PM230 Power Modules . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на PM230 Power Modules

| | | | | |

PM230 Power Modules

General technical specifications

	PM230 Power Modules
Degree of protection	IP55/UL Type 12 (with BOP-2 or blanking cover) IP54/UL Type 12 with IOP	IP20/UL Open Type (Standard or Push Through variants)
Power (low overload LO)	0.37 ... 90 kW	0.37 ... 75 kW
Rated output current (low overload LO)	1.3 ... 178 A	1.3 ... 145 A
Power (high overload HO)	0.25 ... 75 kW	0.25 ... 55 kW
Rated output current (high overload HO)	0.9 ... 145 A	0.9 ... 110 A
System operating voltage	380 ... 480 V ±10 % 3 AC
Grid requirement Short-circuit power R_SC	>100
Input frequency	47 ... 63 Hz
Output frequency
Control mode V/f	0 ... 550 Hz
Control type Vector	0 ... 240 Hz
Pulse frequency	4 kHz for higher pulse frequencies up to 16 kHz, see derating data
Power factor ?	0.9
Output voltage, max. as % of input voltage	95%
Overload capability
Low overload (LO)	Note: When the overload capability is used, the base-load current I_L is not reduced.
Frame sizes FSA to FSC	1.5 ? base-load current I_L (i. e. 150 % overload) for 3 s plus 1.1 ? base-load current I_L (i. e. 110 % overload) for 57 s within a cycle time of 300 s
Frame sizes FSD to FSF	1.1 ? base-load current I_L (i. e. 110 % overload) for 60 s within a cycle time of 300 s
High overload (HO)	Note: When the overload capability is used, the base-load current I_H is not reduced.
Frame sizes FSA to FSC	2 ? base-load current I_H (i. e. 200 % overload) for 3 s plus 1.5 ? base-load current I_H (i. e. 150 % overload) for 57 s within a cycle time of 300 s
Frame sizes FSD to FSF	1.5 ? base-load current I_H (i. e. 150 % overload) for 60 s within a cycle time of 300 s
Electromagnetic compatibility	Devices with line filter class A for applications according to Categories C3 and C2 Devices with line filter class B for applications according to Category C2 and compliance with conducted interference requirements of Category C1	Devices without line filter Devices with line filter class A for applications according to Categories C3 and C2 Devices with line filter class B for applications according to Category C2 and compliance with conducted interference requirements of Category C1
Possible braking methods	DC braking
Operating temperature
Low overload (LO)	Frame sizes FSA to FSC: -10 ... +40 °C (14 ... 104 °F) without derating Frame sizes FSD to FSF: 0 ... 40 °C (32 ... 104 °F) without derating >40 ... 60 °C (104 ... 140 °F) see derating characteristics
High overload (HO)	Frame sizes FSA to FSC: -10 ... +50 °C (14 ... 122 °F) without derating Frame sizes FSD to FSF: 0 ... 50 °C (32 ... 122 °F) without derating >50 ... 60 ? (122 ... 140 °F) see derating characteristics
Storage temperature	-40 ... +70 °C (-40 ... +158 °F)
Relative humidity	<95 %, condensation not permissible
Cooling	Power units with increased air cooling using integrated fans
Installation altitude	Up to 1000 m (3281 ft) above sea level without derating, > 1000 m (3281 ft) see derating characteristics
Protection functions	Undervoltage Overvoltage Overcurrent/overload Overtemperature Ground fault Short-circuit Stall protection Motor blocking protection Motor overtemperature Inverter overtemperature Parameter locking
Compliance with standards	UL ¹⁾, cUL ²⁾, CE, RCM, SEMI F47
Rated short-circuit current SCCR (Short Circuit Current Rating) ³⁾	Frame sizes FSA to FSC: 40 kA Frame sizes FSD to FSF: 65 kA	65 kA
CE marking	According to Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU

¹⁾ For degree of protection IP55/UL Type 12, the UL approval only applies to frame sizes FSA to FSC.

²⁾ Applies to PM230 Power Modules, frame sizes FSA to FSC.

³⁾ Applies to industrial control panel installations acc. to NEC Article 409 or UL 508A/508C.

PM230 Power Modules degree of protection IP55/UL Type 12

Line voltage 380 ... 480 V 3 AC		PM230 Power Modules, degree of protection IP55/UL Type 12
With integrated line filter class A		6SL3223-0DE13-7AA1	6SL3223-0DE15-5AA1	6SL3223-0DE17-5AA1	6SL3223-0DE21-1AA1	6SL3223-0DE21-5AA1
With integrated line filter class B		6SL3223-0DE13-7BA1	6SL3223-0DE15-5BA1	6SL3223-0DE17-5BA1	6SL3223-0DE21-1BA1	6SL3223-0DE21-5BA1
Output current at 50 Hz 400 V 3 AC
Rated current I_rated¹⁾	A	1.3	1.7	2.2	3.1	4.1
Base-load current I_L¹⁾	A	1.3	1.7	2.2	3.1	4.1
Base-load current I_H²⁾	A	0.9	1.3	1.7	2.2	3.1
Maximum current I_max	A	2	2.6	3.4	4.7	6.2
Rated power
Based on I_L	kW (hp)	0.37 (0.5)	0.55 (0.75)	0.75 (1)	1.1 (1.5)	1.5 (2)
Based on I_H	kW (hp)	0.25 (0.34)	0.37 (0.5)	0.55 (0.75)	0.75 (1)	1.1 (1.5)
Rated pulse frequency	kHz	4	4	4	4	4
Efficiency ?		0.86	0.9	0.92	0.94	0.95
Power loss ³⁾ at rated current	kW	0.04	0.043	0.047	0.055	0.064
Cooling air requirement	m³/s (ft³/s)	0.007 (0.2)	0.007 (0.2)	0.007 (0.2)	0.007 (0.2)	0.007 (0.2)
Sound pressure level L_pA (1 m/3.28 ft)	dB	61.9	61.9	61.9	61.9	61.9
24 V DC power supply for Control Unit	A	1	1	1	1	1
Input current ⁴⁾
Rated current	A	1.3	1.8	2.3	3.2	4.2
Based on I_H	A	0.9	1.3	1.8	2.3	3.2
Line supply connection U1/L1, V1/L2, W1/L3		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in
Conductor cross-section	mm²	1 ... 2.5	1 ... 2.5	1 ... 2.5	1 ... 2.5	1 ... 2.5
Motor connection U2, V2, W2		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in
Conductor cross-section	mm²	1 ... 2.5	1 ... 2.5	1 ... 2.5	1 ... 2.5	1 ... 2.5
Motor cable length, max. ⁵⁾
Shielded	m (ft)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)
Unshielded	m (ft)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)
Degree of protection ⁶⁾		IP55/UL Type 12	IP55/UL Type 12	IP55/UL Type 12	IP55/UL Type 12	IP55/UL Type 12
Dimensions
Width	mm (in)	154 (6.06)	154 (6.06)	154 (6.06)	154 (6.06)	154 (6.06)
Height	mm (in)	460 (18.11)	460 (18.11)	460 (18.1)	460 (18.11)	460 (18.1)
Depth
Without operator panel	mm (in)	249 (9.80)	249 (9.80)	249 (9.80)	249 (9.80)	249 (9.80)
With operator panel, max.	mm (in)	266 (10.47)	266 (10.47)	266 (10.47)	266 (10.47)	266 (10.47)
Frame size		FSA	FSA	FSA	FSA	FSA
Weight, approx.	kg (lb)	4.3 (9.48)	4.3 (9.48)	4.3 (9.48)	4.3 (9.48)	4.3 (9.48)

¹⁾ The rated output current I_rated and the base-load current I_L are based on the duty cycle for low overload (LO).

²⁾ The base-load current I_H is based on the duty cycle for high overload (HO).

³⁾ Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

⁴⁾ The input current depends on the motor load and line impedance and applies for a line impedance corresponding to u_K = 1%. The rated input currents apply for a load at rated power (based on I_rated) – these current values are specified on the rating plate.

⁵⁾ Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values of EN 61800?3 Category C2 (filter A) or C1 table 14 (filter B). With unshielded cables, Categories C2 and C1 are not achieved.

⁶⁾ It is essential to plug on an operator panel or the blanking cover in order to achieve degree of protection IP54/IP55/UL Type 12. For further information, see Operator panels and blanking cover for PM230 Power Modules in section Supplementary system components.

Line voltage 380 ... 480 V 3 AC		PM230 Power Modules, degree of protection IP55/UL Type 12
With integrated line filter class A		6SL3223-0DE22-2AA1	6SL3223-0DE23-0AA1	6SL3223-0DE24-0AA1	6SL3223-0DE25-5AA1	6SL3223-0DE27-5AA1
With integrated line filter class B		6SL3223-0DE22-2BA1	6SL3223-0DE23-0BA1	6SL3223-0DE24-0BA1	6SL3223-0DE25-5BA1	6SL3223-0DE27-5BA1
Output current at 50 Hz 400 V 3 AC
Rated current I_rated¹⁾	A	5.9	7.7	10.2	13.2	18
Base-load current I_L¹⁾	A	5.9	7.7	10.2	13.2	18
Base-load current I_H²⁾	A	4.1	5.9	7.7	10.2	13.2
Maximum current I_max	A	8.9	11.8	15.4	20.4	27
Rated power
Based on I_L	kW (hp)	2.2 (3)	3 (4.02)	4 (5)	5.5 (7.38)	7.5 (16.5)
Based on I_H	kW (hp)	1.5 (2)	2.2 (3)	3 (4.02)	4 (5)	5.5 (7.38)
Rated pulse frequency	kHz	4	4	4	4	4
Efficiency ?		0.96	0.96	0.97	0.97	0.97
Power loss ³⁾ at rated current	kW	0.086	0.11	0.137	0.173	0.235
Cooling air requirement	m³/s (ft³/s)	0.007 (0.2)	0.007 (0.2)	0.009 (0.3)	0.009 (0.3)	0.009 (0.3)
Sound pressure level L_pA (1 m/3.28 ft)	dB	61.9	61.9	62.8	62.8	62.8
24 V DC power supply for Control Unit	A	1	1	1	1	1
Input current ⁴⁾
Rated current	A	6.1	8	11	14	19
Based on I_H	A	4.2	6.1	8	11	14
Line supply connection U1/L1, V1/L2, W1/L3		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in
Conductor cross-section	mm²	1 ... 2.5	1 ... 2.5	2.5 ... 6	4 ... 6	4 ... 6
Motor connection U2, V2, W2		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in
Conductor cross-section	mm²	1 ... 2.5	1 ... 2.5	2.5 ... 6	4 ... 6	4 ... 6
Motor cable length, max. ⁵⁾
Shielded	m (ft)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)
Unshielded	m (ft)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)
Degree of protection ⁶⁾		IP55/UL Type 12	IP55/UL Type 12	IP55/UL Type 12	IP55/UL Type 12	IP55/UL Type 12
Dimensions
Width	mm (in)	154 (6.06)	154 (6.06)	180 (7.09)	180 (7.09)	180 (7.09)
Height	mm (in)	460 (18.11)	460 (18.11)	540 (21.26)	540 (21.26)	540 (21.26)
Depth
Without operator panel	mm (in)	249 (9.80)	249 (9.80)	249 (9.80)	249 (9.80)	249 (9.80)
With operator panel, max.	mm (in)	266 (10.47)	266 (10.47)	266 (10.47)	266 (10.47)	266 (10.47)
Frame size		FSA	FSA	FSB	FSB	FSB
Weight, approx.	kg (lb)	4.3 (9.48)	4.3 (9.48)	6.3 (14)	6.3 (14)	6.3 (14)

¹⁾ The rated output current I_rated and the base-load current I_L are based on the duty cycle for low overload (LO).

²⁾ The base-load current I_H is based on the duty cycle for high overload (HO).

³⁾ Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

Line voltage 380 ... 480 V 3 AC		PM230 Power Modules, degree of protection IP55/UL Type 12
With integrated line filter class A		6SL3223-0DE31-1AA1	6SL3223-0DE31-5AA1	6SL3223-0DE31-8AA1	–	6SL3223-0DE32-2AA0	6SL3223-0DE33-0AA0
With integrated line filter class B		6SL3223-0DE31-1BA1	6SL3223-0DE31-5BA1	–	6SL3223-0DE31-8BA0	6SL3223-0DE32-2BA0	6SL3223-0DE33-0BA0
Output current at 50 Hz 400 V 3 AC
Rated current I_rated¹⁾	A	26	32	38	38	45	60
Base-load current I_L¹⁾	A	26	32	38	38	45	60
Base-load current I_H²⁾	A	18	26	32	32	38	45
Maximum current I_max	A	39	52	64	48	57	67
Rated power
Based on I_L	kW (hp)	11 (24.26)	15 (20.12)	18.5 (24.81)	18.5 (24.81)	22 (29.50)	30 (40.23)
Based on I_H	kW (hp)	7.5 (16.5)	11 (24.26)	15 (20.12)	15 (20.12)	18.5 (24.81)	22 (29.50)
Rated pulse frequency	kHz	4	4	4	4	4	4
Efficiency ?		0.97	0.97	0.98	0.97	0.97	0.97
Power loss ³⁾ at rated current	kW	0.299	0.365	0.435	0.478	0.569	0.784
Cooling air requirement	m³/s (ft³/s)	0.02 (0.7)	0.02 (0.7)	0.02 (0.7)	0.039 (1.4)	0.039 (1.4)	0.039 (1.4)
Sound pressure level L_pA (1 m/3.28 ft)	dB	66.1	66.1	66.1	56	56	56
24 V DC power supply for Control Unit	A	1	1	1	1	1	1
Input current ⁴⁾
Rated current	A	27	33	39	39	42	56
Based on I_H	A	19	27	33	33	36	42
Line supply connection U1/L1, V1/L2, W1/L3		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	M6 screw studs	M6 screw studs	M6 screw studs
Conductor cross-section	mm²	6 ... 16	10 ... 16	10 ... 16	16 ... 35	16 ... 35	16 ... 35
Motor connection U2, V2, W2		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	M6 screw studs	M6 screw studs	M6 screw studs
Conductor cross-section	mm²	6 ... 16	10 ... 16	10 ... 16	16 ... 35	16 ... 35	16 ... 35
Motor cable length, max. ⁵⁾
Shielded	m (ft)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)
Unshielded	m (ft)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)
Degree of protection ⁶⁾		IP55/UL Type 12	IP55/UL Type 12	IP55/UL Type 12	IP55	IP55	IP55
Dimensions
Width	mm (in)	230 (9.06)	230 (9.06)	230 (9.06)	320 (12.60)	320 (12.60)	320 (12.60)
Height	mm (in)	620 (24.41)	620 (24.41)	620 (24.41)	640 (25.20)	640 (25.20)	640 (25.20)
Depth
Without operator panel	mm (in)	249 (9.80)	249 (9.80)	249 (9.80)	329 (12.95)	329 (12.95)	329 (12.95)
With operator panel, max.	mm (in)	266 (10.47)	266 (10.47)	266 (10.47)	346 (13.62)	346 (13.62)	346 (13.62)
Frame size		FSC	FSC	FSC	FSD	FSD	FSD
Weight, approx.	kg (lb)	9.5 (20.95)	9.5 (20.95)	9.5 (20.95)	31 (68.36)	31 (68.36)	31 (68.36)

¹⁾ The rated output current I_rated and the base-load current I_L are based on the duty cycle for low overload (LO).

²⁾ The base-load current I_H is based on the duty cycle for high overload (HO).

³⁾ Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

Line voltage 380 ... 480 V 3 AC		PM230 Power Modules, degree of protection IP55/UL Type 12
With integrated line filter class A		6SL3223-0DE33-7AA0	6SL3223-0DE34-5AA0	6SL3223-0DE35-5AA0	6SL3223-0DE37-5AA0	6SL3223-0DE38-8AA0
With integrated line filter class B		6SL3223-0DE33-7BA0	6SL3223-0DE34-5BA0	6SL3223-0DE35-5BA0	6SL3223-0DE37-5BA0	6SL3223-0DE38-8BA0
Output current at 50 Hz 400 V 3 AC
Rated current I_rated¹⁾	A	75	90	110	145	178
Base-load current I_L¹⁾	A	75	90	110	145	178
Base-load current I_H²⁾	A	60	75	90	110	145
Maximum current I_max	A	90	112	135	165	217
Rated power
Based on I_L	kW (hp)	37 (49.62)	45 (60.35)	55 (73.76)	75 (100.58)	90 (120.69)
Based on I_H	kW (hp)	30 (40.23)	37 (81.59)	45 (99.23)	55 (73.76)	75 (165.38)
Rated pulse frequency	kHz	4	4	4	4	4
Efficiency ?		0.97	0.97	0.97	0.97	0.97
Power loss ³⁾ at rated current	kW	0.855	1.073	1.122	1.542	1.98
Cooling air requirement	m³/s (ft³/s)	0.039 (1.4)	0.039 (1.4)	0.117 (4.1)	0.117 (4.1)	0.117 (4.1)
Sound pressure level L_pA (1 m/3.28 ft)	dB	56	56	61	61	61
24 V DC power supply for Control Unit	A	1	1	1	1	1
Input current ⁴⁾
Rated current	A	70	84	102	135	166
Based on I_H	A	56	70	84	102	135
Line supply connection U1/L1, V1/L2, W1/L3		M6 screw studs	M6 screw studs	M8 screw studs	M8 screw studs	M8 screw studs
Conductor cross-section	mm²	25 ... 50	25 ... 50	35 ... 120	35 ... 120	35 ... 120
Motor connection U2, V2, W2		M6 screw studs	M6 screw studs	M8 screw studs	M8 screw studs	M8 screw studs
Conductor cross-section	mm²	25 ... 50	25 ... 50	35 ... 120	35 ... 120	35 ... 120
Motor cable length, max. ⁵⁾
Shielded	m (ft)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)
Unshielded	m (ft)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)
Degree of protection ⁶⁾		IP55	IP55	IP55	IP55	IP55
Dimensions
Width	mm (in)	320 (12.60)	320 (12.60)	410 (16.14)	410 (16.14)	410 (16.14)
Height	mm (in)	751 (29.57)	751 (29.57)	915 (36.02)	915 (36.02)	915 (36.02)
Depth
Without operator panel	mm (in)	329 (12.95)	329 (12.95)	416 (16.38)	416 (16.38)	416 (16.38)
With operator panel, max.	mm (in)	346 (13.62)	346 (13.62)	433 (17.05)	433 (17.05)	433 (17.05)
Frame size		FSE	FSE	FSF	FSF	FSF
Weight, approx.	kg (lb)	37 (with filter cl. A) 38 (with filter cl. B)	37 (with filter cl. A) 38 (with filter cl. B)	70	70	70

¹⁾ The rated output current I_rated and the base-load current I_L are based on the duty cycle for low overload (LO).

²⁾ The base-load current I_H is based on the duty cycle for high overload (HO).

³⁾ Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

PM230 Power Modules degree of protection IP20 standard variant

Line voltage 380 ... 480 V 3 AC		PM230 Power Modules degree of protection IP20 standard variant
Without integrated line filter		6SL3210-1NE11-3UL1	6SL3210-1NE11-7UL1	6SL3210-1NE12-2UL1	6SL3210-1NE13-1UL1	6SL3210-1NE14-1UL1
With integrated line filter class A		6SL3210-1NE11-3AL1	6SL3210-1NE11-7AL1	6SL3210-1NE12-2AL1	6SL3210-1NE13-1AL1	6SL3210-1NE14-1AL1
Output current at 50 Hz 400 V 3 AC
Rated current I_rated¹⁾	A	1.3	1.7	2.2	3.1	4.1
Base-load current I_L¹⁾	A	1.3	1.7	2.2	3.1	4.1
Base-load current I_H²⁾	A	0.9	1.3	1.7	2.2	3.1
Maximum current I_max	A	2	2.6	3.4	4.7	6.2
Rated power
Based on I_L	kW (hp)	0.37 (0.5)	0.55 (0.75)	0.75 (1)	1.1 (1.5)	1.5 (2)
Based on I_H	kW (hp)	0.25 (0.34)	0.37 (0.5)	0.55 (0.75)	0.75 (1)	1.1 (1.5)
Rated pulse frequency	kHz	4	4	4	4	4
Efficiency ?		0.89	0.93	0.93	0.94	0.95
Power loss ³⁾ at rated current	kW	0.031	0.034	0.041	0.049	0.06
Cooling air requirement	m³/s (ft³/s)	0.002 (0.1)	0.002 (0.1)	0.005 (0.2)	0.005 (0.2)	0.005 (0.2)
Sound pressure level L_pA (1 m/3.28 ft)	dB	<50	<50	<50	<50	<50
24 V DC power supply for Control Unit	A	1	1	1	1	1
Input current ⁴⁾
Rated current	A	1.3	1.8	2.3	3.2	4.2
Based on I_H	A	0.9	1.3	1.8	2.3	3.2
Line supply connection U1/L1, V1/L2, W1/L3		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in
Conductor cross-section	mm²	1 ... 2.5	1 ... 2.5	1 ... 2.5	1 ... 2.5	1 ... 2.5
Motor connection U2, V2, W2		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in
Conductor cross-section	mm²	1 ... 2.5	1 ... 2.5	1 ... 2.5	1 ... 2.5	1 ... 2.5
Motor cable length, max. ⁵⁾
Shielded	m (ft)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)
Unshielded	m (ft)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)
Degree of protection		IP20	IP20	IP20	IP20	IP20
Dimensions
Width	mm (in)	73 (2.87)	73 (2.87)	73 (2.87)	73 (2.87)	73 (2.87)
Height	mm (in)	196 (7.72)	196 (7.72)	196 (7.72)	196 (7.72)	196 (7.72)
Depth
Without operator panel	mm (in)	165 (6.50)	165 (6.50)	165 (6.50)	165 (6.50)	165 (6.50)
With operator panel, max.	mm (in)	245 (9.65)	245 (9.65)	245 (9.65)	245 (9.65)	245 (9.65)
Frame size		FSA	FSA	FSA	FSA	FSA
Weight, approx.
Without integrated line filter	kg (lb)	1.4 (3.09)	1.4 (3.09)	1.4 (3.09)	1.4 (3.09)	1.4 (3.09)
With integrated line filter	kg (lb)	1.6 (3.53)	1.6 (3.53)	1.6 (3.53)	1.6 (3.53)	1.6 (3.53)

¹⁾ The rated output current I_rated and the base-load current I_L are based on the duty cycle for low overload (LO).

²⁾ The base-load current I_H is based on the duty cycle for high overload (HO).

³⁾ Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

⁵⁾ Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values acc. to EN 61800?3 Category C2. With unshielded cables, Category C2 is not achieved.

Line voltage 380 ... 480 V 3 AC		PM230 Power Modules degree of protection IP20 standard variant
Without integrated line filter		6SL3210-1NE15-8UL1	6SL3210-1NE17-7UL1	6SL3210-1NE21-0UL1	6SL3210-1NE21-3UL1	6SL3210-1NE21-8UL1
With integrated line filter class A		6SL3210-1NE15-8AL1	6SL3210-1NE17-7AL1	6SL3210-1NE21-0AL1	6SL3210-1NE21-3AL1	6SL3210-1NE21-8AL1
Output current at 50 Hz 400 V 3 AC
Rated current I_rated¹⁾	A	5.9	7.7	10.2	13.2	18
Base-load current I_L¹⁾	A	5.9	7.7	10.2	13.2	18
Base-load current I_H²⁾	A	4.1	5.9	7.7	10.2	13.2
Maximum current I_max	A	8.9	11.8	15.4	20.4	27
Rated power
Based on I_L	kW (hp)	2.2 (3)	3 (4.02)	4 (5)	5.5 (7.38)	7.5 (16.5)
Based on I_H	kW (hp)	1.5 (2)	2.2 (3)	3 (4.02)	4 (5)	5.5 (7.38)
Rated pulse frequency	kHz	4	4	4	4	4
Efficiency ?		0.96	0.96	0.97	0.97	0.97
Power loss ³⁾ at rated current	kW	0.078	0.102	0.13	0.165	0.224
Cooling air requirement	m³/s (ft³/s)	0.005 (0.2)	0.005 (0.2)	0.009 (0.3)	0.009 (0.3)	0.009 (0.3)
Sound pressure level L_pA (1 m/3.28 ft)	dB	<50	<50	<62	<62	<62
24 V DC power supply for Control Unit	A	1	1	1	1	1
Input current ⁴⁾
Rated current	A	6.1	8	11	14	19
Based on I_H	A	4.2	6.1	8	11	14
Line supply connection U1/L1, V1/L2, W1/L3		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in
Conductor cross-section	mm²	1.5 ... 2.5	1.5 ... 2.5	1.5 ... 6	1.5 ... 6	1.5 ... 6
Motor connection U2, V2, W2		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in
Conductor cross-section	mm²	1.5 ... 2.5	1.5 ... 2.5	1.5 ... 6	1.5 ... 6	1.5 ... 6
Motor cable length, max. ⁵⁾
Shielded	m (ft)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)
Unshielded	m (ft)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)
Degree of protection		IP20	IP20	IP20	IP20	IP20
Dimensions
Width	mm (in)	73 (2.87)	73 (2.87)	100 (328.10)	100 (328.10)	100 (328.10)
Height	mm (in)	196 (7.72)	196 (7.72)	292 (11.50)	292 (11.50)	292 (11.50)
Depth
Without operator panel	mm (in)	165 (6.50)	165 (6.50)	165 (6.50)	165 (6.50)	165 (6.50)
With operator panel, max.	mm (in)	245 (9.65)	245 (9.65)	245 (9.65)	245 (9.65)	245 (9.65)
Frame size		FSA	FSA	FSB	FSB	FSB
Weight, approx.
Without integrated line filter	kg (lb)	1.4 (3.09)	1.4 (3.09)	2.8 (6.17)	2.8 (6.17)	2.8 (6.17)
With integrated line filter	kg (lb)	1.6 (3.53)	1.6 (3.53)	3 (4.02)	3 (4.02)	3 (4.02)

¹⁾ The rated output current I_rated and the base-load current I_L are based on the duty cycle for low overload (LO).

²⁾ The base-load current I_H is based on the duty cycle for high overload (HO).

³⁾ Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

Line voltage 380 ... 480 V 3 AC		PM230 Power Modules degree of protection IP20 standard variant
Without integrated line filter		6SL3210- 1NE22-6UL1	6SL3210- 1NE23-2UL1	6SL3210- 1NE23-8UL1	6SL3210- 1NE24-5UL0	6SL3210- 1NE26-0UL0
With integrated line filter class A		6SL3210- 1NE22-6AL1	6SL3210- 1NE23-2AL1	6SL3210- 1NE23-8AL1	6SL3210- 1NE24-5AL0	6SL3210- 1NE26-0AL0
Output current at 50 Hz 400 V 3 AC
Rated current I_rated¹⁾	A	26	32	38	45	60
Base-load current I_L¹⁾	A	26	32	38	45	60
Base-load current I_H²⁾	A	18	26	32	38	45
Maximum current I_max	A	39	52	64	57	67
Rated power
Based on I_L	kW (hp)	11 (14.8)	15 (20.1)	18.5 (24.8)	22 (29.5)	30 (40.2)
Based on I_H	kW (hp)	7.5 (10.1)	11 (14.8)	15 (20.1)	18.5 (24.8)	22 (29.5)
Rated pulse frequency	kHz	4	4	4	4	4
Efficiency ?		0.97	0.97	0.98	0.98	0.97
Power loss ³⁾ at rated current	kW	0.291	0.355	0.423	0.539	0.726
Cooling air requirement	m³/s (ft³/s)	0.019 (0.7)	0.019 (0.7)	0.019 (0.7)	0.08 (2.8)	0.08 (2.8)
Sound pressure level L_pA (1 m/3.28 ft)	dB	<65	<65	<65	<60	<60
24 V DC power supply for Control Unit	A	1	1	1	1	1
Input current ⁴⁾
Rated current	A	27	33	39	42	56
Based on I_H	A	19	27	33	36	42
Line supply connection U1/L1, V1/L2, W1/L3		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	M6 screw studs	M6 screw studs
Conductor cross-section	mm²	6 ... 16	6 ... 16	6 ... 16	16 ... 35	16 ... 35
Motor connection U2, V2, W2		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in	M6 screw studs	M6 screw studs
Conductor cross-section	mm²	6 ... 16	6 ... 16	6 ... 16	16 ... 35	16 ... 35
Motor cable length, max. ⁵⁾
Shielded	m (ft)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)
Unshielded	m (ft)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)
Degree of protection		IP20	IP20	IP20	IP20	IP20
Dimensions
Width	mm (in)	140 (5.51)	140 (5.51)	140 (5.51)	275 (10.83)	275 (10.83)
Height
Without integrated line filter	mm (in)	355 (13.98)	355 (13.98)	355 (13.98)	419 (16.50)	419 (16.50)
With integrated line filter	mm (in)	355 (13.98)	355 (13.98)	355 (13.98)	512 (20.16)	512 (20.16)
Depth
Without operator panel	mm (in)	165 (6.50)	165 (6.50)	165 (6.50)	204 (8.03)	204 (8.03)
With operator panel, max.	mm (in)	245 (9.65)	245 (9.65)	245 (9.65)	275 (10.83)	275 (10.83)
Frame size		FSC	FSC	FSC	FSD	FSD
Weight, approx.
Without integrated line filter	kg (lb)	4.5 (9.92)	4.5 (9.92)	4.5 (9.92)	11 (24.26)	11 (24.26)
With integrated line filter	kg (lb)	5.1 (11.25)	5.1 (11.25)	5.1 (11.25)	14 (30.87)	14 (30.87)

¹⁾ The rated output current I_rated and the base-load current I_L are based on the duty cycle for low overload (LO).

²⁾ The base-load current I_H is based on the duty cycle for high overload (HO).

³⁾ Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

Line voltage 380 ... 480 V 3 AC		PM230 Power Modules degree of protection IP20 standard variant
Without integrated line filter		6SL3210-1NE27-5UL0	6SL3210-1NE28-8UL0	6SL3210-1NE31-1UL0	6SL3210-1NE31-5UL0
With integrated line filter class A		6SL3210-1NE27-5AL0	6SL3210-1NE28-8AL0	6SL3210-1NE31-1AL0	6SL3210-1NE31-5AL0
Output current at 50 Hz 400 V 3 AC
Rated current I_rated¹⁾	A	75	90	110	145
Base-load current I_L¹⁾	A	75	90	110	145
Base-load current I_H²⁾	A	60	75	90	110
Maximum current I_max	A	90	112	135	165
Rated power
Based on I_L	kW (hp)	37 (49.6)	45 (60.3)	55 (73.8)	75 (101)
Based on I_H	kW (hp)	30 (40.23)	37 (49.62)	45 (60.35)	55 (73.8)
Rated pulse frequency	kHz	4	4	4	4
Efficiency ?		0.97	0.97	0.97	0.97
Power loss ³⁾ at rated current	kW	0.791	0.976	1.237	1.69
Cooling air requirement	m³/s (ft³/s)	0.08 (2.8)	0.08 (2.8)	0.15 (5.3)	0.15 (5.3)
Sound pressure level L_pA (1 m/3.28 ft)	dB	<60	<60	<60	<60
24 V DC power supply for Control Unit	A	1	1	1	1
Input current ⁴⁾
Rated current	A	70	84	102	135
Based on I_H	A	56	70	84	102
Line supply connection U1/L1, V1/L2, W1/L3		M6 screw studs	M6 screw studs	M8 screw studs	M8 screw studs
Conductor cross-section	mm²	25 ... 50	25 ... 50	35 ... 120	35 ... 120
Motor connection U2, V2, W2		M6 screw studs	M6 screw studs	M8 screw studs	M8 screw studs
Conductor cross-section	mm²	25 ... 50	25 ... 50	35 ... 120	35 ... 120
Motor cable length, max. ⁵⁾
Shielded	m (ft)	25 (82.03)	25 (82.03)	25 (82.03)	25 (82.03)
Unshielded	m (ft)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)
Degree of protection		IP20	IP20	IP20	IP20
Dimensions
Width	mm (in)	275 (10.83)	275 (10.83)	350 (13.78)	350 (13.78)
Height
Without integrated line filter	mm (in)	499 (19.65)	499 (19.65)	634 (24.96)	634 (24.96)
With integrated line filter	mm (in)	635 (25)	635 (25)	934 (36.77)	934 (36.77)
Depth
Without operator panel	mm (in)	204 (8.03)	204 (8.03)	316 (12.44)	316 (12.44)
With operator panel, max.	mm (in)	275 (10.83)	275 (10.83)	387 (15.24)	387 (15.24)
Frame size		FSE	FSE	FSF	FSF
Weight, approx.
Without integrated line filter	kg (lb)	15 (20.12)	15 (20.12)	34 (74.97)	34 (74.97)
With integrated line filter	kg (lb)	22 (29.50)	22 (29.50)	46 (101.43)	46 (101.43)

¹⁾ The rated output current I_rated and the base-load current I_L are based on the duty cycle for low overload (LO).

²⁾ The base-load current I_H is based on the duty cycle for high overload (HO).

³⁾ Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

PM230 Power Modules degree of protection IP20 push-through variant

Line voltage 380 ... 480 V 3 AC		PM230 Power Modules degree of protection IP20 push-through variant
Without integrated line filter		6SL3211-1NE17-7UL1	6SL3211-1NE21-8UL1	6SL3211-1NE23-8UL1
With integrated line filter class A		6SL3211-1NE17-7AL1	6SL3211-1NE21-8AL1	6SL3211-1NE23-8AL1
Output current at 50 Hz 400 V 3 AC
Rated current I_rated¹⁾	A	7.7	18	38
Base-load current I_L¹⁾	A	7.7	18	38
Base-load current I_H²⁾	A	5.9	13.2	32
Maximum current I_max	A	11.8	27	64
Rated power
Based on I_L	kW (hp)	3 (4.02)	7.5 (10.1)	18.5 (24.8)
Based on I_H	kW (hp)	2.2 (2.95)	5.5 (7.38)	15 (20.12)
Rated pulse frequency	kHz	4	4	4
Efficiency ?		0.96	0.97	0.98
Power loss ³⁾ at rated current	kW	0.102	0.224	0.423
Cooling air requirement	m³/s (ft³/s)	0.005 (0.2)	0.009 (0.3)	0.019 (0.7)
Sound pressure level L_pA (1 m/3.28 ft)	dB	<56	<62	<65
24 V DC power supply for Control Unit	A	1	1	1
Input current ⁴⁾
Rated current	A	8	19	39
Based on I_H	A	6.1	14	33
Line supply connection U1/L1, V1/L2, W1/L3		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in
Conductor cross-section	mm²	1.5 ... 2.5	4 ... 6	6 ... 16
Motor connection U2, V2, W2		Screw terminals, plug-in	Screw terminals, plug-in	Screw terminals, plug-in
Conductor cross-section	mm²	1 ... 2.5	4 ... 6	10 ... 16
Motor cable length, max. ⁵⁾
Shielded	m (ft)	25 (82.03)	25 (82.03)	25 (82.03)
Unshielded	m (ft)	100 (328.10)	100 (328.10)	100 (328.10)
Degree of protection		IP20	IP20	IP20
Dimensions
Width	mm (in)	126 (4.96)	154 (6.06)	200 (7.87)
Height	mm (in)	238 (9.37)	345 (13.58)	411 (16.18)
Depth
Without operator panel	mm (in)	171 (6.73)	171 (6.73)	171 (6.73)
With operator panel, max.	mm (in)	251 (9.88)	251 (9.88)	251 (9.88)
Frame size		FSA	FSB	FSC
Weight, approx. With integrated line filter
Without integrated line filter	kg (lb)	1.7 (3.75)	3.4 (7.50)	5.4 (11.91)
With integrated line filter	kg (lb)	1.9 (4.19)	3.6 (7.94)	6 (13.23)

¹⁾ The rated output current I_rated and the base-load current I_L are based on the duty cycle for low overload (LO).

²⁾ The base-load current I_H is based on the duty cycle for high overload (HO).

³⁾ Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания