• Connection of SIMATIC S7-300/SINUMERIK 840D powerline to Industrial Ethernet
  • Multi-protocol operation with TCP and UDP transport protocol
  • Adjustable keep-alive function
• Two separate interfaces (integrated network separation):
  • Gigabit interface with one RJ45 port with 10/100/1 000 Mbit/s, full/half-duplex with auto-sensing capability
  • PROFINET interface with two RJ45 ports with 10/100 Mbit/s full/half-duplex with auto-sensing and auto-crossover functionality via integrated 2-port switch
• Communications services via both interfaces:
  • Open communication (TCP/IP and UDP): Multicast with UDP, including routing between both interfaces
  • PG/OP communication:
    Cross-network by means of S7 routing
  • S7 communication (client, server, multiplexing) including routing between both interfaces
  • IT communication:
    HTTP communication supports access to process data via own web pages;
    e-mail client function, sending of e-mails directly from user program;
    FTP communication supports program-controlled FTP client communication;
    access to data blocks through FTP server
• Communications services via PROFINET interfaces:
  • PROFINET IO controller and IO device with real-time properties (RT and IRT)¹⁾
  • PROFINET CBA
  • IP address assignment via DHCP, simple PC tool or via program block (e.g. for HMI)
  • Configuration with STEP 7
• Media redundancy (MRP);
  within an Ethernet network with ring topology, the CP supports the media redundancy procedure MRP (V2.2 or higher).
• Access protection by means of configurable IP access list
• Module replacement without programming device;
  all information is stored on the C-PLUG (also file system for IT functions)
• Extensive diagnostic functions for all modules in the rack
• IT communication
  • Web function
  • E-mail function
  • FTP
• Integration into network management systems through the support of SNMP V1 MIB-II

1) possible combinations in parallel operation:
- IO controller with IRT and IO device with RT
- IO controller with RT and IO device using IRT

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

For technical documentation on SIPLUS, see:

http://www.siemens.com/siplus-extreme