Supplements to order numbers and special versions . Обзор. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Supplements to order numbers and special versions

| | |

Overview special versions for SIMOTICS XP 1MA/1MJ/1LA/1LG

Special versions	Additional identification code -Z with order code and plain text if required		Ex e		Ex de	Ex n/Ex tD
			Aluminum series	Cast-iron series	Cast-iron series	Aluminum series	Cast-iron series
Motor protection
With PTC thermistors for alarm for converter-fed operation in Zones 2, 21, 22	A10					вњ“	вњ“
Motor protection with PTC thermistors with 1 (for motors 1LE10 FS 80 and 90) or 3 embedded temperature sensors for tripping	A11		вњ“	вњ“	вњ“	вњ“	вњ“
Motor protection with PTC thermistors with 6 embedded temperature sensors for alarm and tripping	A12		вњ“	вњ“	вњ“	вњ“	вњ“
Motor protection with PTC thermistors for converter-fed operation with 4 embedded temperature sensors for tripping	A15				вњ“
Motor protection with PTC thermistors for converter-fed operation with 8 embedded temperature sensors for alarm and tripping	A16				вњ“
Motor temperature detection with embedded temperature sensor KTY 84-130	A23					вњ“	вњ“
Motor temperature detection with embedded temperature sensors 2 x KTY 84вЂ‘130	A25					вњ“	вњ“
Installation of 3 PT100 resistance thermometers	A60					вњ“	вњ“
Installation of 6 PT100 resistance thermometers in stator winding	A61						вњ“
Installation of 2 PT100 screw-in resistance thermometers in basic circuit for rolling-contact bearings	A72			вњ“	вњ“		вњ“
Installation of 2 PT100 screw-in resistance thermometers in 3-wire circuit for rolling-contact bearings	A78			вњ“	вњ“		вњ“
Installation of 2 PT100 double screw-in resistance thermometers in 3-wire circuit for rolling-contact bearings	A80						вњ“
Motor connection and connection box
Connection box on RHS	K09		вњ“	вњ“	вњ“	вњ“	вњ“
Connection box on LHS	K10		вњ“	вњ“	вњ“	вњ“	вњ“
Connection box on top, feet screwed on	K11						вњ“
Connection box in cast-iron version	K15			вњ“	вњ“		вњ“
Explosion-proof connection box, Ex d IIC type of protection	K53				вњ“
One metal cable gland	K54					вњ“	вњ“
One metal cable gland, certified according to ATEX	J04	New!				вњ“	вњ“
Cable gland, max. configuration, certified according to ATEX	K55					вњ“	вњ“
Rotation of the connection box through 90°, entry from DE	K83		вњ“	вњ“	вњ“	вњ“	вњ“
Rotation of the connection box through 90°, entry from NDE	K84		вњ“	вњ“	вњ“	вњ“	вњ“
Rotation of the connection box through 180°	K85		вњ“	вњ“	вњ“	вњ“	вњ“
Next larger connection box	L00			вњ“		вњ“	вњ“
External grounding	L13					вњ“	вњ“
Auxiliary connection box 1XB3020	L97			вњ“	вњ“		вњ“
Saddle terminal for connection without cable lug, accessories pack	M47				вњ“		вњ“
Windings and insulation
Increased air humidity/temperature with 30 to 60 g water per m³ of air	C19		вњ“	вњ“	вњ“	вњ“	вњ“
Temperature class 155 (F), used acc. to 130 (B), coolant temperature 45 °C, derating approx. 4 %	C22		вњ“	вњ“	вњ“	вњ“	вњ“
Temperature class 155 (F), used acc. to 130 (B), coolant temperature 50 °C, derating approx. 8 %	C23		вњ“	вњ“	вњ“	вњ“	вњ“
Temperature class 155 (F), used acc. to 130 (B), coolant temperature 55 °C, derating approx. 13 %	C24		вњ“	вњ“	вњ“	вњ“	вњ“
Temperature class 155 (F), used acc. to 130 (B), coolant temperature 60 °C, derating approx. 18 %	C25		вњ“	вњ“	вњ“	вњ“	вњ“
Increased air humidity/temperature with 60 to 100 g water per m³ of air	C26		вњ“	вњ“	вњ“	вњ“	вњ“
Temperature class 155 (F), used acc. to 130 (B), with higher coolant temperature and/or site altitude	Y50 вЂў and specified output, CT .. °C or SA вЂ¦. m above sea level				вњ“	вњ“	вњ“
Colors and paint finish
Standard finish in RAL 7030 stone gray	–			вњ“	вњ“		вњ“
Special finish in RAL 7030 stone gray	–		вњ“			вњ“
Special finish in RAL 7030 stone gray	K26			вњ“	вњ“		вњ“
Special finish in other standard RAL colors	Y54 вЂў and special finish RAL вЂ¦.		вњ“	вњ“	вњ“	вњ“	вњ“
Special finish in special RAL colors	Y51 вЂў and special finish RAL вЂ¦.		вњ“	вњ“	вњ“	вњ“	вњ“
Special finish for use offshore	M91		вњ“	вњ“	вњ“		вњ“
Special finish sea air resistant	M94			вњ“	вњ“	вњ“	вњ“
Unpainted (only cast-iron parts primed)	K23		вњ“	вњ“	вњ“	вњ“	вњ“
Unpainted, only primed	K24		вњ“	вњ“	вњ“	вњ“	вњ“
Special technology
Mounting of explosion-proof rotary pulse encoder for use in Zones 2, 21, 22	H86					вњ“	вњ“
Mounting of explosion-proof rotary pulse encoder for use on motors Ex d/de in Zone 1	H87				вњ“
Mounting of explosion-proof separately driven fan Ex nA for use in Zone 2	M95						вњ“
Mounting of explosion-proof separately driven fan II 2D for use in Zone 21	M96						вњ“
Mounting of explosion-proof separately driven fan II 3D for use in Zone 22	M97					вњ“	вњ“
Mounting of explosion-proof separately driven fan Ex de for use in Zone 1	M98				вњ“
Mechanical design and degrees of protection
Drive-end seal for flangemounting motors, oil-tight to 0.1 bar	K17		вњ“	вњ“	вњ“	вњ“	вњ“
With two additional eyebolts for IM V1/IM V3	K32					вњ“
Low-noise version for 2-pole motors with clockwise direction of rotation	K37		вњ“	вњ“	вњ“	вњ“	вњ“
Low-noise version for 2-pole motors with counterclockwise direction of rotation	K38		вњ“	вњ“	вњ“	вњ“	вњ“
IP65 degree of protection	K50		вњ“	вњ“	вњ“	вњ“	вњ“
IP56 degree of protection	K52		вњ“	вњ“	вњ“	вњ“	вњ“
Vibration-proof version	L03		вњ“	вњ“	вњ“	вњ“	вњ“
Condensation drainage holes	L12		вњ“	вњ“		вњ“	вњ“
Rust-resistant screws (externally)	M27		вњ“	вњ“		вњ“	вњ“
Mechanical protection for encoder	M68				вњ“	вњ“	вњ“
Coolant temperature
Coolant temperature -40 to +40 °C for Ex motor	D19		вњ“	вњ“		вњ“	вњ“
Designs in accordance with standards and specifications
CCC China Compulsory Certification	D01		вњ“		вњ“	вњ“
Electrical according to NEMA MG1-12	D30					вњ“	вњ“
Ex certification for China	D32				вњ“	вњ“	вњ“
China Energy Efficiency Label	D34	New!			вњ“	вњ“	вњ“
Ex certification for Russia	D35	New!	вњ“	вњ“	вњ“	вњ“	вњ“
NEMA Energy Efficient, North America version according to NEMA MG1, Table 12-11, incl. UL and CSA	D42	New!				вњ“	вњ“
VIK version	K30		вњ“	вњ“	вњ“
Design for Zones according to ATEX
Design for Zone 2 for mains-fed operation Ex nA II T3 according to IEC/EN 60079вЂ‘15	M72					вњ“	вњ“
Design for Zone 2 for converter-fed operation, with derating Ex nA II T3 according to IEC/EN 60079вЂ‘15	M73					вњ“	вњ“
Design (IP55) for Zone 2 and 22, for non-conductive dust, for mains-fed operation	M74					вњ“	вњ“
Design (IP55) for Zone 2 and 22, for non-conductive dust, for converter-fed operation, with derating	M75					вњ“	вњ“
Design (IP65) for Zone 1 and 21, as well as Zone 22 for conductive dust, for mains-fed operation	M76				вњ“
Design (IP65) for Zone 1 and 21, as well as Zone 22, for conductive dust, for converter-fed operation – with derating	M77				вњ“
Design for Zone 21, as well as Zone 22 for conductive dust (IP65) for mains-fed operation	M34					вњ“	вњ“
Design for Zone 21, as well as Zone 22 for conductive dust (IP65) for converter-fed operation, with derating	M38					вњ“	вњ“
Design for Zone 22 for non-conductive dust (IP55) for mains-fed operation	M35					вњ“	вњ“
Design for Zone 22 for non-conductive dust (IP55) for converter-fed operation, with derating	M39					вњ“	вњ“
VIK version	K30					вњ“	вњ“
Ex nA II on VIK rating plate	C27					вњ“	вњ“
T1/T2 on rating plate	C30		вњ“	вњ“
Alternative converter (SIMOVERT MASTERDRIVES, SINAMICS G110, SINAMICS G120 (for 1LA motors up to FS 225), SINAMICS S120 or ET 200S FC)	Y68 вЂў and converter type .вЂ¦					вњ“	вњ“
Bearings and lubrication
Measuring nipple for SPM shock pulse measurement for bearing inspection	G50			вњ“	вњ“	вњ“	вњ“
Bearing design for increased cantilever forces	K20		вњ“	вњ“	вњ“	вњ“	вњ“
Special bearing for DE and NDE, bearing size 63	K36						вњ“
Regreasing device	K40		вњ“	вњ“	вњ“	вњ“	вњ“
Located bearing DE	K94		вњ“	вњ“		вњ“	вњ“
Located bearing NDE	L04		вњ“	вњ“		вњ“	вњ“
Insulated bearing cartridge	L27				вњ“		вњ“
Balance and vibration quantity
Vibration quantity level A	–		вњ“	вњ“	вњ“	вњ“	вњ“
Vibration quantity level B	K02		вњ“	вњ“	вњ“	вњ“	вњ“
Full-key balancing	L68		вњ“	вњ“	вњ“	вњ“	вњ“
Balancing without key	M37		вњ“	вњ“	вњ“	вњ“	вњ“
Shaft and rotor
Concentricity of shaft extension, coaxiality and linear movement in accordance with DIN 42955 Tolerance R for flange-mounting motors	K04		вњ“	вњ“	вњ“	вњ“	вњ“
Second standard shaft extension	K16		вњ“	вњ“	вњ“	вњ“	вњ“
Shaft extension with standard dimensions, without feather keyway	K42		вњ“	вњ“		вњ“	вњ“
Concentricity of shaft extension in accordance with DIN 42955 Tolerance R	L39		вњ“	вњ“	вњ“	вњ“	вњ“
Standard shaft made of stainless steel	M65					вњ“	вњ“
Non-standard cylindrical shaft extension	Y55 вЂў and identification code		вњ“	вњ“	вњ“	вњ“	вњ“
Heating and ventilation
Fan cover for textile industry	H17					вњ“	вњ“
Metal external fan	K35		вњ“	вњ“	вњ“	вњ“	вњ“
Anti-condensation heating for 230 V	K45			вњ“	вњ“
Anti-condensation heating for 115 V	K46			вњ“	вњ“
Anti-condensation heating, Ex. 115 V	M14					вњ“	вњ“
Anti-condensation heating, Ex. 230 V	M15					вњ“	вњ“
Separately driven fan with non-standard voltage and/or frequency	Y81 вЂў and identification code				вњ“		вњ“
Rating plate and extra rating plates
Second lubrication plate, loose	B06		вњ“	вњ“	вњ“	вњ“	вњ“
Second rating plate, loose	K31		вњ“	вњ“	вњ“	вњ“	вњ“
Rating plate, stainless steel	M40	New!				вњ“	вњ“
Extra rating plate or rating plate with deviating rating plate data	Y80 вЂў and identification code		вњ“	вњ“	вњ“	вњ“	вњ“
Extra rating plate with identification codes	Y82 вЂў and identification code		вњ“	вњ“	вњ“	вњ“	вњ“
Additional information on rating plate and on package label (max. 20 characters)	Y84 вЂў and identification code		вњ“	вњ“	вњ“	вњ“	вњ“
Packaging, safety notes, documentation and test certificates
Acceptance test certificate 3.1 in acc. with EN 10204	B02		вњ“	вњ“	вњ“	вњ“	вњ“
Printed German/English Operating Instructions enclosed	B23		вњ“	вњ“	вњ“	вњ“	вњ“
Printed Operating Instructions (Compact) for explosion-proof motors enclosed in English and German	–	New!	вњ“	вњ“	вњ“	вњ“	вњ“
Printed Operating Instructions (Compact) for explosion-proof motors enclosed in French, Spanish, Italian and Czech	B25	New!	вњ“	вњ“	вњ“	вњ“	вњ“
Printed Operating Instructions (Compact) for explosion-proof motors enclosed in Swedish, Danish, Dutch and Finnish	B26	New!	вњ“	вњ“	вњ“	вњ“	вњ“
Printed Operating Instructions (Compact) for explosion-proof motors enclosed in other official EU languages	Y98 вЂў and identification code	New!	вњ“	вњ“	вњ“	вњ“	вњ“
Type test with heat run for horizontal motors, with acceptance	F83					вњ“	вњ“
Wire-lattice pallet	L99		вњ“	вњ“	вњ“	вњ“	вњ“
Connected in star for dispatch	M32					вњ“	вњ“
Connected in delta for dispatch	M33					вњ“	вњ“

Overview special versions for SIMOTICS XP 1MD

Special versions	Additional identification code -Z with order code and plain text if required	Ex de
		Cast-iron series
Electrical special designs / Winding protection
Motor protection with 3 PTC thermistors for switching-off - without lightning arresters, sole protection not included	A11	вњ“
Motor protection with 2 x 3 PTC thermistors for prewarning / switching-off - without lightning arresters,	A12	вњ“
sole protection not included	A15	вњ“
Motor protection with 3 PTC thermistors for switching-off as sole protection with inverter (TMS)	A16	вњ“
Motor protection with 2 x 3 PTC thermistors for prewarning/switching-off as sole protection with inverter (TMS)	A42	вњ“
2 double resistance thermometers PT100 for 4-wire connection from terminal box, rolling-contact bearing -	A64	вњ“
1 x DE and 1 x NDE	C22	вњ“
6 PT100 resistance thermometers in stator winding, 3-wire circuit from terminals of the auxiliary terminal box	C23	вњ“
Coating / Colour
Coating system N08 - 110µm (C3-medium) - Corrosion category acc. to EN/ISO 12944-5 = C3	V09	Standard version
Coating system N14/J08 - 170µm (Chemical industry + On Shore, C5 - Industrial climate) -	V10	вњ“
Corrosion category acc. to EN/ISO 12944-5 = C5 (5-15 years) for industrial climate	W14	вњ“
Coating system N14A (Chemical + On Shore, C5 - Industry) -	V11	вњ“
Corrosion category acc. to EN/ISO 12944-5 = C5 (5-15 years) for industrial climate	K24	вњ“
Coating system Z21/J08 - 210µm (Off Shore, C5M-M) -	K23	вњ“
Corrosion category acc. to EN/ISO 12944-5 = C5 (5-15 years) - sea-climate	Y54 вЂў and special coating RAL ....	вњ“
Without coating, but primed	Y51 вЂў and special coating RALвЂ¦	вњ“
Special mechanical designs
Terminal box on right hand side ( view onto DE )	K09	вњ“
Terminal box on left hand side ( view onto DE )	K10	вњ“
Terminal box on top	K11	Standard version
1 x cable gland standard for not armoured cable - for main terminal box	K54	вњ“
One cable gland standard thread size for auxiliary connection 1 pc. (not armoured cable)	W33	вњ“
Main terminal box flameproof Ex d II C	K53	вњ“
Additional terminal box Ex d II C made of grey cast iron - only in combination with V43	V43	вњ“
Cable gland standard in Ex d (not armoured cable) 1 pc. - only in combination with K53, exact cable data needed	W91	вњ“
Additional terminal box Ex e - design / grey cast iron - not in combination with K53 (Ex d-terminal box)	W72	вњ“
Separate auxiliary box terminal for space heater	M52	вњ“
Cable entry side DE	K83	вњ“
Cable entry side NDE	K84	вњ“
Turn of the terminal box about 180°	K85	вњ“
Vibration severity grade A - IEC 60034-14	K01	Standard version
Vibration severity grade B - IEC 60034-14 - if inverter duty for smallest and highest speed of speed range only	K02	вњ“
Bearing for increased lateral forces (roller bearing DE) including regreasing device - including K40	K20	вњ“
Metal external fan	K35	вњ“
Regreasing device DE/NDE	K40	вњ“
Bearing insulation NDE for antifriction bearing - binding for frame size 315 - 355 at inverter operation	L27	вњ“
Fixed bearing DE	K94	Standard version
VIK design - incl. W14, W69	K30	вњ“
Second rating plate separately	K31	вњ“
Second rating plate installed in terminal box	W47	вњ“
Additional plate with data at inverter duty - data for quadratic torque speed range 1:10 and constant torque in speed range 1:3 and 1:10	Y80 вЂў and identification code	вњ“
Additional plate for customer data (each plate) - data / text have to be give with order	Y82 вЂў and identification code	вњ“
Space heater 210 - 250 V (min. 200 V, max. 264 V)	M13	вњ“
Enclosure IP56	K51	вњ“
Enclosure IP65	K50	вњ“
Operation for both rotations - from 355 in 2-/4-pole increased noise level and reduced power	K99	Standard version
Clockwise rotation viewed to DE - direction of rotation is mandatory for motors frame size 355 in 2-/4-pole design	K97	вњ“
Anti-clockwise rotation viewed to DE - direction of rotation is mandatory for motors frame size 355 in 2-/4-pole design	K98	вњ“
Noise reduction: silencer for air inlet (GG3) - only in combination with K97 or K98	L20	вњ“
Stainless steel screws and plates	W71	вњ“
SPM bearing monitoring: Measuring nipple system 32 - thread M8, DE + NDE	G50	вњ“
Version for gas – Group IIC, but stamped IIB	M99	вњ“
Test options
Routine test to IEC (sine-wave voltage)	F00	вњ“
Extension of the liability for defects
Extension of the liability for defects by 12 months to a total of 24 months from delivery	Q80	вњ“
Extension of the liability for defects by 18 months to a total of 30 months from delivery	Q81	вњ“
Extension of the liability for defects by 24 months to a total of 36 months from delivery	Q82	вњ“
Individual certifications
China Energy Efficiency Label – relevant for outputs from 0.75 to 375 kW	D34	вњ“
Design according to GOST-R – incl. GOSGOR Technadzor	D35	вњ“
IEC Ex certificate	D37	вњ“
Ex certification for India (PESO – CCOE)	D38	вњ“
Design for Zones to ATEX
Design in double protection additionally for dust, Zone 22 for mains-fed operation, no hybrid certification – non-conductive dust	W20	вњ“
Design in double protection additionally for dust, Zone 21 for mains-fed operation, no hybrid certification – design and certification for conductive dust (incl. non-conductive dust)	W21	вњ“
Documentation
Terminal box drawing	U08	вњ“
Inspection certificate 3.1 EN10204 (multi)	U51	вњ“
Type test report (original motor)	U52	вњ“
Documentation package NM2	U91	вњ“
Documentation in English	D76	вњ“
Documentation in German	D00	вњ“

Overview special versions for SIMOTICS XP 1MB

Special versions	Additional identification code -Z with order code and plain text if required	Ex n/Ex t
		Aluminum series
Motor connection and connection box
Rotation of the connection box through 90°, entry from DE	R10	вњ“
Rotation of the connection box through 90°, entry from NDE	R11	вњ“
Drehen des Anschlusskastens um 180°	R12	вњ“
Rotation of the connection box through 180°	R18	вњ“
Larger connection box	R50	вњ“
Windings and insulation
Temperature class 155 (F), utilized according to 130 (B), coolant temperature 45 °C, derating 4 %	N05	вњ“
Temperature class 155 (F), utilized according to 130 (B), coolant temperature 50 °C, derating 8 %	N06	вњ“
Temperature class 155 (F), utilized according to 130 (B), coolant temperature 55 °C, derating 13 %	N07	вњ“
Temperature class 155 (F), utilized according to 130 (B), coolant temperature 60 °C, derating 18 %	N08	вњ“
Increased air humidity/temperature with 30 to 60 g water per m³ of air	N20	вњ“
Increased air humidity/temperature with 60 to 100 g water per m³ of air	N21	вњ“
Temperature class 155 (F), utilized acc. to 130 (B), with higher coolant temperature and/or site altitude	Y50 вЂў and specified output, CT .. °C or SA вЂ¦. m above sea level	вњ“
Colors and paint finish
Unpainted (only cast-iron parts primed)	S00	вњ“
Unpainted, only primed	S01	вњ“
Special finish sea air resistant	S03	вњ“
Special finish in special RAL colors	Y51 вЂў and special finish RAL вЂ¦.	вњ“
Special finish in other standard RAL colors	Y54 вЂў and special finish RAL вЂ¦.вЂ¦.	вњ“
Mechanical design and degrees of protection
Low-noise version for 2-pole motors with clockwise direction of rotation	F77	вњ“
Low-noise version for 2-pole motors with counter-clockwise direction of rotation	F78	вњ“
Vibration-proof version	H02	вњ“
Condensation drainage holes sealed	H03	вњ“
Rust-resistant screws (externally)	H07	вњ“
IP65 degree of protection	H20	вњ“
IP56 degree of protection	H22	вњ“
Drive-end seal for flange-mounting motors, oil-tight to 0.1 bar	H23	вњ“
Coolant temperature
Coolant temperature -40 to +40 °C	D03	вњ“
Designs in accordance with standards and specifications
Electrical according to NEMA MG1-12	D30	вњ“
Design for Zones according to ATEX
Design (IP55) for Zone 2 and 22, for non-conductive dust, for mains-fed operation	B30	вњ“
Design for Zone 2 in Ex nA IIB T3 Gc	B31	вњ“
VIK design marked with Ex nA II on rating plate	C02	вњ“
Bearings and lubrication
Located bearing DE	L20	вњ“
Located bearing NDE	L21	вњ“
Bearing design for increased cantilever forces	L22	вњ“
Regreasing device	L23	вњ“
Measuring nipple for SPM shock pulse measurement for bearing inspection	Q01	вњ“
Balance and vibration quantity
Vibration quantity level B	L00	вњ“
Full-key balancing	L02	вњ“
Balancing without feather key, feather key is supplied	L01	вњ“
Shaft and rotor
Shaft extension with standard dimensions, without feather keyway	L04	вњ“
Second standard shaft extension	L05	вњ“
Standard shaft made of stainless steel	L06	вњ“
Concentricity of shaft extension in accordance with DIN 42955 Tolerance R, see section "Shaft and rotor"	L07	вњ“
Concentricity of shaft extension, coaxiality and linear movement in accordance with DIN 42955 Tolerance R for flange-mounting motors, see section"Shaft and rotor"	L08	вњ“
Non-standard cylindrical shaft extension, DE	Y58 вЂў and identification code	вњ“
Non-standard cylindrical shaft extension, NDE	Y59 вЂў and identification code	вњ“
Heating and ventilation
Metal external fan	F76	вњ“
Anti-condensation heating for 230 V	Q02	вњ“
Anti-condensation heating for 115 V	Q03	вњ“
Rating plate and extra rating plates
Second lubrication plate, supplied loose	B06	вњ“
Second rating plate, supplied loose	M10	вњ“
Rating plate, stainless steel	M11	вњ“
Extra rating plate or rating plate with deviating rating plate data (rated data only, e.g. voltage, output, speed)	Y80 вЂў and identification code	вњ“
Extra rating plate with identification codes	Y82 вЂў and identification code	вњ“
Additional information on rating plate and on package label (max. 20 characters)	Y84 вЂў and identification code	вњ“
Packaging, safety notes, documentation and test certificates
Acceptance test certificate 3.1 in accordance with EN 10204	B02	вњ“
Printed German/English operating instructions enclosed	B04	вњ“
Type test with heat run for horizontal motors, with acceptance	B83	вњ“
Wire-lattice pallet packaging	B99	вњ“
Connected in star for dispatch	M01	вњ“
Connected in delta for dispatch	M02	вњ“
Printed Operating Instructions (compact) for explosion-proof motors enclosed in other official EU languages	Y98 вЂў and identification code	вњ“

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания