Motor Modules are controlled by the CU320‑2 DP or CU320‑2 PN Control Unit. Communication between the Control Unit and Modules is established via a DRIVE‑CLiQ connection.

If the Control Unit is integrated in the same cabinet as an option with order code K90 or K95, these communication cables will already be installed. If the Control Unit is to be mounted externally, the DRIVE‑CLiQ cable will not be included in the scope of delivery and must be configured on site.

For additional information, please refer to the SINAMICS Low Voltage Engineering Manual.

For a description of the terminal block, see section Customer terminal block -X55.

Connection example: Motor Module in chassis format