SINAMICS G120P Cabinet, 110 kW to 630 kW . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SINAMICS G120P Cabinet, 110 kW to 630 kW

| | | | | | | | | |

SINAMICS G120P Cabinet, 75 kW to 630 kW

The most important directives and standards are listed below. These are used as basis for the SINAMICS G120P Cabinet drive inverter cabinet units and they must be carefully observed to achieve an EMC-compliant configuration that is safe both functionally and in operation.

European directives
2014/35/EU	Low-voltage directive: Directive of the European Parliament and Council of February 26, 2014 for the harmonization of the laws of the member states relating to the provision of electrical equipment designed for use within certain voltage limits on the market (amended version)
2014/30/EU	EMC directive: Directive of the European Parliament and Council of February 26, 2014 for the harmonization of the laws of the member states relating to electromagnetic compatibility (amended version)
2006/42/EC	Machinery directive: The directive of the European Parliament and Council of May 17, 2006 on machinery and for changing Directive 95/16/EC (amendment)
European standards
EN 60146?1?1	Semiconductor converters – General requirements and line-commutated converters Part 1?1: Specification of basic requirements
EN 60204?1	Electrical equipment of machines Part 1: General requirements
EN 60529	Degrees of protection provided by enclosures (IP code)
EN 61800?2	Adjustable speed electrical power drive systems Part 2: General requirements – Rating specifications for low-voltage adjustable frequency a.c. power drive systems
EN 61800?3	Adjustable speed electrical power drive systems Part 3: EMC product standard including specific test methods
EN 61800-5-1	Adjustable speed electrical power drive systems Part 5: Safety requirements Main section 1: Electrical and thermal requirements

General technical specifications
Electrical specifications
Line voltages and power ranges	380 ... 480 V 3 AC ±10 %, 110 ... 560 kW (148 ... 751 hp) 500 ... 690 V 3 AC ±10 %, 500 ... 630 kW (671 ... 845 hp)
Output ranges	110 ... 560 kW (148 ... 751 hp)
Line system configurations	Grounded TN/TT systems and non-grounded IT systems
Line frequency	47 ... 63 Hz
Output frequency	0 ... 100 Hz
Offset factor cos ?	0.96
Power factor ?	0.75 ... 0.93
Efficiency	>98%
Overvoltage category	III to EN 61800?5?1
Closed-loop control modes	Vector control without sensor or U/f control
Fixed speeds	15 fixed speeds plus 1 minimum speed, parameterizable (in the default setting, 3 fixed setpoints plus 1 minimum speed are selectable using terminal block/fieldbus system)
Skipped speed ranges	4, parameterizable
Setpoint resolution of the Control Unit	0.01 Hz 12 bit analog
Braking operation	DC braking, dynamic braking with optional Braking Module
Mechanical specifications
Degree of protection	IP20 (higher degrees of protection up to IP54 optional)
Protection class	I acc. to EN 61800?5?1
Touch protection	According to EN 50274 and BGV A3 when used as intended
Cabinet system	Schafer IS?1, doors with double-barb lock, base plates with cable entry possibilities, crane transport aid
Paint finish	RAL 7035 (indoor requirements)
Type of cooling	Forced air cooling AF to EN 60146
Ambient conditions	Storage	Transport	Operation
Ambient temperature	-25 ... +55 °C	-25 ... +70 °C above -40 °C for 24 hours	0 ... 40 °C (32 ... 104 °F) up to 50 °C (122 °F) see derating data
Relative humidity (condensation not permissible)	5 ... 95 % Class 1K4 to EN 60721?3?1	5 ... 95 % Class 2K3 to EN 60721?3?2	5 ... 95 % Class 3K3 to EN 60721?3?3
Environmental class/harmful chemical substances	Class 1C2 acc. to EN 60721?3?1	Class 2C2 acc. to EN 60721?3?2	Class 3C2 acc. to EN 60721?3?3
Organic/biological influences	Class 1B1 acc. to EN 60721?3?1	Class 2B1 acc. to EN 60721?3?2	Class 3B1 according to EN 60721?3?3 Restriction: No conductive dust particles permitted
Degree of pollution	2 acc. to EN 61800?5?1
Installation altitude	Up to 1000 m (3281 ft) above sea level without derating > 1000 m (3281 ft) see derating data
Mechanical strength	Storage	Transport ²⁾	Operation
Vibratory load	Class 1M2 acc. to EN 60721?3?1	Class 2M2 acc. to EN 60721?3?2	Class 3M2 acc. to EN 60721?3?3
Deflection	1.5 mm at 5 ... 9 Hz	3.5 mm at 2 ... 9 Hz	0.075 mm at 10 ... 58 Hz
Acceleration	5 m/s² at > 9 ... 200 Hz	10 m/s² at > 9 ... 200 Hz	10 m/s² at > 58 ... 200 Hz
Shock load	Class 1M2 acc. to EN 60721?3?1	Class 2M2 acc. to EN 60721?3?2	Class 3M2 acc. to EN 60721?3?3
Acceleration	40 m/s² at 22 ms	150 m/s² at 11 ms	50 m/s² (5 ? g)/30 ms 150 m/s² (15 ? g)/11 ms
Standards
Compliance with standards	cULus, CE, RCM, EAC, KC, SEMI F47 ³⁾
CE marking	According to EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC
Radio interference suppression	The SINAMICS G120P Cabinet inverter systems are not designed for connection to the public power network ("first environment"). Radio interference suppression is compliant with the EMC product standard for variable-speed drives EN 61800-3 "Second environment" (industrial line supplies). The equipment can cause electromagnetic interference when it is connected to the public network. However, if supplementary measures are taken (e.g. line filter, see option L00) operation in the "first environment" is possible.

Deviations from the specified classes are underlined.

¹⁾ For the option L01, the line voltage is limited to 380 to 415 V AC ± 10%.

²⁾ In transport packaging.

³⁾ SEMI F47 for frame size JX available soon

Line voltage 380 ... 480 V 3 AC		SINAMICS G120P Cabinet drive inverter cabinet units
		6SL3710-1PE32?1.A0-Z	6SL3710-1PE32?5.A0-Z	6SL3710-1PE33?0.A0-Z	6SL3710-1PE33?7.A0-Z	6SL3710-1PE34?6.A0-Z
Rated power
At I_L400 V/50 Hz ¹⁾	kW	110	132	160	200	250
At I_L460 V/60 Hz ²⁾	hp	125	150	200	250	300
At I_H400 V/50 Hz ¹⁾	kW	90	110	132	160	200
At I_H460 V/60 Hz ²⁾	hp	100	100	150	200	200
Output current
Rated current I_rated (400 V ±10 %)	A	205	245	300	370	460
Rated current I_rated (480 V ±10 %)	A	160	184	245	308	369
Base-load current I_L (400 V ±10 %) ³⁾	A	200	240	290	360	450
Base-load current I_L (480 V ±10 %) ³⁾	A	156	180	240	302	361
Base-load current I_H (400 V ±10 %) ⁴⁾	A	164	196	240	296	368
Base-load current I_H (480 V ±10 %) ⁴⁾	A	128	147	196	247	295
Output current, max.	A	270	324	392	486	608
Input current
Rated current I_rated (400 V ±10 %) ⁵⁾	A	218	262	317	375	469
Rated current I_rated (480 V ±10 %) ⁵⁾	A	171	197	262	314	376
Base-load current I_L (400 V ±10 %) ³⁾	A	213	257	307	365	459
Base-load current I_L (480 V ±10 %) ³⁾	A	167	193	257	308	368
Base-load current I_H (400 V ±10 %) ⁴⁾	A	175	210	254	300	375
Base-load current I_H (480 V ±10 %) ⁴⁾	A	137	157	210	251	301
Input current, max.	A	288	347	415	493	620
Current requirement, 24 V DC auxiliary power supply ⁶⁾
Version A	A	1	1	1	1	1
Version C	A	0.5	0.5	0.5	0.5	0.5
Short-circuit current rating acc. to IEC in conjunction with the specified fuses without/with Option L26	kA	65/65	65/65	65/65	65/65	65/50
Minimum short-circuit current ⁷⁾
For 3NE1 fuses	A	3000	3600	4400	5200	7000
For 3NA3 fuses	A	5800	7300	9500	14000	20000
Power loss, max. at I_rated (400 V/40 °C)
Version A	kW	3.377	3.939	4.543	5.681	6.376
Version C	kW	2.831	3.255	3.901	4.777	5.482
Coolant		of air	of air	of air	of air	of air
Coolant requirements	m³/s (ft³/s)	0.21 (7.4)	0.21 (7.4)	0.21 (7.4)	0.21 (7.4)	0.21 (7.4)
Sound pressure level L_pA(1 m) at 50/60 Hz
Version A	dB	66/66	66/66	66/66	66/66	66/66
Version C	dB	63/63	63/63	63/63	63/63	63/63
Cable length, max. between Power Module and motor
When compliant with Categories C2 and C3 according to EN 61800?3 shielded	m (ft)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)	100 (328.10)
When non-compliant with the limit values for RI suppression and without output reactor unshielded	m (ft)	200 (656)	200 (656)	200 (656)	200 (656)	200 (656)
When non-compliant with the limit values for RI suppression with output reactor shielded/unshielded	m (ft)	300/450 (984.30/1476.45)	300/450 (984.30/1476.45)	300/450 (984.30/1476.45)	300/450 (984.30/1476.45)	300/450 (984.30/1476.45)
Dimensions
Width for version A/C	mm (in)	1000/600 (39.37/23.62)	1000/600 (39.37/23.62)	1000/600 (39.37/23.62)	1000/600 (39.37/23.62)	1000/600 (39.37/23.62)
Height⁸⁾	mm (in)	2000 (78.7)	2000 (78.7)	2000 (78.7)	2000 (78.7)	2000 (78.7)
Depth	mm (in)	600 (23.62)	600 (23.62)	600 (23.62)	600 (23.62)	600 (23.62)
Frame size		GX	GX	GX	GX	GX
Weight Versions A/C (degree of protection IP20, without options)	kg (lb)	360/290 (794/639)	360/290 (794/639)	370/290 (816/639)	380/300 (838/661)	400/300 (882/661)

¹⁾ Rated power of a typ. 4-pole standard induction motor based on base-load current I_L or I_H at 400 V 3 AC/50 Hz.

²⁾ Rated power of a typ. 4-pole standard induction motor based on base-load current I_L or I_H at 460 V 3 AC/60 Hz.

³⁾ The base-load current I_L is based on a duty cycle of 110% for 60 s or 135 % for 3 s with a duty cycle duration of 300 s (see overload capability characteristics).

⁴⁾ The base-load current I_H is based on a duty cycle of 150% for 60 s with a duty cycle duration of 300 s (see overload capability characteristics).

⁵⁾ The current values given here are based on the rated output current.

⁶⁾If the drive closed-loop control is still to remain active when the main line supply fails, then the equipment must be provided with an external 24 V DC supply.

⁷⁾ 10 ms value from current-time characteristic for reliable tripping of installed protection devices. If the minimum short circuit current is not reached, the tripping time of the fuses is increased, which can lead to damage.

⁸⁾Version A: The cabinet height increases by 300 mm with IP20 and IP21 degrees of protection, and by 400 mm with IP23, IP43 and IP54 degrees of protection.Version C: The cabinet height increases by 300 mm for IP21 degree of protection, and by 400 mm for IP23, IP43 and IP54 degrees of protection.

Note:

The power data in hp units are based on the NEC/CEC standards for the North American market.

Information on the line connection, motor connection and cabinet grounding can be found in section Cable cross-sections and connections.

Line voltage 380 ... 480 V 3 AC		SINAMICS G120P Cabinet drive inverter cabinet units
		6SL3710-1PE35?8.A0-Z	6SL3710-1PE36?6.A0-Z	6SL3710-1PE37?4.A0-Z
Rated power
At I_L400 V/50 Hz ¹⁾	kW	315	355	400
At I_L460 V/60 Hz ²⁾	hp	400	450	500
At I_H400 V/50 Hz ¹⁾	kW	250	250	315
At I_H460 V/60 Hz ²⁾	hp	300	300	350
Output current
Rated current I_rated (400 V ±10 %)	A	585	655	735
Rated current I_rated (480 V ±10 %)	A	487	526	602
Base-load current I_L (400 V ±10 %) ³⁾	A	570	640	720
Base-load current I_L (480 V ±10 %) ³⁾	A	477	515	590
Base-load current I_H (400 V ±10 %) ⁴⁾	A	468	491	551
Base-load current I_H (480 V ±10 %) ⁴⁾	A	390	394	452
Output current, max.	A	770	864	972
Input current
Rated current I_rated (400 V ±10 %) ⁵⁾	A	597	668	750
Rated current I_rated (480 V ±10 %) ⁵⁾	A	497	536	614
Base-load current I_L (400 V ±10 %) ³⁾	A	585	654	735
Base-load current I_L (480 V ±10 %) ³⁾	A	486	525	602
Base-load current I_H (400 V ±10 %) ⁴⁾	A	477	501	562
Base-load current I_H (480 V ±10 %) ⁴⁾	A	397	402	461
Input current, max.	A	785	881	992
Current requirement, 24 V DC auxiliary power supply⁶⁾
Version A	A	1	1	1
Version C	A	0.5	0.5	0.5
Short-circuit current rating acc. to IEC in conjunction with the specified fuses without/with Option L26	kA	65/50	65/50	65/50
Minimum short-circuit current ⁷⁾
For 3NE1 fuses	A	10000	11000	13000
For 3NA3 fuses	A	20000	30000	30000
Power loss, max. at I_rated (400 V/40 °C)
Version A	kW	8.478	9.443	9.907
Version C	kW	7.143	8.026	8.824
Coolant		of air	of air	of air
Coolant requirements	m³/s (ft³/s)	0.6 (21.2)	0.6 (21.2)	0.6 (21.2)
Sound pressure level L_pA(1 m) at 50/60 Hz
Version A	dB	69/69	69/69	69/69
Version C	dB	66/66	66/66	66/66
Cable length, max. between Power Module and motor
When compliant with Categories C2 and C3 according to EN 61800?3 shielded	m (ft)	100 (328.10)	100 (328.10)	100 (328.10)
When non-compliant with the limit values for RI suppression and without output reactor unshielded	m (ft)	200 (656.20)	200 (656.20)	200 (656.20)
When non-compliant with the limit values for RI suppression with output reactor shielded/unshielded	m (ft)	300/450 (984.30/1476.45)	300/450 (984.30/1476.45)	300/450 (984.30/1476.45)
Dimensions
Width for version A/C	mm (in)	1200⁹⁾/800	1200⁹⁾/800	1200⁹⁾/800
Height⁸⁾	mm (in)	2000 (78.7)	2000 (78.7)	2000 (78.7)
Depth	mm (in)	600 (23.62)	600 (23.62)	600 (23.62)
Frame size		HX	HX	HX
Weight Versions A/C (degree of protection IP20, without options)	kg (lb)	500/430 (1102/948)	500/440 (1102/970)	530/440 (1169/970)

¹⁾ Rated power of a typ. 4-pole standard induction motor based on base-load current I_L or I_H at 400 V 3 AC/50 Hz.

²⁾ Rated power of a typ. 4-pole standard induction motor based on base-load current I_L or I_H at 460 V 3 AC/60 Hz.

³⁾ The base-load current I_L is based on a duty cycle of 110% for 60 s or 135 % for 3 s with a duty cycle duration of 300 s (see overload capability characteristics).

⁴⁾ The base-load current I_H is based on a duty cycle of 150% for 60 s with a duty cycle duration of 300 s (see overload capability characteristics).

⁵⁾ The current values given here are based on the rated output current.

⁶⁾If the drive closed-loop control is still to remain active when the main line supply fails, then the equipment must be provided with an external 24 V DC supply.

⁸⁾ The cabinet height increases by 300 mm (11.81 in) for IP21 degree of protection, and by 400 mm (15.75 in) for IP23, IP43 and IP54 degrees of protection.

⁹⁾ The specified cabinet widths increase depending on the options selected. For details, see description of option L01.

Note:

The power data in hp units are based on the NEC/CEC standards for the North American market.

Information on the line connection, motor connection and cabinet grounding can be found in section Cable cross-sections and connections.

Line voltage 380 ... 480 V 3 AC		SINAMICS G120P Cabinet drive inverter cabinet units
		6SL3710-1PE38-4AA0-Z	6SL3710-1PE38-8AA0-Z	6SL3710-1PE41-0AA0-Z
Rated power
At I_L400 V/50 Hz ¹⁾	kW	450	500	560
At I_L460 V/60 Hz ²⁾	hp	500	600	700
At I_H400 V/50 Hz ¹⁾	kW	355	400	450
At I_H460 V/60 Hz ²⁾	hp	450	500	500
Output current
Rated current I_rated (400 V ±10 %)	A	840	910	1021
Rated current I_rated (480 V ±10 %)	A	677	739	847
Base-load current I_L (400 V ±10 %) ³⁾	A	820	890	1000
Base-load current I_L (480 V ±10 %) ³⁾	A	663	724	830
Base-load current I_H (400 V ±10 %) ⁴⁾	A	672	728	786
Base-load current I_H (480 V ±10 %) ⁴⁾	A	542	591	652
Output current, max.	A	1107	1202	1350
Input current
Rated current I_rated (400 V ±10 %) ⁵⁾	A	870	945	1061
Rated current I_rated (480 V ±10 %) ⁵⁾	A	702	767	880
Base-load current I_L (400 V ±10 %)³⁾	A	850	925	1039
Base-load current I_L (480 V ±10 %) ³⁾	A	687	751	862
Base-load current I_H (400 V ±10 %) ⁴⁾	A	696	756	816
Base-load current I_H (480 V ±10 %) ⁴⁾	A	561	614	677
Input current, max.	A	1147	1248	1402
Current requirement, 24 V DC auxiliary power supply ⁶⁾	A	1	1	1
Short-circuit current rating acc. to IEC in conjunction with the specified fuses without/with option L26	kA	65/65	65/65	65/65
Minimum short-circuit current ⁷⁾
For 3NE1 fuses	A	10400	14000	16000
For 3NA3 fuses	A	40000	40000	52000
Power loss, max. At I_rated (400 V/40 °C)	kW	10.95	11.354	12.997
Coolant		Air	Air	Air
Coolant requirements	m³/s (ft³/s)	0.7 (24.7)	0.7 (24.7)	0.7 (24.7)
Sound pressure level L_pA(1 m) at 50/60 Hz	dB	69/69	69/69	69/69
Cable length, max. between Power Module and motor
When compliant with Categories C2 and C3 according to EN 61800?3 shielded	m (ft)	100 (328)	100 (328)	100 (328)
When non-compliant with the limit values for RI suppression and without output reactor unshielded	m (ft)	200 (656)	200 (656)	200 (656)
When non-compliant with the limit values for RI suppression with output reactor shielded/unshielded	m (ft)	300/450 (984/1476)	300/450 (984/1476)	300/450 (984/1476)
Dimensions
Width	mm (in)	1200 (47.2) ⁹⁾	1200 (47.2) ⁹⁾	1200 (47.2) ⁹⁾
Height⁸⁾	mm (in)	2000 (78.7)	2000 (78.7)	2000 (78.7)
Depth	mm (in)	600 (23.6)	600 (23.6)	600 (23.6)
Frame size		JX	JX	JX
Weight (degree of protection IP20, without options)	kg (lb)	655 (1444)	676 (1490)	681 (1501)

¹⁾ Rated power of a typ. 4-pole standard induction motor based on base-load current I_L or I_H at 400 V 3 AC/50 Hz.

²⁾ Rated power of a typ. 4-pole standard induction motor based on base-load current I_L or I_H at 460 V 3 AC/60 Hz.

³⁾ The base-load current I_L is based on a duty cycle of 110 % for 60 s or 135 % for 3 s with a duty cycle duration of 300 s (see overload capability characteristics).

⁴⁾ The base-load current I_H is based on a duty cycle of 150 % for 60 s with a duty cycle duration of 300 s (see overload capability characteristics).

⁵⁾ The current values given here are based on the rated output current.

⁶⁾ If the drive closed-loop control is still to remain active when the main line supply fails, then the inverter must be provided with an external 24 V DC supply.

⁸⁾ The cabinet height increases by 300 mm for degree of protection IP21, and by 400 mm (15.7 in) for degrees of protection IP23, IP43 and IP54.

⁹⁾ The specified cabinet widths increase depending on the options selected. For details, see description of options L00 and L01.

Note:

The power data in hp units are based on the NEC/CEC standards for the North American market.

Information on the line connection, motor connection and cabinet grounding can be found in section Cable cross-sections and connections.

Line voltage 500 ... 690 V 3 AC		SINAMICS G120P Cabinet drive inverter cabinet units
		6SL3710-1PG35-8AA0-Z	6SL3710-1PG36-5AA0-Z	6SL3710-1PG37-2AA0-Z
Rated power
At I_L690 V/50 Hz ¹⁾	kW	500	560	630
At I_L575 V/60 Hz ²⁾	hp	500	600	700
At I_H690 V/50 Hz ¹⁾	kW	450	500	560
At I_H575 V/60 Hz ²⁾	hp	450	500	500
Output current
Rated current I_rated (500 V ±10 %)	A	581	654	725
Rated current I_rated (600 V ±10 %)	A	557	623	693
Rated current I_rated (690 V ±10 %)	A	535	595	665
Base-load current I_L (500 V ±10 %) ³⁾	A	569	640	710
Base-load current I_L (690 V ±10 %) ³⁾	A	520	580	650
Base-load current I_H (500 V ±10 %) ⁴⁾	A	482	523	580
Base-load current I_H (690 V ±10 %) ⁴⁾	A	444	476	532
Output current, max.	A	768	864	959
Input current
Rated current I_rated (500 V ±10 %) ⁵⁾	A	596	679	753
Rated current I_rated (600 V ±10 %) ⁵⁾	A	578	647	720
Rated current I_rated (690 V ±10 %) ⁵⁾	A	555	618	690
Base-load current I_L (500 V ±10 %) ³⁾	A	591	665	737
Base-load current I_L (690 V ±10 %) ³⁾	A	540	602	675
Base-load current I_H (500 V ±10 %) ⁴⁾	A	501	543	602
Base-load current I_H (690 V ±10 %) ⁴⁾	A	461	494	552
Input current, max.	A	798	897	995
Current requirement, 24 V DC auxiliary power supply ⁶⁾	A	1	1	1
Short-circuit current rating acc. to IEC in conjunction with the specified fuses	kA	65	65	65
Minimum short-circuit current ⁷⁾
For 3NE1 fuses	A	10000	11000	13000
For 3NA3 fuses	A	16000	20000	21000
Power loss, max. At I_rated (500 V/40 °C)	kW	9.122	9.972	11.221
Coolant		Air	Air	Air
Coolant requirements	m³/s (ft³/s)	0.7 (24.7)	0.7 (24.7)	0.7 (24.7)
Sound pressure level L_pA(1 m) at 50/60 Hz	dB	69/69	69/69	69/69
Cable length, max. between Power Module and motor
When compliant with Categories C2 and C3 according to EN 61800?3 shielded	m (ft)	100 (328)	100 (328)	100 (328)
When non-compliant with the limit values for RI suppression and without output reactor unshielded	m (ft)	200 (656)	200 (656)	200 (656)
When non-compliant with the limit values for RI suppression with output reactor shielded/unshielded	m (ft)	300/450 (984/1476)	300/450 (984/1476)	300/450 (984/1476)
Dimensions
Width	mm (in)	1200 (47.2) ⁹⁾	1200 (47.2) ⁹⁾	1200 (47.2) ⁹⁾
Height⁸⁾	mm (in)	2000 (78.7)	2000 (78.7)	2000 (78.7)
Depth	mm (in)	600 (23.6)	600 (23.6)	600 (23.6)
Frame size		JX	JX	JX
Weight (degree of protection IP20, without options)	kg (lb)	654 (1442)	697 (1537)	716 (1579)

¹⁾ Rated power of a typ. 4-pole standard induction motor based on base-load current I_L or I_H at 690 V 3 AC/50 Hz.

²⁾ Rated power of a typ. 4-pole standard induction motor based on base-load current I_L or I_H at 575 V 3 AC/60 Hz.

³⁾ The base-load current I_L is based on a duty cycle of 110 % for 60 s or 135 % for 3 s with a duty cycle duration of 300 s (see overload capability characteristics).

⁴⁾ The base-load current I_H is based on a duty cycle of 150 % for 60 s with a duty cycle duration of 300 s (see overload capability characteristics).

⁵⁾ The current values given here are based on the rated output current.

⁶⁾If the drive closed-loop control is still to remain active when the main line supply fails, then the inverter must be provided with an external 24 V DC supply.

⁸⁾ The cabinet height increases by 300 mm for degree of protection IP21, and by 400 mm for degrees of protection IP23, IP43 and IP54.

⁹⁾ The specified cabinet widths increase depending on the options selected. For details, see description of option L00.

Note:

The power data in hp units are based on the NEC/CEC standards for the North American market.

Information on the line connection, motor connection and cabinet grounding can be found in section Cable cross-sections and connections.

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания