|
| | | | | |
General technical specifications | PM230 Power Modules |
|---|
Degree of protection | IP55 (with IOP‑2, BOP‑2 or blanking cover) | IP20/UL Open Type
(Standard or Push Through variants) | Power (low overload LO) | 0.37 ... 90 kW | 0.37 ... 75 kW | Rated output current (low overload LO) | 1.3 ... 178 A | 1.3 ... 145 A | Power (high overload HO) | 0.25 ... 75 kW | 0.25 ... 55 kW | Rated output current (high overload HO) | 0.9 ... 145 A | 0.9 ... 110 A | System operating voltage | 380 ... 480 V 3 AC ±10 % | Grid requirement
Short-circuit power RSC | >100 | Input frequency | 47 ... 63 Hz | Output frequency | | | 0 ... 550 Hz | | 0 ... 240 Hz | Pulse frequency | 4 kHz
for higher pulse frequencies up to 16 kHz, see derating data | Power factor λ | 0.9 | Offset factor cos φ | 0.95 | Inverter efficiency | ≤97 % | Output voltage, max. as % of input voltage | 95 % | Overload capability | | | Note: When the overload capability is used, the base-load current IL is not reduced. | | 1.5 × base-load current IL (i. e. 150 % overload) for 3 s plus
1.1 × base-load current IL (i. e. 110 % overload) for 57 s within a cycle time of 300 s | | 1.1 × base-load current IL (i. e. 110 % overload) for 60 s within a cycle time of 300 s | | Note: When the overload capability is used, the base-load current IH is not reduced. | | 2 × base-load current IH (i. e. 200 % overload) for 3 s plus
1.5 × base-load current IH (i. e. 150 % overload) for 57 s within a cycle time of 300 s | | 1.5 × base-load current IH (i. e. 150 % overload) for 60 s within a cycle time of 300 s | Electromagnetic compatibility | - Devices with line filter class A for applications according to Categories C3 and C2
- Devices with line filter class B for applications according to Category C2 and compliance with conducted interference requirements of Category C1
| - Devices without line filter
- Devices with line filter class A for applications according to Categories C3 and C2
- Devices with line filter class B for applications according to Category C2 and compliance with conducted interference requirements of Category C1
| Possible braking methods | DC braking | Operating temperature | | | Frame sizes FSA to FSC: -10 ... +40 °C (14 ... 104 °F) without derating
Frame sizes FSD to FSF: 0 ... 40 °C (32 ... 104 °F) without derating >40 ... 60 °C (104 ... 140 °F) see derating characteristics | | Frame sizes FSA to FSC: -10 ... +50 °C (14 ... 122 °F) without derating
Frame sizes FSD to FSF: 0 ... 50 °C (32 ... 122 °F) without derating >50 ... 60 °C (122 ... 140 °F) see derating characteristics | Relative humidity | <95 %, condensation not permissible | Storage temperature | -40 ... +70 °C (-40 ... +158 °F) | Cooling | Power units with increased air cooling using integrated fans | Installation altitude | Up to 1000 m (3281 ft) above sea level without derating,
> 1000 m (3281 ft) see derating characteristics | Protection functions | - Undervoltage
- Overvoltage
- Overcurrent/overload
- Overtemperature
- Ground fault
- Short-circuit
- Stall protection
- Motor blocking protection
- Motor overtemperature
- Inverter overtemperature
- Parameter locking
| Rated short-circuit current SCCR (Short-Circuit Current Rating) 3) | Frame sizes FSA to FSC: 40 kA | 65 kA | Compliance with standards | UL 1), cUL 2), CE, RCM, SEMI F47 | CE marking | According to Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU |
1) For degree of protection IP55/UL Type 12, the UL approval only applies to frame sizes FSA to FSC. 2) Applies to PM230 Power Modules, frame sizes FSA to FSC. 3) Applies to industrial control panel installations acc. to NEC Article 409 or UL 508A/508C. PM230 Power Modules, degree of protection IP55Line voltage 380 ... 480 V 3 AC | PM230 Power Modules, degree of protection IP55/UL Type 12 |
|---|
With integrated line filter class A | 6SL3223-0DE13-7AG1 | 6SL3223-0DE15-5AG1 | 6SL3223-0DE17-5AG1 | 6SL3223-0DE21-1AG1 | 6SL3223-0DE21-5AG1 |
|---|
With integrated line filter class B | 6SL3223-0DE13-7BG1 | 6SL3223-0DE15-5BG1 | 6SL3223-0DE17-5BG1 | 6SL3223-0DE21-1BG1 | 6SL3223-0DE21-5BG1 |
|---|
Output current at 50 Hz 400 V 3 AC | | | | | | | | A | 1.3 | 1.7 | 2.2 | 3.1 | 4.1 | | A | 1.3 | 1.7 | 2.2 | 3.1 | 4.1 | | A | 0.9 | 1.3 | 1.7 | 2.2 | 3.1 | | A | 2 | 2.6 | 3.4 | 4.7 | 6.2 | Rated power | | | | | | | | kW | 0.37 | 0.55 | 0.75 | 1.1 | 1.5 | | kW | 0.25 | 0.37 | 0.55 | 0.75 | 1.1 | Rated pulse frequency | kHz | 4 | 4 | 4 | 4 | 4 | Efficiency η | % | 86 | 90 | 92 | 94 | 95 | Power loss 3) at rated current | kW | 0.04 | 0.043 | 0.047 | 0.055 | 0.064 | Cooling air requirement | m3/s (ft3/s) | 0.007 (0.25) | 0.007 (0.25) | 0.007 (0.25) | 0.007 (0.25) | 0.007 (0.25) | Sound pressure level LpA (1 m) | dB | 61.9 | 61.9 | 61.9 | 61.9 | 61.9 | 24 V DC power supply for Control Unit | A | 1 | 1 | 1 | 1 | 1 | Input current 4) | | | | | | | | A | 1.3 | 1.8 | 2.3 | 3.2 | 4.2 | | A | 0.9 | 1.3 | 1.8 | 2.3 | 3.2 | Line supply connection U1/L1, V1/L2, W1/L3 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | | mm2 | 1 ... 2.5 | 1 ... 2.5 | 1 ... 2.5 | 1 ... 2.5 | 1 ... 2.5 | Motor connection U2, V2, W2 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | | mm2 | 1 ... 2.5 | 1 ... 2.5 | 1 ... 2.5 | 1 ... 2.5 | 1 ... 2.5 | Motor cable length, max. 5) | | | | | | | | m (ft) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | | m (ft) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | Degree of protection 6) | | IP55/UL Type 12 | IP55/UL Type 12 | IP55/UL Type 12 | IP55/UL Type 12 | IP55/UL Type 12 | Dimensions | | | | | | | | mm (in) | 154 (6.06) | 154 (6.06) | 154 (6.06) | 154 (6.06) | 154 (6.06) | | mm (in) | 460 (18.11) | 460 (18.11) | 460 (18.1) | 460 (18.11) | 460 (18.1) | | | | | | | | | mm (in) | 249 (9.80) | 249 (9.80) | 249 (9.80) | 249 (9.80) | 249 (9.80) | - With operator panel, max.
| mm (in) | 266 (10.47) | 266 (10.47) | 266 (10.47) | 266 (10.47) | 266 (10.47) | Frame size | | FSA | FSA | FSA | FSA | FSA | Weight, approx. | kg (lb) | 4.3 (9.48) | 4.3 (9.48) | 4.3 (9.48) | 4.3 (9.48) | 4.3 (9.48) |
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO). 2) The base-load current IH is based on the duty cycle for high overload (HO). 3) Typical values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311 4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate. 5) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values of EN 61800‑3 Category C2 (filter A) or C1 table 14 (filter B). With unshielded cables, Categories C2 and C1 are not achieved. 6) It is essential to plug on an operator panel or the blanking cover in order to achieve degree of protection IP55/UL Type 12. For more information, see Operator panels and blanking cover for PM230 Power Modules in section Supplementary system components. Line voltage 380 ... 480 V 3 AC | PM230 Power Modules, degree of protection IP55/UL Type 12 |
|---|
With integrated line filter class A | 6SL3223-0DE22-2AG1 | 6SL3223-0DE23-0AG1 | 6SL3223-0DE24-0AG1 | 6SL3223-0DE25-5AG1 | 6SL3223-0DE27-5AG1 |
|---|
With integrated line filter class B | 6SL3223-0DE22-2BG1 | 6SL3223-0DE23-0BG1 | 6SL3223-0DE24-0BG1 | 6SL3223-0DE25-5BG1 | 6SL3223-0DE27-5BG1 |
|---|
Output current at 50 Hz 400 V 3 AC | | | | | | | | A | 5.9 | 7.7 | 10.2 | 13.2 | 18 | | A | 5.9 | 7.7 | 10.2 | 13.2 | 18 | | A | 4.1 | 5.9 | 7.7 | 10.2 | 13.2 | | A | 8.9 | 11.8 | 15.4 | 20.4 | 27 | Rated power | | | | | | | | kW | 2.2 | 3 | 4 | 5.5 | 7.5 | | kW | 1.5 | 2.2 | 3 | 4 | 5.5 | Rated pulse frequency | kHz | 4 | 4 | 4 | 4 | 4 | Efficiency η | % | 96 | 96 | 97 | 97 | 97 | Power loss 3) at rated current | kW | 0.086 | 0.11 | 0.137 | 0.173 | 0.235 | Cooling air requirement | m3/s (ft3/s) | 0.007 (0.25) | 0.007 (0.25) | 0.009 (0.32) | 0.009 (0.32) | 0.009 (0.32) | Sound pressure level LpA (1 m) | dB | 61.9 | 61.9 | 62.8 | 62.8 | 62.8 | 24 V DC power supply for Control Unit | A | 1 | 1 | 1 | 1 | 1 | Input current 4) | | | | | | | | A | 6.1 | 8 | 11 | 14 | 19 | | A | 4.2 | 6.1 | 8 | 11 | 14 | Line supply connection U1/L1, V1/L2, W1/L3 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | | mm2 | 1 ... 2.5 | 1 ... 2.5 | 2.5 ... 6 | 4 ... 6 | 4 ... 6 | Motor connection U2, V2, W2 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | | mm2 | 1 ... 2.5 | 1 ... 2.5 | 2.5 ... 6 | 4 ... 6 | 4 ... 6 | Motor cable length, max. 5) | | | | | | | | m (ft) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | | m (ft) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | Degree of protection 6) | | IP55/UL Type 12 | IP55/UL Type 12 | IP55/UL Type 12 | IP55/UL Type 12 | IP55/UL Type 12 | Dimensions | | | | | | | | mm (in) | 154 (6.06) | 154 (6.06) | 180 (7.09) | 180 (7.09) | 180 (7.09) | | mm (in) | 460 (18.11) | 460 (18.11) | 540 (21.26) | 540 (21.26) | 540 (21.26) | | | | | | | | | mm (in) | 249 (9.80) | 249 (9.80) | 249 (9.80) | 249 (9.80) | 249 (9.80) | - With operator panel, max.
| mm (in) | 266 (10.47) | 266 (10.47) | 266 (10.47) | 266 (10.47) | 266 (10.47) | Frame size | | FSA | FSA | FSB | FSB | FSB | Weight, approx. | kg (lb) | 4.3 (9.48) | 4.3 (9.48) | 6.3 (13.9) | 6.3 (13.9) | 6.3 (13.9) |
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO). 2) The base-load current IH is based on the duty cycle for high overload (HO). 3) Typical values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311 4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate. 5) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values of EN 61800‑3 Category C2 (filter A) or C1 table 14 (filter B). With unshielded cables, Categories C2 and C1 are not achieved. 6) It is essential to plug on an operator panel or the blanking cover in order to achieve degree of protection IP55/UL Type 12. For more information, see Operator panels and blanking cover for PM230 Power Modules in section Supplementary system components. Line voltage 380 ... 480 V 3 AC | PM230 Power Modules, degree of protection IP55/UL Type 12 1) |
|---|
With integrated line filter class A | 6SL3223-0DE31-1AG1 | 6SL3223-0DE31-5AG1 | 6SL3223-0DE31-8AG1 | – | 6SL3223-0DE32-2AA0 | 6SL3223-0DE33-0AA0 |
|---|
With integrated line filter class B | 6SL3223-0DE31-1BG1 | 6SL3223-0DE31-5BG1 | – | 6SL3223-0DE31-8BA0 | 6SL3223-0DE32-2BA0 | 6SL3223-0DE33-0BA0 |
|---|
Output current at 50 Hz 400 V 3 AC | | | | | | | | | A | 26 | 32 | 38 | 38 | 45 | 60 | | A | 26 | 32 | 38 | 38 | 45 | 60 | | A | 18 | 26 | 32 | 32 | 38 | 45 | | A | 39 | 52 | 64 | 48 | 57 | 67 | Rated power | | | | | | | | | kW | 11 | 15 | 18.5 | 18.5 | 22 | 30 | | kW | 7.5 | 11 | 15 | 15 | 18.5 | 22 | Rated pulse frequency | kHz | 4 | 4 | 4 | 4 | 4 | 4 | Efficiency η | % | 97 | 97 | 98 | 97 | 97 | 97 | Power loss 4) at rated current | kW | 0.299 | 0.365 | 0.435 | 0.478 | 0.569 | 0.784 | Cooling air requirement | m3/s (ft3/s) | 0.02 (0.7) | 0.02 (0.7) | 0.02 (0.7) | 0.039 (1.4) | 0.039 (1.4) | 0.039 (1.4) | Sound pressure level LpA (1 m) | dB | 66.1 | 66.1 | 66.1 | 56 | 56 | 56 | 24 V DC power supply for Control Unit | A | 1 | 1 | 1 | 1 | 1 | 1 | Input current 5) | | | | | | | | | A | 27 | 33 | 39 | 39 | 42 | 56 | | A | 19 | 27 | 33 | 33 | 36 | 42 | Line supply connection U1/L1, V1/L2, W1/L3 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | M6 screw studs | M6 screw studs | M6 screw studs | | mm2 | 6 ... 16 | 10 ... 16 | 10 ... 16 | 16 ... 35 | 16 ... 35 | 16 ... 35 | Motor connection U2, V2, W2 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | M6 screw studs | M6 screw studs | M6 screw studs | | mm2 | 6 ... 16 | 10 ... 16 | 10 ... 16 | 16 ... 35 | 16 ... 35 | 16 ... 35 | Motor cable length, max. 6) | | | | | | | | | m (ft) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | | m (ft) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | Degree of protection 7) | | IP55/UL Type 12 | IP55/UL Type 12 | IP55/UL Type 12 | IP55 | IP55 | IP55 | Dimensions | | | | | | | | | mm (in) | 230 (9.06) | 230 (9.06) | 230 (9.06) | 320 (12.60) | 320 (12.60) | 320 (12.60) | | mm (in) | 620 (24.41) | 620 (24.41) | 620 (24.41) | 640 (25.20) | 640 (25.20) | 640 (25.20) | | | | | | | | | | mm (in) | 249 (9.80) | 249 (9.80) | 249 (9.80) | 329 (12.95) | 329 (12.95) | 329 (12.95) | - With operator panel, max.
| mm (in) | 266 (10.47) | 266 (10.47) | 266 (10.47) | 346 (13.62) | 346 (13.62) | 346 (13.62) | Frame size | | FSC | FSC | FSC | FSD | FSD | FSD | Weight, approx. | kg (lb) | 9.5 (20.95) | 9.5 (20.95) | 9.5 (20.95) | 31 (68.36) | 31 (68.36) | 31 (68.36) |
1) UL Type 12 only for frame size FSC 2) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO). 3) The base-load current IH is based on the duty cycle for high overload (HO). 4) Typical values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311 5) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate. 6) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values of EN 61800‑3 Category C2 (filter A) or C1 table 14 (filter B). With unshielded cables, Categories C2 and C1 are not achieved. 7) It is essential to plug on an operator panel or the blanking cover in order to achieve degree of protection IP55/UL Type 12. For more information, see Operator panels and blanking cover for PM230 Power Modules in section Supplementary system components. Line voltage 380 ... 480 V 3 AC | PM230 Power Modules, degree of protection IP55 |
|---|
With integrated line filter class A | 6SL3223-0DE33-7AA0 | 6SL3223-0DE34-5AA0 | 6SL3223-0DE35-5AA0 | 6SL3223-0DE37-5AA0 | 6SL3223-0DE38-8AA0 |
|---|
With integrated line filter class B | 6SL3223-0DE33-7BA0 | 6SL3223-0DE34-5BA0 | 6SL3223-0DE35-5BA0 | 6SL3223-0DE37-5BA0 | 6SL3223-0DE38-8BA0 |
|---|
Output current at 50 Hz 400 V 3 AC | | | | | | | | A | 75 | 90 | 110 | 145 | 178 | | A | 75 | 90 | 110 | 145 | 178 | | A | 60 | 75 | 90 | 110 | 145 | | A | 90 | 112 | 135 | 165 | 217 | Rated power | | | | | | | | kW | 37 | 45 | 55 | 75 | 90 | | kW | 30 | 37 | 45 | 55 | 75 | Rated pulse frequency | kHz | 4 | 4 | 4 | 4 | 4 | Efficiency η | % | 97 | 97 | 97 | 97 | 97 | Power loss 3) at rated current | kW | 0.855 | 1.073 | 1.122 | 1.542 | 1.98 | Cooling air requirement | m3/s (ft3/s) | 0.039 (1.4) | 0.039 (1.4) | 0.117 (4.1) | 0.117 (4.1) | 0.117 (4.1) | Sound pressure level LpA (1 m) | dB | 56 | 56 | 61 | 61 | 61 | 24 V DC power supply for Control Unit | A | 1 | 1 | 1 | 1 | 1 | Input current 4) | | | | | | | | A | 70 | 84 | 102 | 135 | 166 | | A | 56 | 70 | 84 | 102 | 135 | Line supply connection U1/L1, V1/L2, W1/L3 | | M6 screw studs | M6 screw studs | M8 screw studs | M8 screw studs | M8 screw studs | | mm2 | 25 ... 50 | 25 ... 50 | 35 ... 120 | 35 ... 120 | 35 ... 120 | Motor connection U2, V2, W2 | | M6 screw studs | M6 screw studs | M8 screw studs | M8 screw studs | M8 screw studs | | mm2 | 25 ... 50 | 25 ... 50 | 35 ... 120 | 35 ... 120 | 35 ... 120 | Motor cable length, max. 5) | | | | | | | | m (ft) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | | m (ft) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | Degree of protection 6) | | IP55 | IP55 | IP55 | IP55 | IP55 | Dimensions | | | | | | | | mm (in) | 320 (12.60) | 320 (12.60) | 410 (16.14) | 410 (16.14) | 410 (16.14) | | mm (in) | 751 (29.57) | 751 (29.57) | 915 (36.02) | 915 (36.02) | 915 (36.02) | | | | | | | | | mm (in) | 329 (12.95) | 329 (12.95) | 416 (16.38) | 416 (16.38) | 416 (16.38) | - With operator panel, max.
| mm (in) | 346 (13.62) | 346 (13.62) | 433 (17.05) | 433 (17.05) | 433 (17.05) | Frame size | | FSE | FSE | FSF | FSF | FSF | Weight, approx. | kg (lb) | 37 (81.6) (with filter cl. A)
38 (83.8) (with filter cl. B) | 37 (81.6) (with filter cl. A)
38 (83.8) (with filter cl. B) | 70 (154) | 70 (154) | 70 (154) |
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO). 2) The base-load current IH is based on the duty cycle for high overload (HO). 3) Typical values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311 4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate. 5) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values of EN 61800‑3 Category C2 (filter A) or C1 table 14 (filter B). With unshielded cables, Categories C2 and C1 are not achieved. 6) It is essential to plug on an operator panel or the blanking cover in order to achieve degree of protection IP55. For more information, see Operator panels and blanking cover for PM230 Power Modules in section Supplementary system components. PM230 Power Modules degree of protection IP20 Standard variantLine voltage 380 ... 480 V 3 AC | PM230 Power Modules degree of protection IP20 Standard variant |
|---|
Without integrated line filter | 6SL3210-1NE11-3UG1 | 6SL3210-1NE11-7UG1 | 6SL3210-1NE12-2UG1 | 6SL3210-1NE13-1UG1 | 6SL3210-1NE14-1UG1 |
|---|
With integrated line filter class A | 6SL3210-1NE11-3AG1 | 6SL3210-1NE11-7AG1 | 6SL3210-1NE12-2AG1 | 6SL3210-1NE13-1AG1 | 6SL3210-1NE14-1AG1 |
|---|
Output current at 50 Hz 400 V 3 AC | | | | | | | | A | 1.3 | 1.7 | 2.2 | 3.1 | 4.1 | | A | 1.3 | 1.7 | 2.2 | 3.1 | 4.1 | | A | 0.9 | 1.3 | 1.7 | 2.2 | 3.1 | | A | 2 | 2.6 | 3.4 | 4.7 | 6.2 | Rated power | | | | | | | | kW | 0.37 | 0.55 | 0.75 | 1.1 | 1.5 | | kW | 0.25 | 0.37 | 0.55 | 0.75 | 1.1 | Rated pulse frequency | kHz | 4 | 4 | 4 | 4 | 4 | Efficiency η | % | 89 | 93 | 93 | 94 | 95 | Power loss 3) at rated current | kW | 0.031 | 0.034 | 0.041 | 0.049 | 0.06 | Cooling air requirement | m3/s (ft3/s) | 0.002 (0.1) | 0.002 (0.1) | 0.005 (0.2) | 0.005 (0.2) | 0.005 (0.2) | Sound pressure level LpA (1 m) | dB | <50 | <50 | <50 | <50 | <50 | 24 V DC power supply for Control Unit | A | 1 | 1 | 1 | 1 | 1 | Input current 4) | | | | | | | | A | 1.3 | 1.8 | 2.3 | 3.2 | 4.2 | | A | 0.9 | 1.3 | 1.8 | 2.3 | 3.2 | Line supply connection U1/L1, V1/L2, W1/L3 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | | mm2 | 1 ... 2.5 | 1 ... 2.5 | 1 ... 2.5 | 1 ... 2.5 | 1 ... 2.5 | Motor connection U2, V2, W2 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | | mm2 | 1 ... 2.5 | 1 ... 2.5 | 1 ... 2.5 | 1 ... 2.5 | 1 ... 2.5 | Motor cable length, max. 5) | | | | | | | | m (ft) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | | m (ft) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | Degree of protection | | IP20 | IP20 | IP20 | IP20 | IP20 | Dimensions | | | | | | | | mm (in) | 73 (2.87) | 73 (2.87) | 73 (2.87) | 73 (2.87) | 73 (2.87) | | mm (in) | 196 (7.72) | 196 (7.72) | 196 (7.72) | 196 (7.72) | 196 (7.72) | | | | | | | | | mm (in) | 165 (6.50) | 165 (6.50) | 165 (6.50) | 165 (6.50) | 165 (6.50) | - With operator panel, max.
| mm (in) | 245 (9.65) | 245 (9.65) | 245 (9.65) | 245 (9.65) | 245 (9.65) | Frame size | | FSA | FSA | FSA | FSA | FSA | Weight, approx. | | | | | | | - Without integrated line filter
| kg (lb) | 1.4 (3.09) | 1.4 (3.09) | 1.4 (3.09) | 1.4 (3.09) | 1.4 (3.09) | - With integrated line filter
| kg (lb) | 1.6 (3.53) | 1.6 (3.53) | 1.6 (3.53) | 1.6 (3.53) | 1.6 (3.53) |
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO). 2) The base-load current IH is based on the duty cycle for high overload (HO). 3) Typical values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311 4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate. 5) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values acc. to EN 61800‑3 Category C2. With unshielded cables, Category C2 is not achieved. Line voltage 380 ... 480 V 3 AC | PM230 Power Modules degree of protection IP20 Standard variant |
|---|
Without integrated line filter | 6SL3210-1NE15-8UG1 | 6SL3210-1NE17-7UG1 | 6SL3210-1NE21-0UG1 | 6SL3210-1NE21-3UG1 | 6SL3210-1NE21-8UG1 |
|---|
With integrated line filter class A | 6SL3210-1NE15-8AG1 | 6SL3210-1NE17-7AG1 | 6SL3210-1NE21-0AG1 | 6SL3210-1NE21-3AG1 | 6SL3210-1NE21-8AG1 |
|---|
Output current at 50 Hz 400 V 3 AC | | | | | | | | A | 5.9 | 7.7 | 10.2 | 13.2 | 18 | | A | 5.9 | 7.7 | 10.2 | 13.2 | 18 | | A | 4.1 | 5.9 | 7.7 | 10.2 | 13.2 | | A | 8.9 | 11.8 | 15.4 | 20.4 | 27 | Rated power | | | | | | | | kW | 2.2 | 3 | 4 | 5.5 | 7.5 | | kW | 1.5 | 2.2 | 3 | 4 | 5.5 | Rated pulse frequency | kHz | 4 | 4 | 4 | 4 | 4 | Efficiency η | % | 96 | 96 | 97 | 97 | 97 | Power loss 3) at rated current | kW | 0.078 | 0.102 | 0.13 | 0.165 | 0.224 | Cooling air requirement | m3/s (ft3/s) | 0.005 (0.2) | 0.005 (0.2) | 0.009 (0.3) | 0.009 (0.3) | 0.009 (0.3) | Sound pressure level LpA (1 m) | dB | <50 | <50 | <62 | <62 | <62 | 24 V DC power supply for Control Unit | A | 1 | 1 | 1 | 1 | 1 | Input current 4) | | | | | | | | A | 6.1 | 8 | 11 | 14 | 19 | | A | 4.2 | 6.1 | 8 | 11 | 14 | Line supply connection U1/L1, V1/L2, W1/L3 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | | mm2 | 1.5 ... 2.5 | 1.5 ... 2.5 | 1.5 ... 6 | 1.5 ... 6 | 1.5 ... 6 | Motor connection U2, V2, W2 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | | mm2 | 1.5 ... 2.5 | 1.5 ... 2.5 | 1.5 ... 6 | 1.5 ... 6 | 1.5 ... 6 | Motor cable length, max. 5) | | | | | | | | m (ft) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | | m (ft) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | Degree of protection | | IP20 | IP20 | IP20 | IP20 | IP20 | Dimensions | | | | | | | | mm (in) | 73 (2.87) | 73 (2.87) | 100 (3.94) | 100 (3.94) | 100 (3.94) | | mm (in) | 196 (7.72) | 196 (7.72) | 292 (11.50) | 292 (11.50) | 292 (11.50) | | | | | | | | | mm (in) | 165 (6.50) | 165 (6.50) | 165 (6.50) | 165 (6.50) | 165 (6.50) | - With operator panel, max.
| mm (in) | 245 (9.65) | 245 (9.65) | 245 (9.65) | 245 (9.65) | 245 (9.65) | Frame size | | FSA | FSA | FSB | FSB | FSB | Weight, approx. | | | | | | | - Without integrated line filter
| kg (lb) | 1.4 (3.09) | 1.4 (3.09) | 2.8 (6.17) | 2.8 (6.17) | 2.8 (6.17) | - With integrated line filter
| kg (lb) | 1.6 (3.53) | 1.6 (3.53) | 3 (6.61) | 3 (6.61) | 3 (6.61) |
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO). 2) The base-load current IH is based on the duty cycle for high overload (HO). 3) Typical values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311 4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate. 5) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values acc. to EN 61800‑3 Category C2. With unshielded cables, Category C2 is not achieved. Line voltage 380 ... 480 V 3 AC | PM230 Power Modules degree of protection IP20 Standard variant |
|---|
Without integrated line filter | 6SL3210-
1NE22-6UG1 | 6SL3210-
1NE23-2UG1 | 6SL3210-
1NE23-8UG1 | 6SL3210-
1NE24-5UL0 | 6SL3210-
1NE26-0UL0 |
|---|
With integrated line filter class A | 6SL3210-
1NE22-6AG1 | 6SL3210-
1NE23-2AG1 | 6SL3210-
1NE23-8AG1 | 6SL3210-
1NE24-5AL0 | 6SL3210-
1NE26-0AL0 |
|---|
Output current at 50 Hz 400 V 3 AC | | | | | | | | A | 26 | 32 | 38 | 45 | 60 | | A | 26 | 32 | 38 | 45 | 60 | | A | 18 | 26 | 32 | 38 | 45 | | A | 39 | 52 | 64 | 57 | 67 | Rated power | | | | | | | | kW | 11 | 15 | 18.5 | 22 | 30 | | kW | 7.5 | 11 | 15 | 18.5 | 22 | Rated pulse frequency | kHz | 4 | 4 | 4 | 4 | 4 | Efficiency η | % | 97 | 97 | 98 | 98 | 97 | Power loss 3) at rated current | kW | 0.291 | 0.355 | 0.423 | 0.539 | 0.726 | Cooling air requirement | m3/s (ft3/s) | 0.019 (0.7) | 0.019 (0.7) | 0.019 (0.7) | 0.08 (2.8) | 0.08 (2.8) | Sound pressure level LpA (1 m) | dB | <65 | <65 | <65 | <60 | <60 | 24 V DC power supply for Control Unit | A | 1 | 1 | 1 | 1 | 1 | Input current 4) | | | | | | | | A | 27 | 33 | 39 | 42 | 56 | | A | 19 | 27 | 33 | 36 | 42 | Line supply connection U1/L1, V1/L2, W1/L3 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | M6 screw studs | M6 screw studs | | mm2 | 6 ... 16 | 6 ... 16 | 6 ... 16 | 16 ... 35 | 16 ... 35 | Motor connection U2, V2, W2 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | M6 screw studs | M6 screw studs | | mm2 | 6 ... 16 | 6 ... 16 | 6 ... 16 | 16 ... 35 | 16 ... 35 | Motor cable length, max. 5) | | | | | | | | m (ft) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | | m (ft) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | Degree of protection | | IP20 | IP20 | IP20 | IP20 | IP20 | Dimensions | | | | | | | | mm (in) | 140 (5.51) | 140 (5.51) | 140 (5.51) | 275 (10.83) | 275 (10.83) | | | | | | | | - Without integrated line filter
| mm (in) | 355 (13.98) | 355 (13.98) | 355 (13.98) | 419 (16.50) | 419 (16.50) | - With integrated line filter
| mm (in) | 355 (13.98) | 355 (13.98) | 355 (13.98) | 512 (20.16) | 512 (20.16) | | | | | | | | | mm (in) | 165 (6.50) | 165 (6.50) | 165 (6.50) | 204 (8.03) | 204 (8.03) | - With operator panel, max.
| mm (in) | 245 (9.65) | 245 (9.65) | 245 (9.65) | 275 (10.83) | 275 (10.83) | Frame size | | FSC | FSC | FSC | FSD | FSD | Weight, approx. | | | | | | | - Without integrated line filter
| kg (lb) | 4.5 (9.92) | 4.5 (9.92) | 4.5 (9.92) | 11 (24.3) | 11 (24.3) | - With integrated line filter
| kg (lb) | 5.1 (11.25) | 5.1 (11.25) | 5.1 (11.25) | 14 (30.87) | 14 (30.87) |
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO). 2) The base-load current IH is based on the duty cycle for high overload (HO). 3) Typical values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311 4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate. 5) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values acc. to EN 61800‑3 Category C2. With unshielded cables, Category C2 is not achieved. Line voltage 380 ... 480 V 3 AC | PM230 Power Modules degree of protection IP20 Standard variant |
|---|
Without integrated line filter | 6SL3210-1NE27-5UL0 | 6SL3210-1NE28-8UL0 | 6SL3210-1NE31-1UL0 | 6SL3210-1NE31-5UL0 |
|---|
With integrated line filter class A | 6SL3210-1NE27-5AL0 | 6SL3210-1NE28-8AL0 | 6SL3210-1NE31-1AL0 | 6SL3210-1NE31-5AL0 |
|---|
Output current at 50 Hz 400 V 3 AC | | | | | | | A | 75 | 90 | 110 | 145 | | A | 75 | 90 | 110 | 145 | | A | 60 | 75 | 90 | 110 | | A | 90 | 112 | 135 | 165 | Rated power | | | | | | | kW | 37 | 45 | 55 | 75 | | kW | 30 | 37 | 45 | 55 | Rated pulse frequency | kHz | 4 | 4 | 4 | 4 | Efficiency η | % | 97 | 97 | 97 | 97 | Power loss 3) at rated current | kW | 0.791 | 0.976 | 1.237 | 1.69 | Cooling air requirement | m3/s (ft3/s) | 0.08 (2.8) | 0.08 (2.8) | 0.15 (5.3) | 0.15 (5.3) | Sound pressure level LpA (1 m) | dB | <60 | <60 | <60 | <60 | 24 V DC power supply for Control Unit | A | 1 | 1 | 1 | 1 | Input current 4) | | | | | | | A | 70 | 84 | 102 | 135 | | A | 56 | 70 | 84 | 102 | Line supply connection U1/L1, V1/L2, W1/L3 | | M6 screw studs | M6 screw studs | M8 screw studs | M8 screw studs | | mm2 | 25 ... 50 | 25 ... 50 | 35 ... 120 | 35 ... 120 | Motor connection U2, V2, W2 | | M6 screw studs | M6 screw studs | M8 screw studs | M8 screw studs | | mm2 | 25 ... 50 | 25 ... 50 | 35 ... 120 | 35 ... 120 | Motor cable length, max. 5) | | | | | | | m (ft) | 25 (82) | 25 (82) | 25 (82) | 25 (82) | | m (ft) | 100 (328) | 100 (328) | 100 (328) | 100 (328) | Degree of protection | | IP20 | IP20 | IP20 | IP20 | Dimensions | | | | | | | mm (in) | 275 (10.83) | 275 (10.83) | 350 (13.78) | 350 (13.78) | | | | | | | - Without integrated line filter
| mm (in) | 499 (19.65) | 499 (19.65) | 634 (24.96) | 634 (24.96) | - With integrated line filter
| mm (in) | 635 (25) | 635 (25) | 934 (36.77) | 934 (36.77) | | | | | | | | mm (in) | 204 (8.03) | 204 (8.03) | 316 (12.44) | 316 (12.44) | - With operator panel, max.
| mm (in) | 275 (10.83) | 275 (10.83) | 387 (15.24) | 387 (15.24) | Frame size | | FSE | FSE | FSF | FSF | Weight, approx. | | | | | | - Without integrated line filter
| kg (lb) | 15 (33.1) | 15 (33.1) | 34 (74.97) | 34 (74.97) | - With integrated line filter
| kg (lb) | 22 (48.5) | 22 (48.5) | 46 (101.43) | 46 (101.43) |
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO). 2) The base-load current IH is based on the duty cycle for high overload (HO). 3) Typical values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311 4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate. 5) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values acc. to EN 61800‑3 Category C2. With unshielded cables, Category C2 is not achieved. PM230 Power Modules degree of protection IP20 Push Through variantLine voltage 380 ... 480 V 3 AC | PM230 Power Modules degree of protection IP20 Push Through variant |
|---|
Without integrated line filter | 6SL3211-1NE17-7UG1 | 6SL3211-1NE21-8UG1 | 6SL3211-1NE23-8UG1 |
|---|
With integrated line filter class A | 6SL3211-1NE17-7AG1 | 6SL3211-1NE21-8AG1 | 6SL3211-1NE23-8AG1 |
|---|
Output current at 50 Hz 400 V 3 AC | | | | | | A | 7.7 | 18 | 38 | | A | 7.7 | 18 | 38 | | A | 5.9 | 13.2 | 32 | | A | 11.8 | 27 | 64 | Rated power | | | | | | kW | 3 | 7.5 | 18.5 | | kW | 2.2 | 5.5 | 15 | Rated pulse frequency | kHz | 4 | 4 | 4 | Efficiency η | % | 96 | 97 | 98 | Power loss 3) at rated current | kW | 0.102 | 0.224 | 0.423 | Cooling air requirement | m3/s (ft3/s) | 0.005 (0.2) | 0.009 (0.3) | 0.019 (0.7) | Sound pressure level LpA (1 m) | dB | <56 | <62 | <65 | 24 V DC power supply for Control Unit | A | 1 | 1 | 1 | Input current 4) | | | | | | A | 8 | 19 | 39 | | A | 6.1 | 14 | 33 | Line supply connection U1/L1, V1/L2, W1/L3 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | | mm2 | 1.5 ... 2.5 | 4 ... 6 | 6 ... 16 | Motor connection U2, V2, W2 | | Screw-type terminals, plug-in | Screw-type terminals, plug-in | Screw-type terminals, plug-in | | mm2 | 1 ... 2.5 | 4 ... 6 | 10 ... 16 | Motor cable length, max. 5) | | | | | | m (ft) | 25 (82) | 25 (82) | 25 (82) | | m (ft) | 100 (328) | 100 (328) | 100 (328) | Degree of protection | | IP20 | IP20 | IP20 | Dimensions | | | | | | mm (in) | 126 (4.96) | 154 (6.06) | 200 (7.87) | | mm (in) | 238 (9.37) | 345 (13.58) | 411 (16.18) | | | | | | | mm (in) | 171 (6.73) | 171 (6.73) | 171 (6.73) | - With operator panel, max.
| mm (in) | 251 (9.88) | 251 (9.88) | 251 (9.88) | Frame size | | FSA | FSB | FSC | Weight, approx. With integrated line filter | | | | | - Without integrated line filter
| kg (lb) | 1.7 (3.75) | 3.4 (7.50) | 5.4 (11.91) | - With integrated line filter
| kg (lb) | 1.9 (4.19) | 3.6 (7.94) | 6 (13.23) |
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO). 2) The base-load current IH is based on the duty cycle for high overload (HO). 3) Typical values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311 4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate. 5) Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values acc. to EN 61800‑3 Category C2. With unshielded cables, Category C2 is not achieved.
|
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Àðìàòóðà DENDOR
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Äàò÷èêè è èçìåðèòåëè
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ðåãóëÿòîðû è ðåãèñòðàòîðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ïíåâìàòè÷åñêîå îáîðóäîâàíèå
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Êðàíû è Êëàïàíû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Èçìåðèòåëüíûå ïðèáîðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ñèñòåìû áåñïðîâîäíîãî óïðàâëåíèÿ «óìíûé äîì»
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Áåñêîíòàêòíûå âûêëþ÷àòåëè Êîíå÷íûå âûêëþ÷àòåëè Îïòè÷åñêèå äàò÷èêè Ýíêîäåðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Óñòàíîâêà óìÿã÷åíèÿ
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Óñòàíîâêà îáåçæåëåçèâàíèÿ
|
