DRIVE-CLiQ cables

are used to connect components with DRIVE-CLiQ connections which have a separate or external 24 V DC power supply.

DRIVE-CLiQ cables for connecting Line/Motor Modules with a Control Unit are part of the scope of supply of the relevant modules.

MOTION-CONNECT DRIVE-CLiQ cables

are used whenever components with DRIVE-CLiQ connections must meet high requirements such as mechanical stress and oil resistance, e.g. when connections are made outside the cabinet between

• Motor Modules and Sensor Modules
• Motor Modules and motors with DRIVE-CLiQ interface

MOTION-CONNECT DRIVE-CLiQ cables have 24 V DC cores.

MOTION-CONNECT pre-assembled cables

are used whenever motor encoders on motors without DRIVECLiQ interface are connected to Sensor Modules.

Note: All 6FX.002-2C... signal cables are also available with crimped contacts and connector housing supplied as a separate accessory.

• Signal cables with enclosed connector enclosure for the motor end. In this case, the 6th position of the Order No. must be changed from 0 to 4:
  6FX.042-2C...-....
• Signal cables with enclosed connector enclosure for the module end. In this case, the 6th position of the Order No. must be changed from 0 to 1:
  6FX.012-2C...-....