Siemens
ÑÐÅÄÑÒÂÀ ÏÐÎÌÛØËÅÍÍÎÉ ÀÂÒÎÌÀÒÈÇÀÖÈÈ
îôèöèàëüíûé ïàðòíåð Ñèìåíñ
Êàòàëîã ÑÀ01 2017
àðõèâíûé
(4872) 700-366
skenergo@mail.ru

SIPLUS ET 200S digital electronic modules

Article number

6AG1131-4BD01-2AA0

6AG1131-4BD01-7AB0

6AG1131-4BF00-7AA0

6AG1131-4BF50-7AA0

SIPLUS DP 4DI ET200S

SIPLUS ET200S EM 4 DI high features

SIPLUS ET200S EM 8 DI

SIPLUS ET200S EM 8 DI DC24V

Supply voltage

 

 

 

 

Rated value (DC)

  • ? 24 V DC

Yes; From power module

Yes; From power module

Yes

Yes; From power module

Reverse polarity protection

Yes

Yes

Yes

Yes

Input current

 

 

 

 

from supply voltage L+, max.

Dependent on encoder

Dependent on encoder

Dependent on encoder

Dependent on encoder

from backplane bus 3.3 V DC, max.

10 mA

10 mA

10 mA

Encoder supply

 

 

 

 

Number of outputs

0; no encoder supply

Type of output voltage

min. L+ (-0.5 V), under load

min. L+ (-0.5 V), under load

Short-circuit protection

Yes; Electronic

Output current

 

 

 

 

  • ? Rated value

500 mA

500 mA

  • ? permissible range

0 to 500 mA

0 to 500 mA

Power loss

 

 

 

 

Power loss, typ.

0.7 W

0.7 W

1.2 W

1.2 W

Address space per module

 

 

 

 

  • ? with packing

4 bit

4 bit

  • ? without packing

1 byte

1 byte

1 byte

Digital inputs

 

 

 

 

Number of digital inputs

4

4

8

8

Input characteristic curve in accordance with IEC 61131, type 1

Yes

Yes

Yes; 2-wire sensors connectable

Yes

Number of simultaneously controllable inputs

 

 

 

 

  • ? Number of simultaneously controllable inputs

8

Input voltage

 

 

 

 

  • ? Type of input voltage

DC

DC

DC

DC

  • ? Rated value (DC)

24 V

24 V

24 V

24 V

  • ? for signal "0"

-30 to +5V

-30 to +5V

-30 to +5V

-5 to +30V

  • ? for signal "1"

+15 to +30V

+11 to +30V

+15 to +30V

-15 to -30 V

Input current

 

 

 

 

  • ? for signal "1", typ.

7 mA; at 24 V

8 mA

5 mA

6 mA; at 24 V

Input delay (for rated value of input voltage)

 

 

 

 

for standard inputs

 

 

 

 

  • parameterizable

No

Yes; 0.1 / 0.5 / 3 / 15 ms

No

No

  • at "0" to "1", min.

2 ms; typically 3 ms

0.05 / 0.4 / 2.7 / 14.85

2 ms

2 ms

  • at "0" to "1", max.

4.5 ms

0,15 / 0,6 / 3,3 / 15,15

4.5 ms

4.5 ms

  • at "1" to "0", min.

2 ms; typically 3 ms

0.05 / 0.4 / 2.7 / 14.85

2 ms

2 ms

  • at "1" to "0", max.

4.5 ms

0,15 / 0,6 / 3,3 / 15,15

4.5 ms

4.5 ms

Cable length

 

 

 

 

  • ? shielded, max.

1 000 m

1 000 m

1 000 m

1 000 m

  • ? unshielded, max.

600 m

600 m

600 m

600 m

Encoder

 

 

 

 

Connectable encoders

 

 

 

 

  • ? 2-wire sensor

Yes

Yes

Yes

Yes

  • permissible quiescent current (2-wire sensor), max.

1.5 mA

1.5 mA

1.5 mA

1.5 mA

Isochronous mode

 

 

 

 

Isochronous operation (application synchronized up to terminal)

Yes; TWE = 3000 us

Yes

Interrupts/diagnostics/status information

 

 

 

 

Diagnostic functions

No

Yes

No

No

Diagnostic messages

 

 

 

 

  • ? Short-circuit

Yes; Short-circuit of outputs to ground; module by module

Diagnostics indication LED

 

 

 

 

  • ? Group error SF (red)

No

Yes

No

  • ? Status indicator digital input (green)

Yes; per channel

Yes; per channel

Yes

Yes; per channel

Parameter

 

 

 

 

Remark

1 byte

3 byte

3-byte parameter (not accessible for the user)

3 byte

Diagnostics short-circuit

Disable / enable

Potential separation

 

 

 

 

Potential separation digital inputs

 

 

 

 

  • ? between the channels

No

No

No

No

  • ? between the channels and backplane bus

Yes

Yes

Yes

Yes

Permissible potential difference

 

 

 

 

between different circuits

75 V DC/60 V AC

75 V DC/60 V AC

75 V DC/60 V AC

75 V DC/60 V AC

Isolation

 

 

 

 

Isolation tested with

500 V DC

500 V DC

500 V DC

500 V DC

Standards, approvals, certificates

 

 

 

 

CE mark

Yes

Yes

Yes

Yes

Ambient conditions

 

 

 

 

Ambient temperature during operation

 

 

 

 

  • ? min.

-25 °C; = Tmin

-25 °C; = Tmin

-25 °C; = Tmin

-40 °C; = Tmin

  • ? max.

60 °C; = Tmax

70 °C; = Tmax

70 °C; = Tmax

70 °C; = Tmax

Extended ambient conditions

 

 

 

 

  • ? relative to ambient temperature-atmospheric pressure-installation altitude

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

Relative humidity

 

 

 

 

  • With condensation, tested in accordance with IEC 60068-2-38, max.

100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)

100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)

100 %; incl. condensation / frost permitted (no commissioning under condensation conditions)

100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)

Resistance

 

 

 

 

  • against biologically active substances / conformity with EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation in corrosive atmospheres!

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

  • against chemically active substances / conformity with EN 60721-3-3

Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

  • against mechanically active substances / conformity with EN 60721-3-3

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Dimensions

 

 

 

 

Width

15 mm

15 mm

15 mm

15 mm

Height

81 mm

81 mm

81 mm

81 mm

Depth

52 mm

52 mm

52 mm

52 mm

Weights

 

 

 

 

Weight, approx.

35 g

35 g

35 g

35 g


Article number

6AG1132-4BB01-2AB0

6AG1132-4BB31-7AB0

6AG1132-4BD02-7AA0

6AG1132-4BD32-2AA0

SIPLUS DP 2DO HF ET200S

SIPLUS ET200S 2DO high feature

SIPLUS ET200S 4DO (1VE = 5 Stueck)

SIPLUS_ET200S_4DO DC24V/2A

Supply voltage

 

 

 

 

Reverse voltage protection

Yes; when using the same load voltage as on the power module

Yes; when using the same load voltage as on the power module

Yes; when using the same load voltage as on the power module

Yes; when using the same load voltage as on the power module

Load voltage L+

 

 

 

 

  • ? Rated value (DC)

24 V; From power module

24 V; From power module

24 V; From power module

24 V; From power module

  • ? Reverse polarity protection

Yes; polarity reversal can lead to the digital outputs being connected through

Yes; polarity reversal can lead to the digital outputs being connected through

Yes; polarity reversal can lead to the digital outputs being connected through

Yes

Input current

 

 

 

 

from load voltage L+ (without load), max.

5 mA; Per channel

5 mA; Per channel

10 mA; Per channel

10 mA; Per channel

from backplane bus 3.3 V DC, max.

10 mA

10 mA

10 mA

10 mA

Power loss

 

 

 

 

Power loss, typ.

0.4 W

1.4 W

0.8 W

1.6 W

Address area

 

 

 

 

Address space per module

 

 

 

 

  • ? with packing

2 bit

2 bit

4 bit

4 bit

  • ? without packing

1 byte

1 byte

1 byte

1 byte

Digital outputs

 

 

 

 

Number of digital outputs

2

2

4

4

Short-circuit protection

Yes

Yes

Yes

Yes

  • ? Response threshold, typ.

1.5 A

4 A

1 to 1.5 A

2.8 to 7.2 A

Limitation of inductive shutdown voltage to

-55 to -60 V, typ. L+( )

-55 to -60 V, typ. L+( )

o.k.

Typ. L+ (-55 to -60 V)

Controlling a digital input

Yes

Yes

Yes

Yes

Switching capacity of the outputs

 

 

 

 

  • ? on lamp load, max.

2.5 W

5 W

5 W

10 W

Load resistance range

 

 

 

 

  • ? lower limit

48 ?

12 ?

48 ?

12 ?

  • ? upper limit

3 400 ?

3 400 ?

3 400 ?

3 400 ?

Output voltage

 

 

 

 

  • ? for signal "1", min.

L+ (-1 V)

L+ (-1 V)

L+ (-1 V)

L+ (-1.0 V)

Output current

 

 

 

 

  • ? for signal "1" rated value

0.5 A

2 A

0.5 A

2 A

  • ? for signal "1" permissible range, min.

7 mA

7 mA

7 mA

7 mA

  • ? for signal "1" permissible range, max.

600 mA

2.4 A

600 mA

2.4 A

  • ? for signal "0" residual current, max.

0.3 mA

0.5 mA

0.3 mA

0.5 mA

Output delay with resistive load

 

 

 

 

  • ? "0" to "1", max.

100 µs

100 µs

45 µs; Typical value

50 µs; Typ. 45 µs

  • ? "1" to "0", max.

400 µs

400 µs

90 µs; Typical value

120 µs; Typ. 90 µs

Parallel switching of two outputs

 

 

 

 

  • ? for uprating

No

No

No

No

  • ? for redundant control of a load

Yes; per module

Yes; per module

Yes; per module

Yes; per module

Switching frequency

 

 

 

 

  • ? with resistive load, max.

100 Hz

100 Hz

800 Hz

1 000 Hz

  • ? with inductive load, max.

2 Hz

2 Hz; 0,5 H

2 Hz

2 Hz; At 0.5 H

  • ? on lamp load, max.

10 Hz

10 Hz

10 Hz

10 Hz

Total current of the outputs

 

 

 

 

  • ? Current per module, max.

1 A

4 A

2 A

4 A

Cable length

 

 

 

 

  • ? shielded, max.

1 000 m

1 000 m

1 000 m

1 000 m

  • ? unshielded, max.

600 m

600 m

600 m

600 m

Isochronous mode

 

 

 

 

Isochronous operation (application synchronized up to terminal)

Yes

Yes

Yes

Yes

Interrupts/diagnostics/status information

 

 

 

 

Diagnostic functions

Yes; Can be read out

Yes; Can be read out

No

No

Substitute values connectable

Yes; 0/1

Yes; 0/1

Diagnostic messages

 

 

 

 

  • ? Wire-break

Yes; channel by channel

Yes; channel by channel

  • ? Short-circuit

Yes; channel by channel

Yes; channel by channel

Diagnostics indication LED

 

 

 

 

  • ? Group error SF (red)

Yes

Yes

  • ? Status indicator digital output (green)

Yes

Yes

Yes

Yes

Parameter

 

 

 

 

Remark

3 byte

3 byte

1 byte

1 byte

Diagnostics wire break

Disable / enable

Disable / enable

Diagnostics short-circuit

Disable / enable

Disable / enable

Response to CPU/master STOP

Substitute a value/keep last value

Substitute a value/keep last value

Potential separation

 

 

 

 

Potential separation digital outputs

 

 

 

 

  • ? between the channels

No

No

No

No

  • ? between the channels and backplane bus

Yes

Yes

Yes

Yes

Isolation

 

 

 

 

Isolation tested with

500 V DC

500 V DC

500 V DC

500 V DC

Ambient conditions

 

 

 

 

Ambient temperature during operation

 

 

 

 

  • ? min.

-25 °C; = Tmin

-25 °C; = Tmin

-25 °C; = Tmin

-25 °C; = Tmin

  • ? max.

60 °C; = Tmax

70 °C; = Tmax

70 °C; = Tmax

60 °C; = Tmax

Extended ambient conditions

 

 

 

 

  • ? relative to ambient temperature-atmospheric pressure-installation altitude

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

Relative humidity

 

 

 

 

  • With condensation, tested in accordance with IEC 60068-2-38, max.

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

Resistance

 

 

 

 

  • against biologically active substances / conformity with EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

  • against chemically active substances / conformity with EN 60721-3-3

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

  • against mechanically active substances / conformity with EN 60721-3-3

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Dimensions

 

 

 

 

Width

15 mm

15 mm

15 mm

15 mm

Height

81 mm

81 mm

81 mm

81 mm

Depth

52 mm

52 mm

52 mm

52 mm

Weights

 

 

 

 

Weight, approx.

40 g

40 g

40 g

40 g


Article number

6AG1132-4BF00-7AA0

6AG1132-4BF50-7AA0

6AG1132-4HB12-2AB0

SIPLUS ET200S EM 8 DO

SIPLUS ET200S EM 8 DO DC24V/0.5A

SIPLUS ET200S 2DORLY 24-48VDC 230VAC/5A

Supply voltage

 

 

 

Reverse voltage protection

Yes

Yes; when using the same correctly polarized load voltage as on the power module

Load voltage L+

 

 

 

  • ? Rated value (DC)

24 V

24 V; From power module

24 V; From power module

  • ? Reverse polarity protection

Yes

Yes

Yes

Input current

 

 

 

from load voltage L+ (without load), max.

5 mA; Per channel

5 mA

30 mA

from backplane bus 3.3 V DC, max.

10 mA

10 mA

10 mA

Power loss

 

 

 

Power loss, typ.

1.5 W

1.5 W

0.6 W

Address area

 

 

 

Address space per module

 

 

 

  • ? with packing

2 bit

  • ? without packing

1 byte

1 byte

1 byte

Digital outputs

 

 

 

Number of digital outputs

8

8

2

Short-circuit protection

Yes

Yes

No

  • ? Response threshold, typ.

1.5 A

1.5 A

Limitation of inductive shutdown voltage to

Typ. L+ (-55 to -60 V)

Typ. 47 V

No

Controlling a digital input

Yes

Yes

Yes

Switching capacity of the outputs

 

 

 

  • ? on lamp load, max.

5 W

5 W

Load resistance range

 

 

 

  • ? lower limit

48 ?

48 ?

  • ? upper limit

3 400 ?

3 400 ?

Output voltage

 

 

 

  • ? for signal "1", min.

L+ (-1.0 V)

Max. 1 V

Output current

 

 

 

  • ? for signal "1" rated value

0.5 A

0.5 A

5 A

  • ? for signal "1" permissible range, min.

7 mA

5 mA

  • ? for signal "1" permissible range, max.

600 mA

600 mA

  • ? for signal "1" minimum load current

8 mA

  • ? for signal "0" residual current, max.

0.3 mA

5 µA

Output delay with resistive load

 

 

 

  • ? "0" to "1", max.

300 µs

300 µs

  • ? "1" to "0", max.

600 µs

600 µs

Parallel switching of two outputs

 

 

 

  • ? for uprating

No

No

  • ? for redundant control of a load

Yes

Yes; per module

Switching frequency

 

 

 

  • ? with resistive load, max.

100 Hz

100 Hz

2 Hz

  • ? with inductive load, max.

2 Hz

0.5 Hz

0.5 Hz

  • ? on lamp load, max.

10 Hz

10 Hz

2 Hz

Total current of the outputs

 

 

 

  • ? Current per module, max.

4 A

4 A

Relay outputs

 

 

 

Switching capacity of contacts

 

 

 

  • Thermal continuous current, max.

5 A

Cable length

 

 

 

  • ? shielded, max.

1 000 m

1 000 m

1 000 m

  • ? unshielded, max.

600 m

600 m

600 m

Isochronous mode

 

 

 

Isochronous operation (application synchronized up to terminal)

Yes; jitter incumbered < 100us

Yes

No

Interrupts/diagnostics/status information

 

 

 

Diagnostic functions

No

No

No

Substitute values connectable

Yes; 0/1

Diagnostics indication LED

 

 

 

  • ? Status indicator digital output (green)

Yes

Yes

Yes

Parameter

 

 

 

Remark

3-byte parameter (not accessible for the user)

3 byte

Response to CPU/master STOP

Substitute a value/keep last value

Potential separation

 

 

 

Potential separation digital outputs

 

 

 

  • ? between the channels

No

No

Yes

  • ? between the channels and backplane bus

Yes

Yes

Yes

  • ? Between the channels and load voltage L+

Yes

Isolation

 

 

 

Isolation tested with

500 V DC

500 V DC

tested with

 

 

 

  • ? Channels against backplane bus and load voltage L+

1500 V AC

  • ? Load voltage L+ against backplane bus

500 V DC

Ambient conditions

 

 

 

Ambient temperature during operation

 

 

 

  • ? min.

-40 °C; = Tmin

-25 °C; = Tmin

-25 °C; = Tmin

  • ? max.

70 °C; = Tmax

70 °C; = Tmax

60 °C; = Tmax

Extended ambient conditions

 

 

 

  • ? relative to ambient temperature-atmospheric pressure-installation altitude

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)

Relative humidity

 

 

 

  • With condensation, tested in accordance with IEC 60068-2-38, max.

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

Resistance

 

 

 

  • against biologically active substances / conformity with EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

  • against chemically active substances / conformity with EN 60721-3-3

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

  • against mechanically active substances / conformity with EN 60721-3-3

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Dimensions

 

 

 

Width

15 mm

15 mm

15 mm

Height

81 mm

81 mm

81 mm

Depth

52 mm

52 mm

52 mm

Weights

 

 

 

Weight, approx.

40 g

40 g

50 g


















skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Àðìàòóðà DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Äàò÷èêè è èçìåðèòåëè

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ðåãóëÿòîðû è ðåãèñòðàòîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ïíåâìàòè÷åñêîå îáîðóäîâàíèå

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Êðàíû è Êëàïàíû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Èçìåðèòåëüíûå ïðèáîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ñèñòåìû áåñïðîâîäíîãî óïðàâëåíèÿ «óìíûé äîì»

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Áåñêîíòàêòíûå âûêëþ÷àòåëè Êîíå÷íûå âûêëþ÷àòåëè Îïòè÷åñêèå äàò÷èêè Ýíêîäåðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Óñòàíîâêà óìÿã÷åíèÿ

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Óñòàíîâêà îáåçæåëåçèâàíèÿ
Êàòàëîã îáîðóäîâàíèÿ 2017




  © ÎÎÎ "ÑÊ ÝÍÅÐÃÎ" 2007-2022
  (4872) 700-366  skenergo@mail.ru
ßíäåêñ.Ìåòðèêà