|
| | | |
Pre-assembled DRIVE-CLiQ signal cables without 24VDC coresType | Length | Dmax | Degree of protection
Connector | DRIVE-CLiQ signal cable
without 24VDCcores |
|---|
| m (ft) | mm (in) | | Article No. | Fixed lengths  | 0.11 (0.36) | | IP20/IP20 | 6SL3060‑4AB00‑0AA0 | 0.16 (0.52) | 6SL3060‑4AD00‑0AA0 | 0.21 (0.69) | 6SL3060‑4AF00‑0AA0 | 0.26 (0.85) | 6SL3060‑4AH00‑0AA0 | 0.31 (1.02) | 6SL3060‑4AK00‑0AA0 | 0.36 (1.18) | 6SL3060‑4AM00‑0AA0 | 0.41 (1.35) | 6SL3060‑4AP00‑0AA0 | 0.60 (1.97) | 6SL3060‑4AU00‑0AA0 | 0.95 (3.12) | 6SL3060‑4AA10‑0AA0 | 1.20 (3.94) | 6SL3060‑4AW00‑0AA0 | 1.45 (4.76) | 6SL3060‑4AF10‑0AA0 | 2.80 (9.19) | 6SL3060‑4AJ20‑0AA0 | 5.00 (16.4) | 6SL3060‑4AA50‑0AA0 | To the decimeter  | max.70 (230) | 7.0 | IP20/IP20 | 6FX2002‑1DC00‑.... | Length code | .... |
Pre-assembled MOTION-CONNECT DRIVE-CLiQ signal cables with 24VDC coresType | Usage | Length, max. | Dmax | Degree of protection
Connector | MOTION-CONNECT
DRIVE-CLiQ signal cable
with 24VDC cores |
|---|
| | m (ft) | mm (in) | | Article No. | To the decimeter  | For built-in or built-on encoder systems with DRIVE-CLiQ. For example, for making the connection between SIMOTICS motors and SINAMICS S120 Motor Modules or Power Modules. | 75 (246) | 7.1 (0.28) | IP20/IP67 | 6FX8002‑2DC10‑.... | 100 (328) | 7.1 (0.28) | IP20/IP67 | 6FX5002‑2DC10‑.... | MOTION‑CONNECT500 | 5 | MOTION‑CONNECT800PLUS | 8 | Length code | .... |
Pre-assembled signal cables for direct or external measuring systems with full-thread connectorEncoder system | Connection via | Length, max. | Dmax | Degree of protection
Connector1) | Basic cable | Extension |
|---|
| | m (ft) | mm (in) | | ArticleNo. | ArticleNo. | Absolute encoder with EnDat | SMC20 | 100 (328) | 9.8 (0.39) | IP20/IP67 | 6FX❑002‑2EQ10‑.... | 6FX❑002‑2EQ14‑.... | Absolute encoder with EnDat
6FX2001-5.E.. | SMC20 | 100 (328) | 9.2 (0.36) | IP20/IP67 | 6FX❑002‑2CH00‑.... | 6FX❑002‑2AD04‑.... | Absolute encoder with SSI
6FX2001-5.S..
24VDC
Clock-pulse rate 100...250kHz | SMC30 | 100 (328) | 9.3 (0.37) | IP20/IP67 | 6FX❑002‑2CC11‑.... | 6FX❑002‑2CB54‑.... | Incremental encoder sin/cos1Vpp
2048S/R, with CandDtracks | SMC20 | 100 (328) | 9.8 (0.39) | IP20/IP67 | 6FX❑002‑2CA31‑.... | 6FX❑002‑2CA34‑.... | Incremental encoder sin/cos1Vpp
256 and 512S/R, without CandDtracks | SMC20 | 50 (164) | 9.2 (0.36) | IP20/IP67 | 6FX8002‑2CA80‑.... | 6FX❑002‑2CA34‑.... | HTL incremental encoder | SMC30 | 3002) | 9.3 (0.37) | IP20/IP67 | 6FX❑002‑2AH00‑.... | 6FX❑002‑2AH04‑.... | Incremental encoder sin/cos1Vpp without CandDtracks
6FX2001-3 | SMC20 | 50 (164) | 9.3 (0.37) | IP20/IP67 | 6FX❑002‑2CG00‑.... | 6FX❑002‑2CB54‑.... | HTL incremental encoder
24VDC
6FX2001‑4 | SMC30 | 100 (328) | 9.3 (0.37) | /IP67 | 6FX5002‑2CA12‑.... | | TTL incremental encoder RS422
6FX2001‑2 | | | | | | | | SMC30 | 100 (328) | 9.3 (0.37) | IP20/IP67 | 6FX❑002‑2CR00‑.... | 6FX❑002‑2CB54‑.... | | SMC30 | 100 (328) | 9.3 (0.37) | IP20/IP67 | 6FX❑002‑2CD24‑.... | 6FX❑002‑2CB54‑.... | MOTION‑CONNECT500 | 5 | 5 | MOTION‑CONNECT800PLUS | 8 | 8 | Length code | .... | .... |
1)The specification of the degree of protection refers to the basic cable. 2)Applicable to HTL encoders with bipolar signal evaluation or for evaluation of the difference signals A*, A and B*, B; for HTL encoders with unipolar signal evaluation, the permissible cable length is reduced to 100m. The combinations of signal cable extensions shown are only provided by way of example. The maximum specified cable length (basic cable and extensions) must not be exceeded. The total maximum length is reduced by 2m (6.56ft) for each interruption point.
|
|
