Motor Modules in chassis format . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Motor Modules in chassis format

| | | | |

Line voltage 380 ... 480 V 3 AC DC link voltage 510 ... 720 V DC		Motor Modules in chassis format
		6SL3720-1TE32-1AA3	6SL3720-1TE32-6AA3	6SL3720-1TE33-1AA3	6SL3720-1TE33-8AA3	6SL3720-1TE35-0AA3	6SL3720-1TE36-1AA3
Type rating
At I_L (50 Hz 400 V) ¹⁾	kW	110	132	160	200	250	315
At I_H (50 Hz 400 V) ¹⁾	kW	90	110	132	160	200	250
At I_L (60 Hz 460 V) ²⁾	hp	150	200	250	300	400	500
At I_H (60 Hz 460 V) ²⁾	hp	150	200	200	250	350	350
Output current
Rated current I_rated O	A	210	260	310	380	490	605
Base-load current I_L³⁾	A	205	250	302	370	477	590
Base-load current I_H⁴⁾	A	178	233	277	340	438	460
Maximum current I_max O	A	307	375	453	555	715	885
DC link current
Rated current I_rated DC when supplied via
Basic/Smart Line Module	A	252	312	372	456	588	726
Active Line Module	A	227	281	335	411	529	653
Base-load current I_L DC ³⁾ when supplied via
Basic/Smart Line Module	A	245	304	362	444	573	707
Active Line Module	A	221	273	326	400	515	636
Base-load current I_{H DC}⁴⁾ when supplied via
Basic/Smart Line Module	A	224	277	331	405	523	646
Active Line Module	A	202	250	298	365	470	581
Current demand
24 V DC auxiliary power supply	A	0.8	0.8	0.9	0.9	0.9	1.0
400 V AC	A	0.63	1.13	1.8	1.8	1.8	3.6
DC link capacitance	ОјF	4200	5200	6300	7800	9600	12600
Pulse frequency ⁵⁾
Rated frequency	kHz	2	2	2	2	2	1.25
Pulse frequency, max.
Without current derating	kHz	2	2	2	2	2	1.25
With current derating	kHz	8	8	8	8	8	7.5
Power loss, max. ⁶⁾
At 50 Hz 400 V	kW	1.86	2.5	2.96	3.67	4.28	5.84
At 60 Hz 460 V	kW	1.94	2.6	3.1	3.8	4.5	6.3
Cooling air requirement	m³/s	0.17	0.23	0.36	0.36	0.36	0.78
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	67	69	69	69	69	72
Motor connection U2, V2, W2		M12 screws	M12 screws	M12 screws	M12 screws	M12 screws	M12 screws
Conductor cross section, max. (IEC)	mm²	2 Г— 185	2 Г— 185	2 Г— 240	2 Г— 240	2 Г— 240	4 Г— 240
Cable length, max. ⁷⁾
Shielded	m	300	300	300	300	300	300
Unshielded	m	450	450	450	450	450	450
PE/GND connection		PE bar	PE bar	PE bar	PE bar	PE bar	PE bar
Busbar cross-section	mm²	600	600	600	600	600	600
Conductor cross section, max. (IEC)	mm²	240	240	240	240	240	240
Degree of protection		IP20	IP20	IP20	IP20	IP20	IP20
Dimensions
Width ⁸⁾	mm	400	400	400	400	400	600
Height ⁹⁾	mm	2200	2200	2200	2200	2200	2200
Depth	mm	600	600	600	600	600	600
Weight, approx.	kg	145	145	286	286	286	490
Frame size		FX	FX	GX	GX	GX	HX
Short-circuit current rating according to IEC	kA	65	65	65	65	65	65

¹⁾ Rated output of a typical 6-pole standard induction motor based on I_L or I_H for 400 V 3 AC 50 Hz.

²⁾ Rated output of a typical 6-pole standard induction motor based on I_L or I_H for 460 V 3 AC 60 Hz.

³⁾ The base-load current I_L is based on a load cycle of 110 % for 60 s or 150 % for 10 s with a load cycle duration of 300 s.

⁴⁾ The base-load current I_H is based on a duty cycle of 150 % for 60 s or 160 % for 10 s with a duty cycle duration of 300 s.

⁵⁾Information regarding the correlation between the pulse frequency and max. output current/output frequency is provided in the SINAMICS Low Voltage Engineering Manual.

⁶⁾ The specified power loss represents the maximum value at 100% utilization. The value is lower under normal operating conditions.

⁷⁾ Total of all motor cables. Longer cable lengths for specific configurations are available on request. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual.

⁸⁾ With option L10 (dv/dt filter plus VPL):- Frame sizes FX/GX/HX/JX: Additional cabinet 600 mm wide

With option L34 (circuit breaker on the output side):- Frame size FX/GX: Additional cabinet 400 mm wide

- Frame size HX/JX: Additional cabinet 600 mm wide.

⁹⁾ The cabinet height increases by 250 mm with degree of protection IP21, and by 400 mm with degrees of protection IP23, IP43 and IP54.

Line voltage 380 ... 480 V 3 AC DC link voltage 510 ... 720 V DC		Motor Modules in chassis format
		6SL3720-1TE37-5AA3	6SL3720-1TE38-4AA3	6SL3720-1TE41-0AA3	6SL3720-1TE41-2AA3	6SL3720-1TE41-4AA3
Type rating
At I_L (50 Hz 400 V) ¹⁾	kW	400	450	560	710	800
At I_H (50 Hz 400 V) ¹⁾	kW	315	400	450	560	710
At I_L (60 Hz 460 V) ²⁾	hp	600	700	800	1000	1150
At I_H (60 Hz 460 V) ²⁾	hp	450	600	700	900	1000
Output current
Rated current I_rated O	A	745	840	985	1260	1405
Base-load current I_L³⁾	A	725	820	960	1230	1370
Base-load current I_H⁴⁾	A	570	700	860	1127	1257
Maximum current I_max O	A	1087	1230	1440	1845	2055
DC link current
Rated current I_rated DC when supplied via
Basic/Smart Line Module	A	894	1008	1182	1512	1686
Active Line Module	A	805	907	1064	1361	1517
Base-load current I_L DC ³⁾ when supplied via
Basic/Smart Line Module	A	871	982	1152	1474	1643
Active Line Module	A	784	884	1037	1326	1479
Base-load current I_{H DC}⁴⁾ when supplied via
Basic/Smart Line Module	A	795	897	1051	1345	1500
Active Line Module	A	716	807	946	1211	1350
Current demand
24 V DC auxiliary power supply	A	1.0	1.0	1.25	1.4	1.4
400 V AC	A	3.6	3.6	5.4	5.4	5.4
DC link capacitance	ОјF	15600	16800	18900	26100	28800
Pulse frequency ⁵⁾
Rated frequency	kHz	1.25	1.25	1.25	1.25	1.25
Pulse frequency, max.
Without current derating	kHz	1.25	1.25	1.25	1.25	1.25
With current derating	kHz	7.5	7.5	7.5	7.5	7.5
Power loss, max. ⁶⁾
At 50 Hz 400 V	kW	6.68	7.15	9.5	11.1	12.0
At 60 Hz 460 V	kW	7.3	7.8	10.2	12.0	13.0
Cooling air requirement	m³/s	0.78	0.78	1.08	1.08	1.08
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	72	72	72	72	72
Motor connection U2, V2, W2		M12 screws	M12 screws	M12 screws	M12 screws	M12 screws
Conductor cross section, max. (IEC)	mm²	4 Г— 240	4 Г— 240	6 Г— 240	6 Г— 240	6 Г— 240
Cable length, max. ⁷⁾
Shielded	m	300	300	300	300	300
Unshielded	m	450	450	450	450	450
PE/GND connection		PE bar	PE bar	PE bar	PE bar	PE bar
Busbar cross-section	mm²	600	600	600	600	600
Conductor cross section, max. (IEC)	mm²	240	240	240	240	240
Degree of protection		IP20	IP20	IP20	IP20	IP20
Dimensions
Width ⁸⁾	mm	600	600	800	800	800
Height ⁹⁾	mm	2200	2200	2200	2200	2200
Depth	mm	600	600	600	600	600
Weight, approx.	kg	490	490	700	700	700
Frame size		HX	HX	JX	JX	JX
Short-circuit current rating according to IEC	kA	65	84	84	100	100