• Connection of SIMATIC S7-300/SINUMERIK 840D powerline to Industrial Ethernet
  
  • 2 x RJ45 interface for 10/100 Mbit/s full/half-duplex connection with auto-sensing/auto-negotiation and auto-crossover function
  • Integrated 2-port real-time switch ERTEC
  • Multi-protocol operation with ISO, TCP, UDP transport protocol and PROFINET IO
  • Adjustable keep-alive function
• Communications services:
  • Open communication (ISO, TCP/IP, and UDP)
  • PROFINET IO-Controller or PROFINET IO-Device
  • PG/OP communication: Cross-network by means of S7 routing
  • S7 communication (client, server, multiplexing)
• Media redundancy (MRP);
  within an Ethernet network with ring topology, the CP supports the media redundancy procedure MRP (V2.2 or higher).
• Multicast for UDP
• IP address assignment via DHCP, simple PC tool or via the user program (e.g. HMI)
• Access protection via configurable access list
• Remote programming and commissioning via Industrial Ethernet
• Configuration with STEP 7
• Automatic setting of CPU clock setting over Ethernet with NTP or SIMATIC procedure
• Web diagnostics
• Integration in network management systems via SNMP (MIB2 diagnostics information)
• Diagnostics possibilities in STEP 7 and via web browser

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.

For further technical documentation on SIPLUS, see:

http://www.siemens.com/siplus-extreme