System operating voltage

380 ... 480 V ±10 % 3 AC

Grid requirement
Short-circuit power R_SC

>25

>100 line reactor recommended

Input frequency

47 ... 63 Hz

Output frequency

• Control mode V/f

0 ... 550 Hz

• Control type Vector

0 ... 240 Hz

Pulse frequency

75 kW (HO): 4 kHz

as of 90 kW (HO): 2 kHz

Higher pulse frequencies up to 16 kHz, see derating data

Power factor ?

0.7 ... 0.85

Offset factor cos ?

0.95

Inverter efficiency

95 ... 98 %

Output voltage, max.

As % of input voltage

95%

Overload capability

• Low overload
  (LO)

Note:

When the overload capability is used, the base-load current I_L is not reduced.

90 kW (LO):
1.5 ? base-load current I_L (i. e. 150 % overload) for 3 s plus 1.1 ? base-load current I_L (i. e. 110 % overload) for 57 s within a cycle time of 300 s

110 kW and higher (LO):
1.5 ? base-load current I_L (i. e. 150 % overload) for 1 s plus 1.1 ? base-load current I_L (i. e. 110 % overload) for 59 s within a cycle time of 300 s

• High overload
  (HO)

Note:

When the overload capability is used, the base-load current I_H is not reduced.

75 kW (HO):
2 ? base-load current I_H (i. e. 20 % overload) for 3 s plus 1.5 ? base-load current I_H (i. e. 150 % overload) for 57 s within a cycle time of 300 s

90 kW and higher (HO):
1.6 ? base-load current I_H (i. e. 160 % overload) for 3 s plus 1.36 ? base-load current I_H (i. e. 136 % overload) for 57 s within a cycle time of 300 s

Electromagnetic compatibility

• Devices without line filter
• Devices with line filter class A for compliance with conducted and radiated interference requirements of Category C2

Possible braking methods

• DC braking
• Dynamic braking with integrated braking module

Degree of protection

IP20

Operating temperature

• Low overload
  (LO)

0 ... 40 °C (32 ... 104 °F) without derating
>40 ... 60 °C (>104 ... 140 °F) see derating characteristics

• High overload
  (HO)

0 ... 50 °C (32 ... 122 °F) without derating
>50 ... 60 °C (>122 ... 140 °F) see derating characteristics

Storage temperature

-40 ... +70 °C (-40 ... +158 °F)

Relative humidity

<95 %, condensation not permissible

Cooling

Internal ventilation, power units with increased air cooling by built-in fans

Installation altitude

Up to 1000 m (3281 ft) above sea level without derating,
> 1000 m (3281 ft) see derating characteristics

Protection functions

• Undervoltage
• Overvoltage
• Overcurrent/overload
• Overtemperature
• Ground fault
• Short-circuit
• Stall protection
• Motor blocking protection
• Motor overtemperature
• Inverter overtemperature
• Parameter locking

Short-Circuit Current Rating SCCR

(Short-Circuit Current Rating) ¹⁾

65 kA

Compliance with standards

UL, cUL, CE, RCM, SEMI F47

CE marking

According to Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU

Output current

at 50 Hz 400 V 3 AC

• Rated current I_rated¹⁾

A

178

205

250

• Base-load current I_L¹⁾

A

178

205

250

• Base-load current I_H²⁾

A

145

178

205

• Maximum current I_max

A

290

308

375

Rated power

• Based on I_L

kW (hp)

90 (125)

110 (148)

132 (200)

• Based on I_H

kW (hp)

75 (100)

90 (125)

110 (148)

Rated pulse frequency

kHz

4

2

2

Efficiency ?

>0.97

>0.97

>0.97

Power loss ³⁾

at rated current

kW

2.376

2.274

2.964

Cooling air requirement

m³/s (ft³/s)

0.15 (5.3)

0.15 (5.3)

0.15 (5.3)

Sound pressure level

L_pA (1 m/3.28 ft)

dB

<65

<65

<65

24 V DC power supply

for Control Unit

A

1

1

1

Rated input current ⁴⁾

• With line reactor

A

186

210

250

• Without line reactor

A

204

245

299

Length of cable to braking resistor, max.

m (ft)

15 (49)

15 (49)

15 (49)

Line supply connection

U1/L1, V1/L2, W1/L3

M8 screw studs

M8 screw studs

M8 screw studs

• Conductor cross-section

mm²

25 ... 120

25 ... 120

25 ... 120

Motor connection

U2, V2, W2

M8 screw studs

M8 screw studs

M8 screw studs

• Conductor cross-section

mm²

25 ... 120

25 ... 120

25 ... 120

DC link connection, connection for braking resistor

DCP/R1, DCN, R2

M8 screw studs

M8 screw studs

M8 screw studs

• Conductor cross-section

mm²

25 ... 120

25 ... 120

25 ... 120

PE connection

On housing with M8 screw

On housing with M8 screw

On housing with M8 screw

Motor cable length ⁵⁾, max.

• Shielded

m (ft)

50 (164)

50 (164)

50 (164)

• Unshielded

m (ft)

100 (328)

100 (328)

100 (328)

Degree of protection

IP20

IP20

IP20

Dimensions

• Width

mm (in)

350 (13.78)

350 (13.78)

350 (13.78)

• Height

• Without integrated line filter

mm (in)

634 (24.96)

634 (24.96)

634 (24.96)

• With integrated line filter

mm (in)

934 (36.77)

–

–

• Depth

• Without operator panel

mm (in)

316 (12.44)

316 (12.44)

316 (12.44)

• With operator panel, max.

mm (in)

387 (15.24)

387 (15.24)

387 (15.24)

Frame size

FSF

FSF

FSF

Weight, approx.

• Without integrated line filter

kg (lb)

36 (79.4)

39 (86)

39 (86)

• With integrated line filter

kg (lb)

52 (115)

–

–