated) for a line impedance corresponding to uK = 1 %. 5) The specified cable lengths apply to Power Modules without output option and without compliance with the limit values for RI suppression.
|
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Àðìàòóðà DENDOR
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Äàò÷èêè è èçìåðèòåëè
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ðåãóëÿòîðû è ðåãèñòðàòîðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ïíåâìàòè÷åñêîå îáîðóäîâàíèå
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Êðàíû è Êëàïàíû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Èçìåðèòåëüíûå ïðèáîðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ñèñòåìû áåñïðîâîäíîãî óïðàâëåíèÿ «óìíûé äîì»
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Áåñêîíòàêòíûå âûêëþ÷àòåëè Êîíå÷íûå âûêëþ÷àòåëè Îïòè÷åñêèå äàò÷èêè Ýíêîäåðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Óñòàíîâêà óìÿã÷åíèÿ
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Óñòàíîâêà îáåçæåëåçèâàíèÿ
|
