The following are located on the TM15 Terminal Module:

• 24 bidirectional digital inputs/outputs (isolation in 3 groups with 8 channels each)
• 24 green status LEDs for indicating the logical signal status of the relevant terminal
• 2 DRIVE-CLiQ sockets
• 1 connection for the electronics power supply via the 24 V DC power supply connector
• 1 PE/protective conductor connection

The TM15 Terminal Module can be snapped onto a TH 35 mounting rail in accordance with EN 60715 (IEC 60715).

The signal cable shield can be connected to the TM15 Terminal Module via a shield connection terminal, e.g. Phoenix Contact type SK8 or WeidmГјller type KLBГњ CO 1. The shield connection terminal must not be used for strain relief.

The status of the TM15 Terminal Module is indicated via a multi-color LED.